Products

PEL-PHOS™ LP-700 is a phosphate ester of ethoxylated phenol. It is an exceptionally effective extreme pressure lubricant for metal working formulations. It also functions as a corrosion inhibitor and as a hydrotrope in detergent preparations.

PEL-AMPH™ LDP is suggested for systems where sodium chloride would be detrimental to the performance of the final product or would cause corrosion problems. PEL-AMPH™ LDP is stable over the entire pH range and is used as a detergent & hydrotrope in high electrolyte systems. The product finds use in mild surfactant systems as well as hard surface cleaners. PEL-AMPH™ LDP helps wetting and solubilization in systems containing phosphate and polyphosphates. PEL-AMPH™ LDP useful as a corrosion inhibitor in aqueous systems. PEL-AMPH™ LDP is a high-foaming, salt-free amphoteric surfactant with good detergency.

PEL-PHOS™ LP-300 Is a low-foaming aromatic phosphate ester with hydrotrope properties. It is a highly efficient agent for coupling nonionic surfactants into built hard surface cleaners. It is useful for cleaning formulations intended for metal & bottle-washing. When incorporated into metal cutting formulations, PEL-PHOS™ LP-300 provides extreme pressure lubricity due to its phosphate functionality.

PEL-AMPH™ 2CY-75 is an amphoteric derived from caprylic hydroxyethyl imidazoline. It has excellent wetting and detergent properties while providing low foam. PEL-AMPH™ 2CY-75 has good stability in strongly alkaline and moderately acid systems. It is recommended for use in areas where low foaming detergency is needed such as, dairy cleaning, food processing plants, etc. PEL-AMPH™ 2CY75 is compatible with most all other surfactants. It is also an excellent solubilizer for higher molecular weight surfactants, particularly nonionics. Its low irritation properties make it ideal for personal care wipes.

PEL-AMPH™ ODP is a 50% active aqueous solution of a low molecular weight amphoteric surfactant. It acts as an effective hydrotrope to couple nonionic surfactants into systems containing high levels of electrolyte. PEL-AMPH™ ODP is a low foamer that provides good detergency in systems that require high cloud points. It is stable in both highly acid and alkaline systems offering utility in acid cleaners and heavily built detergents.

PEL-PHOS™ 583 a water soluble phosphate ester that exhibits both hydrotrope and detergent properties. It is an ideal ingredient for coupling nonionics into moderately built, alkaline detergent systems. It finds particular use for metal cleaning. It is compatible with the typical builders used including pyrophosphates, silicates, carbonates, etc.

PEL-SIL™ 648 reduces the surface tension of aqueous solutions significantly lower than conventional nonionic surfactants can. Even at concentrations as low as 0.01 percent, PEL-SIL™ 648 will reduce surface tension below 23 dynes/cm. It produces very rapid wetting and spreading on hard-to-wet surfaces such as waxy leaves. PEL-SIL™ 648 allows complete coverage with herbicides, insecticides, fungicides and other agricultural chemicals. It is a low molecular weight nonionic silicone polyether surfactant, developed to improve the wetting, spreading and penetration of agricultural chemicals. It may be used as an ingredient in pesticide products, or as a tank-mix adjuvant for foliar applied chemicals. PEL-SIL™ 648 meets the requirements of US EPA regulation 40 CFR 180.910 regarding “tolerances and exemption from tolerances for pesticide chemicals in or on raw agricultural commodities.” It is approved for both food and nonfood use.