Knowde Enhanced TDS
Identification & Functionality
- Carrier
- INCI Name
- Cosmetic Ingredients Functions
- Technologies
Features & Benefits
- Benefit Claims
- Product Features
Galaxy™ SN 8215 differs from soap noodles in many ways:
- Forms a rich lather with excellent stability even in hard water
- Ease in processing
- pH balanced, tailored to any skin type
- Suitable for sensitive skin
- Imparts smoothness, softness to skin
- Compatible with commonly used syndet claim ingredients such as moisturizing agents, vitamins, minerals and pharma actives / skin care performance chemicals
Applications & Uses
- Markets
- Bath & Shower Applications
- Applications
Typical formulation for final syndet bar using Galaxy™ SN 8215:
- Galaxy™ SN 8215 : 95 parts
- Additives / other ingredients : 2 parts
- Water : 2 parts
- Perfume : 1 part
- Color : as per need
- Total : To 100
Mixing: Galaxy™ SN 8215 is loaded into an amalgamator. A high mixing efficiency should be obtained by sigma mixer or mixer kneader. Add given quantity of special additives or ingredients, water, perfume and color and blend thoroughly in the mixer. The mixing time can vary based on the special ingredients to be mixed. This time is determined experimentally.
Refining: Refining can be done by passing above mass through various line arrangements, such as refiner and roll mill. The refining unit should be provided with cooling water circulation. The temperature of the cooling water can be maintained at room temperature for most of the formulations. However, some specific formulations may need chilled water. The refiner should be fitted with a coarse refining screen and the mass is fed at about 36 - 40°C.
Extruding: When extrusion / finishing lines use duplex vacuum plodders for final refining and air free extrusion of syndet bars, the exit temperatures of the extruded mass leaving the first plodder and the final plodder have to be between 35 - 40°C and 40 - 50°C respectively. The temperature of the body of the first and second plodder should be maintained between 15 - 25°C. The extrusion head temperature has to be kept between 50 - 65°C, depending upon the size and design of the head.
Properties
- Solubility
- Appearance
- White to off-white granules
- Odor
- Characteristic
- Compatible with
- Syndet claim ingredients
- Specifications
| Value | Units | Test Method / Conditions | |
| pH (2% aqueous solution) | 5.5 - 6 | — | — |
| Active Matter (mol.wt. 365) | min. 40 | % by mass | — |
| Moisture Content | max. 7.0 | % by mass | — |
| Total Fatty Matter | min. 40 | % by mass | — |
Safety & Health
- Safety Information
- Spills should be contained / collected and disposed off as per the regulations.
- Avoid ingestion and direct inhalation (where air concentration is high, appropriate mask is suggested).
- Avoid contact with eyes, skin and clothing.
- In case of contact with eyes, seek adequate and timely medical attention.
Packaging & Availability
- Packaging Type
- Packaging Information
- Galaxy™ SN 8215 is available in HDPE lined paper bags of 30 kg net wt.
- Total of 560 bags palletized i.e. 16.8 MT or 600 bags non-palletized i.e. 18 MT can be shipped in 20 ft. full container load.
Storage & Handling
- Shelf Life
- 1 year
- Storage and Handling Conditions
- Keep the material in a clean dry place, away from heat and direct sunlight.
- Store below 35°C. Keep the bags tightly closed. In original sealed containers, the product can be stored for at least 1 year.
- During storage, maximum 7 bags (non-palletized) can be stacked and for palletized, single pallet on ground or in rack.