Knowde Enhanced TDS
Identification & Functionality
- Base Oil Type
- Product Type
- Technologies
- Product Families
- Composition
Utilizing highly refined base stocks and blended with top quality additives which include:
- Oxidation inhibitors
- Corrosion inhibitors
- Rust inhibitors
- Anti-wear agents
- Anti-foam agents
- Pour point depressants
Features & Benefits
- Ready-to-Use Product Features
- Performance Characteristics
- High viscosity index
- Shows very little flow rate change regard-less of changes in temperature
- Helps to prevent loss of pressure around seals
- Prevents oxidation which can clog small orifices, tightly fitted parts and lead to corrosion of metal surfaces
- Special additives prevent rust from forming by providing a protective film on metal surfaces
- Reduces fluid operating temperatures
- Provides better overall mechanical efficiency combined with less power consumption
- Extremely inexpensive due to its long life and reduced wear and tear on parts
Applications & Uses
- Applications
- Application Area
- Compatible Substrates & Surfaces
- Uses
- Far exceeds the anti-wear requirements for Vickers Pumps as shown in the Vickers
- Pump Test and also meets their requirement for a "high zinc" type anti-wear hydraulic oil
- Fully approved by Sperry-Vickers and by Denison Pump Division under both their HP-2 and HP-0 specifications
- Meets and exceed the requirements of Cincinnati Milacron
- Applications
- Construction equipment
- Mining equipment
- Cranes
- Plant hydraulics
- Deck & cargo handling equipment
- Logging equipment
- Drilling equipment
- Winches
- Draglines
- Gear boxes & bearings
- Air compressors
- Hydraulic platforms
Properties
- Specifications
| Value | Units | Test Method / Conditions | |
| A.P.I. Gravity | 33.2 | — | — |
| Copper Corrosion | 1.0 | — | ASTM D130 |
| Density | 7.16 | Pounds/Gallon | — |
| Flash Point | 360.0 | °F | — |
| Pour Point | -25.0 | °F | — |
| Rust Test | Pass | — | ASTM D665 |
| Viscosity (Typical, 100°C) | 94.0 | SUS | — |
| Viscosity (Typical, 210°C) | 40.0 | SUS | — |
| Viscosity Index | 95.0 | — | — |