Knowde Enhanced TDS
Identification & Functionality
- Backing Material Type
- Foam Type
- Product Type
- Technologies
Features & Benefits
- Ready-to-Use Product Features
- Features & Benefits
- Tested and approved to AAMA 810.1 expanded cellular glazing tapes
- Clean, waste free substitute for liquid sealants.
- Excellent fungi, oxidation and weather resistance
- UV resistant
- Resistant to fire, most chemicals, acids and solvents
- FMVSS-302: Pass
Applications & Uses
- Applications
- Applications
- Long life seal against air, moisture, light and dust penetration
- Good for aluminum and wood windows and other applications with very stable glazing pockets
- Refrigerators, commercial windows and doors, store front glazing
- Insulation in thermal and electrical applications
- Absorbs shocks, cushions, deadens sound and eliminates excess vibration
- Maintains a seal in high movement joints.
- Completely seals out air, moisture, light and dust when compressed 30% or more
Properties
- Color
- Typical Properties
Value | Units | Test Method / Conditions | |
Thickness | 1/16, 1/8, 3/16, 1/4, 3/8, 1/2 | inch | — |
Material/Substrate | Polyvinyl Chloride (PVC) | — | — |
Density | 15.0 | lb/ft3 | |ASTM D1667 |
Hardness | 40.0 | Shore D | ASTM D2240 |
Liner | 84# poly coated brown kraft | — | — |
Adhesive System | Permanent Adhesive | — | — |
Adhesive Side | Double Sided Adhesive | — | — |
Adhesive Type | Acrylic (Emulsion based) | — | — |
Adhesion To Steel (1 Mil Pet Film) | min. 2 | lb/in | ASTM D1000 |
Thermal Conductivity | 0.3 | btu/(h-ft.°F) | ASTM C518 |
Tensile Strength | 80.0 | psi | ASTM D412 |
Water Absorption | 1.0 | % | GTP (1) |
Weather Resistance | Excellent | — | — |
Compression Deflection (25%) | 7.0 | psi | ASTM D1667 |
Flame Retardant | Yes | — | — |
Fmvss-302 | Pass | — | — |
Regulatory & Compliance
- Quality Standards
Technical Details & Test Data
- Technical Data
TECHNICAL DATA VALUE TEST METHOD/STANDARD
COMPRESSION SET @ 25% 8% ASTM D1667 ELONGATION 160% ASTM D412 RECOMMENDED APPLICATION TEMPERATURE 50°F to 110°F SERVICE TEMPERATURE -30°F to 200°F AAMA 810.1 Pass ACID RESISTANCE GOod CHEMICAL RESISTANCE Excellent FUNGI RESISTANCE Excellent OXIDATION RESISTANCE Excellent SOLVENT RESISTANCE Excellent UV RESISTANCE Excellent Note:Available with S3 solvent based acrylic adhesive with high performance for temporary load bearing assemblyrequirements.