Knowde Enhanced TDS
Identification & Functionality
- Polymer Name
- Technologies
- Product Families
- STYRENE-BUTADIENE RUBBER - HIPREN® EM
It is produced in the HIP-Petrohemija under the license from Bunawerke Hülls (Germany) and engineering made by Lurgi (Germany).
Features & Benefits
- Characteristics Of Vulcanized Rubber
Conditions:
- Vulcanisation temperature 145oC
- Vulcanisation time 35 min
- Test specimen S1
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
Properties
- Physical Form
- Mechanical Properties
- Typical Properties
- Vulcanization Properties
- Typical Vulcanisation Properties
- Standard test recipe: ASTM D 3185
- Mixing procedure: ASTM D 3182
- Carbon black: IRB 9 (types 1500T, 1502T); IRB 7 (type 1723)
- Curemeter test: Rheometer MDR 2000
- Conditions: Temperature 160oC, Arc 0.5o
Value | Units | Test Method / Conditions | |
Tensile Strength At Break | min 19.0 | MPa | ASTM D 412 |
Elongation At Break | min 350 | % | ASTM D 412 |
Modulus 300% | 13.7 | MPa | ASTM D 412 |
Rebound Resilience | min 30 | % | ASTM D 7121 |
Hardness | 64 | Shore A | ASTM D 2240 |
Value | Units | Test Method / Conditions | |
Mooney Viscosity (ML1+4/100C) | 49 | MJ | ASTM D 1646 |
Bound Styrene | 23.5 | % weight | ASTM D 5775 |
Ash | 0.4 | % weight | ASTM D 5667 |
Soap | 0.5 | % weight | ASTM D 5774 |
Organic Acid | 4.5 | % weight | ASTM D 5774 |
Volatile Matter | 0.5 | % weight | ASTM D 5668 |
Stabilizer | 0.4 | % weight | Internal |
ETA extract | 32 | % weight | ASTM D 5774 |
Value | Units | Test Method / Conditions | |
ML | 2.4 | dNm | ASTM D 5289 |
MH | 16.5 | dNm | ASTM D 5289 |
ts1 | 3.5 | min | ASTM D 5289 |
t50% | 6.8 | min | ASTM D 5289 |
t90% | 13 | min | ASTM D 5289 |
Regulatory & Compliance
- Certifications & Compliance
- REACH
HIP-Petrohemija with applying the existing standards ISO 9001, ISO 14001, ISO 45001 and ISO 50001 follows completely the highest standards by which human health and safety protection and environmental protection are regulated and herewith it expresses its intention to meet all the requirements which are prescribed by REACH regulation. Registration of all the substances of potential export interest has been made with European Agency for Chemicals in Helsinki, in accordance with the prescribed deadlines, therefore in this way it enables undisturbed placement and sale of HIPPetrohemija’s products without any limits at EU Market. As the Only Representative for HIP-Petrohemija in EU, according to Article 8 of REACH regulation, ReachLaw Ltd, Helsinki, Finland has been designated.
Packaging & Availability
- Packaging Type
- Packaging
HIPREN® is produced in the form of bales 30.0±0.5kg each.The bales are wrapped in a PE film foil and they can be processed together with it. The bales are laid into wooden boxes, covered inside with cardboard and polyethylene sack, which protect bales in the box. One box contains 30 bales with total polymer weight of 900 kg. Packaging of bales in metal boxes is also available Bales are wrapped in a PE film foil and they can be processed together with it. The bales are laid into metal box - pallets with polyethylene bag in it, which protect bales in the box. One box contains 33 or 40 bales with total polymer weight of 990 or 1200 kg respectively.
Storage & Handling
- Storage
The packed rubber is protected against contamination and atmospheric moisture. It is supposed to be stored in a dry place on temperatures below 300C and not exposed to direct sunlight. The product shall retain its properties for not longer than one year period provided these conditions are fulfilled at any time during this period. The manufacturer shall not be held responsible for any damage resulting from inappropriate storage of the product.