Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
company tower banner
Hydro Balance Corporation Company Logo

Hydro Balance Corporation PRE-CLEAN

PRE-CLEAN is Coil & Component Parts Cleaner, H.V.A.C. System Cleaner Leaves no residue; use prior to applying anti-foulant treatments such as coil and duct spray (H-9501). Danger: Severe skin burns and eye damage. Only for professional use. Keep out of the reach of children. Additional precautions can be found in the side panels.

Product Type: Cleaner

Application Area: Coils, Machine Parts

Certifications & Compliance: SARA 311/312

Technical Data SheetSafety Data Sheet
  • TypeDocument Name
View All Documents

Knowde Enhanced TDS

Identification & Functionality

Product Type

Cleaner

Technologies

Ready-to-Use Products

Product Families

Ready-to-Use Products — Cleaners

Other Cleaners

Features & Benefits

Labeling Claims

Acid-free,

Residues-free

Applications & Uses

Markets

HI&I Care

Applications

HI&I Care — Home Care

Surface Care

HI&I Care — Institutional & Industrial Care

Industrial Cleaning

Application Area

Coils,

Machine Parts

Application Method

Spray

Mix 1 Part Cleaner For

4 parts water

Directions for Use

Window Units, Small Central Units:

  • Dilute with at least 4 parts water.
  • Shut unit off.
  • Spray coil thoroughly using enough liquid to cause contamination to run off coil.
  • Turn on blower to reduce drying time.
  • Apply EVER-CLEAN COOLING COIL ANTI-FOULANT(H-9901 or H-9932) for increased indoor air quality (IAQ) protection.

Hydro Balance Corporation PRE-CLEAN - Directions For Use

Commercial Systems, Air Handling Units

Dilute with at least 4 parts water. If possible leave air flow on during application. Spray intake side of coil with coarse spray until saturated to the run-off point (Suction of system will cause complete coil penetration). Refuse and contamination will drain as condensate. If it is not possible to leave air flow on during application, spray coil thoroughly and turn air on immediately after application.

PRE-CLEAN should also be used on other system components such as blowers, housings, baffles, condensate pans and sheet metal duct work. Remove loose lint and particulate with brush or vacuum and spray or swab solution on surfaces to be treated. Rinse or wipe contaminated cleaning solution, allow to dry throughly.

Apply EVER-CLEAN COOLING COIL ANTI-FOULANT(H-9901 or H-9932) for increased indoor air quality (IAQ) protection.

Properties

Physical Form

Liquid

Regulatory & Compliance

Certifications & Compliance

SARA 311/312

Chemical Inventories

TSCA (USA)

Safety & Health

Safety

Danger

Causes severe skin burns and eye damage. Do not breathe mist/vapors/spray. Wash face, hands, and any exposed skin thoroughly after handling. Wear protective gloves/protective clothing/eye protection/ face protection.

First Aid

  • If swallowed,  rinse mouth. Do not induce vomiting.
  • If on skin (or hair), take off immediately all contaminated clothing. Rinse skin with water/ shower. Wash contaminated clothing before reuse.
  • If inhaled, remove person to fresh air and keep comfortable for breathing.
  • If in eyes, rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a doctor.

Packaging & Availability

Packaging

1 gallon.

Storage & Handling

Storage

Store locked up. Dispose of contents and container in accordance with all local, regional, and national regulations.