company tower banner

Products

Indestructible Paint

Coatings & FinishesApplications

Aerospace Coatings

Aerospace Coatings

Marine Coatings

Marine Coatings

6 Products found on Indestructible Paint in Coatings & Finishes

TDSWith TDS

Indestructible Paint EPWA27 Abradable Attrition Coatings banner

Indestructible Paint EPWA27 Abradable Attrition Coatings

Ready-to-Use Product Type:Epoxy Coating, 2K (2 component) Coating
Features:Oil Resistant, Abrasion Resistant, Solvent Resistant
Chemical Family:Epoxy & Epoxy Derivatives

EPWA27 Abradable Attrition Coatings is also known as PX/HX 443D. It is a graphite-filled two-part attrition compound that has almost totally replaced an earlier multi-coat spray system. An alternative version is EPWA27 is available that was designed to provide a 1:1 mix ratio. This product is not formally adopted but it represents an identical composition to EPWA27 when the two parts are mixed.

Indestructible Paint 06679 Cellulose Stoving Lacquer banner

Indestructible Paint 06679 Cellulose Stoving Lacquer

Ready-to-Use Product Type:Epoxy Coating, Lacquers
Compatible Substrates & Surfaces:Brass, Metal
Features:Low Temperature Curing
Application Method:Spray, Roller, Dip Coating
Chemical Family:Epoxy & Epoxy Derivatives

06679 Cellulose Stoving Lacquer is a single pack modified epoxy stoving lacquer.

Indestructible Paint 27497 Stoving Lacquer banner

Indestructible Paint 27497 Stoving Lacquer

Ready-to-Use Product Type:Lacquers
Compatible Substrates & Surfaces:Brass, Metal
Features:High Clarity, High Hardness, High Performance, Chemical Resistant, Outdoor Durability, Good Adhesion, High Gloss
Application Method:Spray, Roller, Dip Coating

27497 Stoving Lacquer is a high performance lacquer with outstanding hardness, adhesion & chemical resistance.

Indestructible Paint Adiprene-LW-520 / Ethacure 100 Erosion Resistant Coating banner

Indestructible Paint Adiprene-LW-520 / Ethacure 100 Erosion Resistant Coating

Ready-to-Use Product Type:2K (2 component) Coating
Features:Water Resistant, Good Erosion Resistance, Abrasion Resistant, Outdoor Durability
Application Area:Aerospace Engines
Application Method:Spray

Adiprene-LW-520 / Ethacure 100 Erosion Resistant Coating is a poly-ether based liquid coating prepared with an aliphatic diisocyanate that yields a tough flexible coating.

Indestructible Paint IP9134 Aluminium Loaded Polyimide (PL165) MSRR9134 banner

Indestructible Paint IP9134 Aluminium Loaded Polyimide (PL165) MSRR9134

Product Type:Enamel
Application Area:Marine Applications, Aerospace Engines
Features:Heat Resistance, Automotive Fluid Resistant, Corrosion Resistant, Wide Temperature Operating Range
Chemical Family:Polyimides (PI)

IP9134 Aluminum Loaded Polyimide (PL165) MSRR9134 is a highly heat resistant aluminum loaded polyimide stoving enamel with a good, marine environment, corrosion and aircraft fluid resistance. The coating is suitable for the operating temperature of up to 570⁰F.

Indestructible Paint 19335 Air Drying Clear Cellulose Lacquer banner

Indestructible Paint 19335 Air Drying Clear Cellulose Lacquer

Product Type:Lacquers
Application Method:Spray, Dip Coating
Compatible Substrates & Surfaces:Metal, Brass
Features:Rapid Drying Properties, Glossy Surface Aspects

19335 Air Drying Clear Cellulose Lacquer is designed to provide a rapid drying glossy protective coating. It is ideal for use where rapid handling after the coating is a requirement. It is suitable for dip and spray application.