Products

PM® 308 is 100% active polymeric dispersant designed for inorganic pigments such as TiO2 and iron oxide in solvent-based ink. It allows for higher pigment loading while keeping the ink at a good flow and storage stability.

PM® 304 is 100% active defoamer with silicone fluid and powdered silica. Suitable for solvent base and non-solvent system, exhibiting excellent defoaming property with low dosage. Especially for high viscosity and color coatings and inks.

PM® 306 is 50% active phosphoric polyester dispersant designed for inorganic pigments such as TiO2 in solvent-based coatings and printing inks. It allows for higher pigment loading while keeping the coatings at a good flow and storage stability.Strong reduction of millbase viscosity.

PM® 307 50% active polymeric dispersant for solvent-based coatings and pigment concentrates. Stabilizes pigments of all types. Broad compatibility for all-purpose solvent-borne pigment concentrates on the basis of aldehyde and acrylate grinding resins.

PM® 303 is 1% active solution of silicone defoamer for non-solvent and solvent-borne coatings, printing inks. Standard silicone defoamer for all solvent-borne systems. Good balance between effectiveness and compatibility.

PM® 309 is 100% active polymeric dispersant for organic and inorganic pigment dispersion in solvent-based system, with low product dosage, efficient dispersion of the organoclay powder, low foaming properties, and excellent stability performance when used in a pre-gel.