Products

PM® 311 is 100% active polymeric dispersant designed to achieve a blue tone ultra high black for carbon black.It also shows very good result dispersing other organic pigments for superior tinting strength,gloss,and rheological property.

PM® 301 is non-silicone leveling agent with 70% active fluorin-containing polyacrylate which have good wetting, flow and leveling properties. Improves hand feel and effectively prevents defects such as crater, pin hole, and fish eye and have no adverse effect on inter-layer adhesion or recoatability.

PM® 310 is 100% active polymeric dispersant which will improve pigment dispersion stability in liquid organic media.

PM® 303 is 1% active solution of silicone defoamer for non-solvent and solvent-borne coatings, printing inks. Standard silicone defoamer for all solvent-borne systems. Good balance between effectiveness and compatibility.

PM® 306 is 50% active phosphoric polyester dispersant designed for inorganic pigments such as TiO2 in solvent-based coatings and printing inks. It allows for higher pigment loading while keeping the coatings at a good flow and storage stability.Strong reduction of millbase viscosity.

PM® 309 is 100% active polymeric dispersant for organic and inorganic pigment dispersion in solvent-based system, with low product dosage, efficient dispersion of the organoclay powder, low foaming properties, and excellent stability performance when used in a pre-gel.

PM® 304 is 100% active defoamer with silicone fluid and powdered silica. Suitable for solvent base and non-solvent system, exhibiting excellent defoaming property with low dosage. Especially for high viscosity and color coatings and inks.

PM® 313 is 40% active polymeric dispersant designed to have a broadbased resin compatibility. It shows outstanding performance in grinding carbon black as well as organic pigments in solvent paint for superior tinting strength,gloss,and rheological property.

PM® 302 is non-silicone leveling agent with 70% active polyacrylate which have good flow and leveling property. Effectively prevents defects such as crater, pin hole, and fish eye and have no adverse effect on inter-layer adhesion or recoatability.

PM® 305 is 80% active polyester designed for improving adhesion of paint film especially on non-ferrous substrates and mainly used in stoving coatings.

PM® 308 is 100% active polymeric dispersant designed for inorganic pigments such as TiO2 and iron oxide in solvent-based ink. It allows for higher pigment loading while keeping the ink at a good flow and storage stability.

PM® 312 is 100% active polymeric dispersant which will improve pigment dispersion and stability in liquid organic media, and is recommended for use in solvent-based pigment concentrates for general industrial paints.