Knowde Enhanced TDS
Identification & Functionality
- CASE Ingredients Functions
- Fluids & Lubricants Functions
- Technologies
Applications & Uses
- Applications
- Fluids & Lubricants Type
- Fluids & Lubricants End Use
- Application
Kancide 6992 is suitable for the wet-state preservation of a wide range of aqueous products including paints, polymer emulsions, adhesives, ceramic glazes, fillers and sealants and as a tank side additive for ready-diluted metalworking fluids. Normal use concentrations are in the range 0.05 - 0.40%, depending on the product to be protected and the environmental conditions to which it will be exposed. The local Kimberlite Technical Center can assist in determining the precise concentration required for specific applications.
- Method of use / Compatibility
Kancide 6992 can be added at any time during manufacturing. However, it is advised to add it as early as possible to give protection throughout the production process. Care should be taken to ensure that temperature, pH and redox potential at the point of addition are suitable for stability of the product. Kancide 6992 is compatible with most formulations in which its application is recommended. Reducing agents amines and other strong nucleophiles can cause degradation of the active ingredients. Users are therefore advised to carry out their own tests or seek further advice from Kimberlite prior to initial application. Stable in the presence of light, over ph range 2-9 and temperature up to 60°C.
Properties
- Physical Form
- Odor
- Mild
- Appearance
- Colorless to Pale Yellow Clear Liquid
- Soluble in
- Water, Glycols and Lower Alcohols
- Typical Properties
Value | Units | Test Method / Conditions | |
Density | 1.020-1.032 | g/cm3 | — |
pH at 200 ° C | 2.0-3.0 | — | — |
Refractive Index | 1.3380 - 1.3440 | — | — |
Safety & Health
- Safety / Labelling / Toxicology
- Protective Clothing: Normal precautions should be applied including the wearing of protective clothing, rubber gloves and eye protection. Contact with skin, eyes and mucous membrane should be avoided.
- R & S Phrases: For information regarding the risk and safety phrases of Labeling Kancide 6992 and labeling of products to which it may be added please refer to the separate Material Safety Data Sheet or Seek specific advice from Kimberlite technical service department.
Packaging & Availability
- Packaging Type
- Packing, Availability & Transportation
- 30 and 200 kgs plastic drums
- Ex stock in the above Packing
- Kancide 6992 is classified as non - hazardous for transport
Storage & Handling
- Shelf Life & Storage
- 18 months from production date when stored at approximately 20°C from the date of manufacturing
- Protect from extremes of temperature