Products

K-FLEX® UD-320-100 a 100% solids version of K-FLEX® UD-320 recommended for prepolymer synthesis and 100% solids WB/SB melamine crosslinked systems or 2K PU. Used for preparation of polyester polyurethanes or alkyd polyurethanes. It provides hardness and exterior durability.

K-FLEX® A307 is a low viscosity, 100% solids linear, saturated, aliphatic polyester diol. This product is designed as a flexibility modifier for acrylic/isocyanate and acrylic/melamine systems.

K-FLEX® A308 is a low-viscosity polyester diol designed as a flexibility modifier for acrylic/isocyanate and acrylic/melamine systems. K-FLEX® A308 provides good hardness and adhesion while allowing lower VOC levels.

K-FLEX® UD-320 is a high solids, aliphatic, low molecular weight urethane diol oligomer. It is soluble in polar organic solvents and has broad compatibility with acrylic, polyester, and alkyd resins. K-FLEX® UD-320 will increase the hardness of a melamine crosslinked system. When used to modify a 2-component polyurethane, it will increase hardness and flexibility. K-FLEX® UD-320 responds best to a zirconium chelate catalyst when used in isocyanate crosslinked systems.

K-FLEX® 148 is a lower viscosity version of K-FLEX® 188 designed for formulating higher solids content with good hardness and increased flexibility.

NACURE® 3525 is an amine neutralized Dinonylnaphthalenedisulfonic acid (DNNDSA) catalyst that utilizes a slower releasing amine for higher bake temperatures. NACURE® 3525 is formulated for increased solubility, especially in high solids polyester and alkyd formulations.

DISPARLON® P-467 is a strong silicone-free defoamer based on vinyl polymers specifically developed for use in roller and squeegee applied floor coatings and high solids systems.

DISPARLON® LS-430 is a surface control additive based on a specially prepared silicone polymer. This product has the unique ability to eliminate cratering caused by various kinds of dirt/stain or spray mists. Effective in waterborne systems.

DEOGRIP® MICRO A 2010 is a matting, soft feel and antislip agent.

NACORR® 1351 is a liquid corrosion inhibitor based on the calcium salt of an aromatic sulfonic acid. NACORR® 1351 promotes pigment dispersion when a small amount is used in the grind, thereby reducing grind time, increasing pigment loading, and improving color strength. It improves gloss properties when used as a dispersant in the grind.

DISPARLON® OX-883HF is a defoaming/anti-popping agent based on a specially prepared acrylic polymer supplied in a HAPs free carrier. This product becomes well dispersed as fine droplets giving good anti-pop and defoaming properties solvent-based industrial bake systems.

K-CURE® 1040 is a solution of para-Toluenesulfonic acid (p-TSA) in isopropanol manufactured with a high quality grade of acid to provide optimum properties.

K-KAT® 348 is a versatile, efficient bismuth carboxylate catalyst that can be used as an alternative to DBTDL in 2K and 1K polyurethane systems. It provides similar properties to organotin catalysts without environmental drawbacks. It is also a non-persistent catalyst that is effective for resin synthesis.

DISPARLON® LAP-20 is an acrylic polymer based anti-popping/defoaming agent developed specifically for intermediate to high polarity coatings like high-solid baking systems.

NACORR® 1551 is a liquid corrosion inhibitor based on the zinc salt of an aromatic sulfonic acid offering good stability and enhanced cure rate of amino crosslinked systems.

K-FLEX® UD-350W is an aqueous solution of an aliphatic, low molecular weight urethane diol oligomer. It is recommended as a modifier for amino crosslinked water soluble and emulsified acrylic, alkyd, urethane and polyester resins. K-FLEX® UD-350W can be used as a reactive cosolvent replacement to increase solids, crosslink density, improve film/resistance properties and flow/leveling.

K-FLEX® XM-332 is an ultra low-viscosity polyester polyol modifier resin designed to provide improved flexibility in solvent-based, high solids and solventless systems. Compared to other K-FLEX® polyester diols, XM-332 produces the softest films. K-FLEX® XM-332 is recommended for use in air dry/force dry 2-component polyurethanes and blocked isocyanate systems.

NACURE® 1557 is an amine blocked Dinonylnaphthalenesulfonic acid (DNNSA) catalyst specially formulated for reduced blistering in thicker films cured at high temperatures.

DISPARLON® L-1982N is a silicone-free acrylic polymer surface-control additive for leveling and wetting in medium polarity systems. Recommended for high solids alkyd coatings as well as epoxy and phenolic applications.

DISPARLON® LHP-95 is a silicone-free surface control additive based on specially prepared acrylic and vinyl polymers. These products have unique properties that allow them to eliminate cratering caused by various kinds of surface contaminants and spray mists, and promote leveling of the coating.

NACORR® 1153 is a liquid corrosion inhibitor based on the barium salt of an aromatic sulfonic acid. It is supplied in a HAPS free solvent and is effective in waterborne and solventborne systems.

DISPARLON® 1958 is based on a silicone-free, special nonionic, high molecular weight surface active agent. The product, having strong foam-breaking properties, acts as both a defoaming/leveling agent in low polarity solvent-based coatings. It is particularly effective as a defoamer in alkyd ambient-cure systems such as architectural paints.

NACURE® XC-194K is a latent blocked catalyst based on an alkylaromatic sulfonic acid. It is designed to offer improved stability in amino crosslinked primers that employ basic or ion exchange type anti-corrosive pigments.

NACURE® 2501 is an amine blocked Toluenesulfonic acid (TSA) catalyst that has been formulated for higher electrical resistivity. Compared to NACURE® 2500, NACURE® 2501 will have improved ketone solubility, and lower conductance and higher electrical resistance.

NACORR® 1754 is a liquid corrosion inhibitor based on an amine salt of an aromatic sulfonic acid. It has excellent compatibility in water-based systems, emulsions and dispersion.

NACORR® XR-418 is a liquid corrosion inhibitor based on the salt of an aromatic sulfonic acid/carboxylate derivative and is specifically designed for aluminum and zinc alloys.

DISPARLON® 6650 is a powder polyamide which, through heat activation, develops a strong thixotropic network, providing excellent anti-sag properties and improved recoatability to coatings while being cost effective.

NACURE® 5076 is a strong acid catalyst based on Dodecylbenzenesulfonic acid (DDBSA) supplied at 70% active in Isopropanol.

DISPARLON® NS-5500 is a post addable hybrid thixotropic agent based on a combination of unique technologies supplied as a free flowing paste. DISPARLON® NS-5500 enables uniform coverage with good gloss, pigment orientation, improved flip/flop, anti-settling and anti-sag properties while keeping viscosity low. This product is especially effective for use in automotive systems with aluminum and wood stains with matting or iron oxide pigments. It is post-addable with low shear.

NACURE® XC-235 is an acid phosphate catalyst supplied at 75% active in n-butanol. It is recommended for use with high imino or partially alkylated type melamine crosslinkers.

NACURE® 115 is a strong hydrophobic sulfonic acid catalyst designed for use in bake d amino crosslinked systems. This high active catalyst is designed to help improve direct-to-metal intercoat adhesion properties while maintaining excellent exterior durability.

DISPARLON® 6500 is a unique non-reactive polyamide thixotrope supplied as a powder. Through heat activation a strong thixotropic network provides strong anti-sagging and Anti-slumping without seeding or loss of effectiveness on aging. It is effective in caotings, sealants and adhesives formulations.

NACORR® 1151 is a liquid corrosion inhibitor based on the barium salt of an aromatic sulfonic acid. It has excellent performance in waterborne and solventborne systems and is highly recommended for low pH applications.

DISPARLON® LAP-30 is an acrylic polymer based anti-popping/defoaming agent developed specifically for highly-polar coatings like high-solid baking systems.

DISPARLON® 6700 is a powder polyamide which, through heat activation, develops a strong thixotropic network, providing excellent anti-sag properties particularly for high build epoxies.

NACURE® 2107 is an amine neutralized para-Toluenesulfonic (p-TSA) catalyst designed for fast cure response. It improves metal scratch resistance of acid catalyzed formulations.