Products

K-FLEX® UD-320 is a high solids, aliphatic, low molecular weight urethane diol oligomer. It is soluble in polar organic solvents and has broad compatibility with acrylic, polyester, and alkyd resins. K-FLEX® UD-320 will increase the hardness of a melamine crosslinked system. When used to modify a 2-component polyurethane, it will increase hardness and flexibility. K-FLEX® UD-320 responds best to a zirconium chelate catalyst when used in isocyanate crosslinked systems.

K-FLEX® UD-320-100 a 100% solids version of K-FLEX® UD-320 recommended for prepolymer synthesis and 100% solids WB/SB melamine crosslinked systems or 2K PU. Used for preparation of polyester polyurethanes or alkyd polyurethanes. It provides hardness and exterior durability.

K-FLEX® A307 is a low viscosity, 100% solids linear, saturated, aliphatic polyester diol. This product is designed as a flexibility modifier for acrylic/isocyanate and acrylic/melamine systems.

K-FLEX® A308 is a low-viscosity polyester diol designed as a flexibility modifier for acrylic/isocyanate and acrylic/melamine systems. K-FLEX® A308 provides good hardness and adhesion while allowing lower VOC levels.

K-FLEX® 148 is a lower viscosity version of K-FLEX® 188 designed for formulating higher solids content with good hardness and increased flexibility.

DISPARLON® UVX-188 is an excellent defoaming additive based on special vinyl polymers. Specially designed for defoaming of epoxy UV coatings imparting excellent air-release at any stage from coating manufacturing to film forming.

DISPARLON® AQ-610 is a polyamide based rheology control agent for waterborne systems. A 3-D network structure prevents sagging and pigment settling. Recommended for emulsions and dispersions.

DEOGRIP® WPF is a soft feel additive and anti-slip agent for coating systems.

DISPARLON® OX-70 is a silicone-free, acrylic surface control additive that provided strong defoaming and leveling properties Particularly effective in high-viscosity paints which require a strong defoaming agent, such as epoxies, floor coatings and multi-component systems.

DISPARLON® 6650 is a powder polyamide which, through heat activation, develops a strong thixotropic network, providing excellent anti-sag properties and improved recoatability to coatings while being cost effective.

K-SPERSE® 152 is a highly effective wetting and dispersing agent for all types of pigments. It is a zinc salt of an alkyl aryl sulfonic acid dissolved in an oxygenated solvent and is recommended for use in all solventborne coatings and inks.

DISPARLON® 6250 is a cost effective powdered thixotropic agent based on amide wax. Low activation temperature required to build a strong thixotropic network which prevents slumping of sealants and adhesives. Especially suited for MS sealant and silicone systems.

K-FLEX® XM-332 is an ultra low-viscosity polyester polyol modifier resin designed to provide improved flexibility in solvent-based, high solids and solventless systems. Compared to other K-FLEX® polyester diols, XM-332 produces the softest films. K-FLEX® XM-332 is recommended for use in air dry/force dry 2-component polyurethanes and blocked isocyanate systems.

DISPARLON® UVX-189 is an excellent defoaming additive based on special vinyl polymers. It is specially designed for defoaming of epoxy and acrylic UV coatings imparting excellent air-release at any stage from coating manufacturing to film forming.

NACURE® 1419 is a covalently blocked Dinonylnaphthalenesulfonic acid (DNNSA) catalyst. The polymeric moiety remains in the system and is capable of reacting with the crosslinking agent.

DISPARLON® L-1984N is a silicone-free, acrylic polymer surface control agent for leveling properties in medium polarity systems. Recommended for acrylic coatings including high solids melamine and 2K urethanes. L-1984N has lower surface tension than L-1980N and can be used where greater wetting is required.

DISPARLON® NSH-8430HF is a surface control additive based on specially prepared acrylic/silicone copolymers designed for baking paints such as acrylic/melamine, alkyd/melamine, polyester/melamine and acid/epoxy paint for automotive and appliance applications. This product strongly prevents cratering caused by dirt/stain contamination, and gives excellent wetting over low surface tension coatings such as some of the new high-polarity automotive OEM coatings.

NACURE® 1953 is an amine blocked DNNSA catalyst designed for application in higher bake amino crosslinked systems such as coil coatings and metal decorating.

DISPARLON® AQ-870 is a polyamide based rheology control agent for waterborne systems. A 3-D network structure is formed to prevent sagging and pigment settling. AQ-870 can be easily added into systems with a dissolver.

DISPARLON® 4200-20 is an oxidized polyolefin based thixotropic agent designed to prevent pigment settling and hard caking, with little effect on viscosity. It works synergistically with other rheological additives.

NACURE® 5414 is a polymeric blocked sulfonic acid ester catalyst recommended for use with amino crosslinking resins.

DISPARLON® P-465 is a strong silicone-free defoamer based on vinyl polymers specifically developed for use in roller and squeegee applied floor coatings.

NACURE® 5076 is a strong acid catalyst based on Dodecylbenzenesulfonic acid (DDBSA) supplied at 70% active in Isopropanol.

NACURE® 3525 is an amine neutralized Dinonylnaphthalenedisulfonic acid (DNNDSA) catalyst that utilizes a slower releasing amine for higher bake temperatures. NACURE® 3525 is formulated for increased solubility, especially in high solids polyester and alkyd formulations.

DISPARLON® NS-30 is a patented blend of polyolefin with amide in xylene in paste form. This product effectively prevents sagging and settling of solvent-based coatings including those containing anti-corrosive pigments at high concentrations. NS-30 has little effect on viscosity, while still imparting strong anti-sagging/anti-settling properties.

DISPARLON® DA-325 is a solvent-free wetting and dispersing agent based on an amine salt of polyether phosphate, designed for dispersing pigments in Solvent-free coating systems. Effective with filler, organic, and inorganic pigments.

NACORR® 1151 is a liquid corrosion inhibitor based on the barium salt of an aromatic sulfonic acid. It has excellent performance in waterborne and solventborne systems and is highly recommended for low pH applications.

K-KAT® 4205 is a zirconium chelate catalyst that provides extended pot life and selectivity to NCO/OH reactions for reduced gassing in 2K PU systems. It is efficient for ambient and low temperature cure coatings.

NACURE® SC-52 is an amine neutralized aromatic sulfonic acid, high activity catalyst. It provides excellent balance of cure response and package stability.

DEOGRIP® MICRO A 2020 is matting, soft feel and texturing additive for water-based paints and varnishes.

DISPARLON® AQ-330 is a solvent-free wetting and dispersing agent based on a polymer containing phosphoric acid ester groups, designed for use with metallic and pearlescent pigments in waterborne coating systems without co-solvents.

NACURE® XC-300 is a covalently blocked catalyst based on an alkylaromatic sulfonic acid. It is designed to offer improved stability in amino crosslinked primers that employ basic or ion exchange type anti-corrosive pigments.

K-KAT® XK-635 is a Zinc based catalyst offering an excellent balance of cure and performance improvements. K-KAT® XK-635 is effective for ambient and force dry cure of 2K PU and has excellent performance with MEKO-blocked Isocyanates.

NACURE® XC-235 is an acid phosphate catalyst supplied at 75% active in n-butanol. It is recommended for use with high imino or partially alkylated type melamine crosslinkers.

K-KAT® 682LV is a unique bismuth-amine complex with an excellent balance of high efficiency and hydrolytic stability due to metal-amine synergy. It exhibits great compatibility with HFO-blown PU foam and is efficient in low temperature cure PU systems.

DISPARLON® 4200-10 is a flowable paste of polyolefin wax in xylene consisting of fine particles of 5 μ or less. This thixotropic agent can be post added to prevent pigment settling and hard-caking during storage or during coating application with little effect on viscosity.