Knowde Enhanced TDS
Identification & Functionality
- Polymer Name
- Technologies
Features & Benefits
- Materials Features
Applications & Uses
- Markets
- Plastics & Elastomers End Uses
Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Density | 1 | g/cm3 | ISO 1183 |
Hardness (3 seconds) | 70 | Shore A | ISO 868 |
Melt Flow Index - MFI at 190°C, 5 kg | 15 | g/10 min | ISO 1133 |
Melt Flow Index (190°C, 5 kg) | 15 | g/10 min | ISO 1133 |
Tensile Strength (500 mm/min, at Break) | 10 | MPa | ISO 37 |
Tensile Strength (500 mm/min, 100% strain) | 2 | MPa | ISO 37 |
Tensile Strength (500 mm/min, 300% strain) | 4 | MPa | ISO 37 |
Strain at Break (500 mm/min) | 750 | % | ISO 37 |
Tear Strength | 31 | kN/m | ISO 34 |
Abrasion Resistance | - | mm3 | EN 12770 |
Drying (in case of moisture condensation) | 4 hours at 80°C in ventilated dryer | — | — |
Drying (in case of moisture condensation, 90°C in ventilated dryer) | 4 | hours | — |
Melt Temperature (do not use above 235°C) | 185 - 200 | °C | — |
Mould Temperature | 25 - 40 | °C | — |