Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Key Performance Properties
-
Optical
-
Weatherability
-
Mechanical
-
Thermal
-
Electrical
-
Properties
- Physical Form
- Physical Properties
- Mechanical Properties
- Thermal Properties
- Electrical Properties
- Optical Properties
- Weatherability
Value | Units | Test Method / Conditions | |
Specific Gravity | 1.2 | - | ASTM D-792 |
Area Factor | 160.0 | ft2 / lb / mil | ASTM D-590 |
Water Absorption (Equilibrium) | 0.35 | % | ASTM D-570 |
Rockwell Hardness | 118.0 | R Scale | ASTM D-785 |
Value | Units | Test Method / Conditions | |
Tensile Strength, Break | 9000.0 | psi | ASTM D-638 |
Tensile Strength, Yield | 8500.0 | psi | ASTM D-638 |
Tensile Elongation, Break | 120 - 150 | % | ASTM D-638 |
Tensile Modulus of Elasticity | 350000.0 | psi | ASTM D-638 |
Tear Strength, Initial | 1.4 - 1.8 | lb / mil | ASTM D-1004 |
Tear Strength, Propagation | 30 - 55 | g / mil | ASTM D-1922 |
Impact Strength, Gardner3 | 120.0 | in lbs | ASTM D-5420 |
Value | Units | Test Method / Conditions | |
Deflection Temperature under Flexural Load (264 psi) | 278.0 | °F | ASTM D-648 |
Coefficient of Thermal Expansion | 38 x 10-6 | in / in / °F | ASTM D-696 |
Brittleness Temperature | -211.0 | °F | ASTM D-746 |
Vicat Softening Temperature | 305.0 | °F | ASTM D-1525 |
Value | Units | Test Method / Conditions | |
Dielectric Strength (72°F in oil, short time2) | 1700.0 | V / mil | ASTM D-149 |
Dielectric Constant (60 Hz /1 MHz) | 3.00 / 3.00 | - | ASTM D-150 |
Dielectric Factor (60 Hz/1 Mhz) | 0.10 / 1.11 | - | ASTM D-150 |
Volume Resistivity | 10¹⁷ | Ω-cm | ASTM D-257 |
Surface Resistivity | 10¹⁵ | Ω-cm2 | ASTM D-257 |
Value | Units | Test Method / Conditions | |
Refractive Index (77° F) (25°C) | 1.587 | ND | ASTM D-542 |
Light Transmission | 89.0 | % | ASTM D-1003 |
Haze | max. 1.0 | % | ASTM D-1003 |
Yellowness Index | max. 1.0 | - | ASTM D-1925 |
Value | Units | Test Method / Conditions | |
Yellowness Index, control | max. 1.0 | - | ASTM D-2565 |
Yellowness Index, PC9 after 1000 hours Xenon Arc | max. 1.5 | - | ASTM D-2565 |
Yellowness Index, PC9 after 2000 hours Xenon Arc | max. 3.0 | - | ASTM D-2565 |
Yellowness Index, non-UV enhanced after 1000 hours Xenon Arc | max. 13.0 | - | ASTM D-2565 |
Yellowness Index, non-UV enhanced after 2000 hours Xenon Arc | max. 18.0 | - | ASTM D-2565 |
Technical Details & Test Data
- Technical Data
Thickness Range 0.002” – 0.030” Surface Textures Gloss/Gloss*
Velvet/Matte
Velvet/Gloss
Matte/GlossMaster Roll Lengths up to 2,000 yards (dependent on thickness)
Custom roll lengths availableWidths 48.5” – 63”
Custom slit widths availableSheets 24.5” x 48.5” sheets
48.5” x 96.5” sheets
Custom trimmed and squared sheets available* Standard protective masking configuration (0.005” - 0.007” is cling/cling and 0.010” - 0.030” is stick/cling).