Knowde Enhanced TDS
Identification & Functionality
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Product Characteristics
Ver high surface hardness, good UV-stability and heat resistance, very good resistance to chemicals, especially foodstuffs and their additives
Primary application: Pot and pan handles
Cellulose reinforced Melamine molding compound
This product meets the allowed upper limits for heavy metals and PCAs and also conforms to the requirements of the EU directives RoHS 2, 2002/96 (WEEE) and 2006/122 (PFOS)
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Supply form
Low dust granulate
- Processing
- SYNRES-ALMOCO
Properties
- Flame Rating
- Mechanical Properties
- Thermal Properties
- Typical Properties
- Electrical Properties
| Value | Units | Test Method / Conditions | |
| Compressive strength | 200 - 250 | MPa | ISO 604 |
| E-Modulus (flexural test) | 7 - 9 | GPa | ISO 178 |
| E-Modulus (tensile test) | 5 - 8 | GPa | ISO 527 |
| Flexural strength | 110 - 130 | MPa | ISO 178 |
| Impact strength (Charpy) | 8 - 14 | kJ/m² | ISO 179 / 1eU |
| Impact strength (Charpy), notched | 1,8 -2,2 | kJ/m² | ISO 179 / 1eA |
| Tensile strength | 50 - 90 | MPa | ISO 527 |
| Value | Units | Test Method / Conditions | |
| Coeff. of linear thermal expansion (longitudinal,50-100°C) | 15 - 35 | 10-6 / K | ISO 11359-2 |
| Flammability | V-0 / 1,5 | Stufe/mm | UL 94 |
| Glow wire flammability test / GWFI | 960 / 1 | — | IEC60695-2-12 |
| Glow wire ignitability test / GWIT | 900 / 1 | — | IEC60695 2-13 |
| Heat deflection temp. HDT A - 1,80 MPa | 160 - 180 | °C | ISO 75 |
| Heat deflection temp. HDT C - 8,00 MPa | 120 - 140 | °C | ISO 75 |
| Maximum application temperature (<50 h) | 170 | °C | IEC 60216/T1 |
| Maximum application temperature (20 000 h) | 140 | °C | IEC 60216/T1 |
| Thermal conductivity | 0,4 - 0,5 | W / m * K | ASTM E 1461 |
| Value | Units | Test Method / Conditions | |
| Moulding shrinkage (longitudinal) | 0,8 - 1,2 | % | ISO 2577 |
| Post shrinkage (168 h / 110 °C) | 1,0 - 1,5 | % | ISO 2577 |
| Specific gravity | 1.70 - 1.80 | g/cm³ | ISO 1183 |
| Water absorption (24 h / 23 °C) | max. 115 / max. 2,0 | mg / % | ISO 62 |
| Apparent Density | 0.60 - 0.80 | g/cm³ | ISO 60 |
| Value | Units | Test Method / Conditions | |
| Surface Resistance | 10^10 - 10^11 | Ohms | IEC 60093 |
| Tracking resistance (CTI) | 600 | V | IEC 60112 |
| Volume resistivity | 10^11 - 10^12 | Ω cm | IEC 60093 |
| Arc resistance | 5 | Stufe | ASTM D 495 |
| Dielectric strength | 15-20 | kV / mm | IEC 60243-1 |
| Dissipation factor (100 Hz/1 MHz) | 0,3-0,5 / 0,03-0,05 | — | IEC 60250 |
| Relative permittivity (100 Hz/1 MHz) | 11 - 16 / 7 - 9 | — | IEC 60250 |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Packaging Type
Storage & Handling
- Storage conditions / shelf life
Keep cool and dry.Minimum shelf life at 20 ± 5 °C:6 months after date of delivery