company tower banner
Saati Americas Corp. Company Logo

Ultrafix SB9 plus

1 of 8 products in this brand
Saati Chemicals Ultrafix SB9 plus is a 2-part frame adhesive.

Product Type: 2K (2 component) Adhesive, Contact Adhesive

Application Area: Textiles

Compatible Substrates & Surfaces: Aluminum, Iron, Metal, Steel, Wood

Application Method: Brush

Chemical Family: Polyurethanes (PU)

Technical Data Sheet
  • TypeDocument Name
View All Documents

Knowde Enhanced TDS

Identification & Functionality

Chemical Family

Features & Benefits

Characteristics
  • Two-components polyurethane adhesive
  • Low percentage of acetone
  • Red color ,medium viscosity, for coarse and medium mesh counts
  • Very good initial adhesion allows to glue screen mesh on aluminum pre-treated surface ,iron, steel ,plastic coated and wood frames
  • Drying time, between approx15-30 minutes ,depend on mesh count end environmental local temperature condition
  • Ultrafix SB9 Plus is low viscosity adhesive for medium to fine mesh-count fabrics.

Applications & Uses

Application Area
Application Method
Compatible Substrates & Surfaces
Directions For Use

Mix 100 parts of Ultrafix SB9 Plus with 20 part of Catalyst by weight. The mixture prepared is ready to use and suitable to paste fabrics from 32 threads /cm without addition thinner. Use within 60 to 90 minutes.

To obtain optimal adhesion, degrease the frame. Stretch the fabric over the frame providing good contact between the two. Apply the prepared mixture with a brush. After the adhesive has dried and cured ( drying time depend of mesh count fabrics and environmental local temperature condition)release tension and remove the screen from the stretching system.

Packaging & Availability

Packaging

ULTRAFIX SB9 Plus is available in 0,75, 4,5 kilogram containers. CATALYST ULTRAFIX SB9 Plus is available in 0,15 and 0,9 kilogram containers.

Storage & Handling

Storage

When sealed in the original container and stored in cool conditions, ULTRAFIX SB9 Plus will maintain original properties for 24 months from the date of production.

WARNING : In winter time packages of adhesive exposed to low temperatures (close to 0°C) could increase quite a lot adhesive viscosity. In case, keep containers in a warm place or, to short the process, place them in a hot air oven (40-45°C) for several hours. Operating in this way is possible to recover original conditions of the adhesive without deteriorations.