LNP LUBRILOY™ Compound - RF203AXH - SABIC's Specialty

Identification & Functionality

Additives Included: Heat Stabilizer,
Lubricant (Unspecified),
Mold Release Agent,
Proprietary
Chemical Family: Polyamides
Fillers Included: Glass Fiber
Polymer Name: Polyamide 66 (PA 66)
Plastics & Elastomers Functions: Resin
Technologies: Plastics
Product Families: Plastics — Engineering & Specialty Polymers
Polyamides

Features & Benefits

Materials Features: Friction Resistant,
Good Mold Release,
Heat Stabilized,
Lubricated,
Non-Halogenated,
Wear Resistant

Applications & Uses

Markets: Healthcare & Pharma,
Printing & Packaging
Applications: Healthcare & Pharma — Medical
Medical Devices & Assemblies,
Surgical Instruments & Trays
Printing & Packaging — Packaging
Healthcare Packaging,
Industrial & Transport Packaging
Plastics & Elastomers End Uses: Medical Devices,
Medical Packaging,
Medical/Healthcare Applications,
Pharmaceutical Packaging,
Surgical Devices
Plastics & Elastomers Processing Methods: Injection Molding

Properties

Mechanical Properties
Physical Properties
Thermal Properties
Impact Properties
Injection Molding
Note: ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.

⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.

¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.

	Value	Units	Test Method / Conditions
Tensile Stress (Break, 5 mm/min) ¹¹	91	MPa	ISO 527
Tensile Strain (Break, 5 mm/min) ¹¹	3.3	%	ISO 527
Flexural Stress ¹¹	133	MPa	ISO 178
Flexural Modulus (at 2 mm/min) ¹¹	4120	MPa	ISO 178
Tensile Stress (Break, Type I, 5 mm/min) ¹¹	93	MPa	ASTM D638
Tensile Strain (Break, Type I, 5 mm/min) ¹¹	3.4	%	ASTM D638
Tensile Modulus (at 5 mm/min) ¹¹	5040	MPa	ASTM D638
Flexural Stress (Yield, 1.3 mm/min, 50 mm span) ¹¹	136	MPa	ASTM D790
Flexural Stress (Break, 1.3 mm/min, 50 mm span) ¹¹	131	MPa	ASTM D790
Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹¹	4290	MPa	ASTM D790

	Value	Units	Test Method / Conditions
Moisture Absorption (at 23°C, 50% RH) ¹¹	0.6	%	ISO 62
Specific Gravity ¹¹	1.12	—	ASTM D792
Density ¹¹	1.11	g/cm³	ASTM D792
Moisture Absorption (at 23°C, 50% RH, 24hrs) ¹¹	0.4	%	ASTM D570
Mold Shrinkage (flow, 24 hrs) ᵍ ¹¹	0.8 - 1	%	ASTM D955
Mold Shrinkage (xflow, 24 hrs) ᵍ ¹¹	1 - 3	%	ASTM D955
Wear Factor Washer ¹¹	44	10^-10 in^5-min/ft-lb-hr	ASTM D3702 Modified: Manual
Wear Factor Ring ¹¹	3	10^-10 in^5-min/ft-lb-hr	ASTM D3702 Modified: Manual
Dynamic COF ¹¹	0.37	—	ASTM D3702 Modified: Manual
Static COF ¹¹	0.4	—	ASTM D3702 Modified: Manual

	Value	Units	Test Method / Conditions
Heat Deflection Temperature/Bf (at 0.45 Mpa, Flatw 80104, sp=64mm) ¹¹	244	°C	ISO 75/Bf
Heat Deflection Temperature/Af (at 1.8 Mpa, Flatw 80104, sp=64mm) ¹¹	201	°C	ISO 75/Af
Heat Deflection Temperature (at 0.45 MPa, 3.2 mm, Unannealed) ¹¹	252	°C	ASTM D648
Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹	238	°C	ASTM D648
Coefficient of Thermal Expansion (at -30°C to 30°C, flow) ¹¹	0.000056	1/°C	ASTM D696
Coefficient of Thermal Expansion (at -30°C to 30°C, xflow) ¹¹	0.000001	1/°C	ASTM D696

	Value	Units	Test Method / Conditions
Izod Impact (Notched, 80104, at 23°C) ¹¹	10	kJ/m²	ISO 180/1A
Izod Impact (Unnotched, 80104, at 23°C) ¹¹	46	kJ/m²	ISO 180/1U
Multi-Axial Impact ¹¹	2	J	ISO 6603
Izod Impact (Notched, at 23°C) ¹¹	98	J/m	ASTM D256
Izod Impact (Unnotched, at 23°C) ¹¹	731	J/m	ASTM D4812
Instrumented Dart Impact Total Energy (at 23°C) ¹¹	11	J	ASTM D3763

Packaging & Availability

LNP™ LUBRILOY™ Compound RF203AXH