Knowde Enhanced TDS
Identification & Functionality
- FRAC Code
- Agrochemical Functions
- Technologies
- Product Families
- Active Ingredients
Thiophanate-Methyl (Dimethyl [(1,2-phenylene)bis (iminocarbonothioyl)]bis[Carbamate])* 46% OTHER INGREDIENTS: 54% TOTAL: 100.00% *Also known as Dimethyl 4,4’-o-phenylebis-[3-thioallophanate] Contains 45 Lbs Thiophanate Methyl per gallon
Features & Benefits
- Agrochemicals Features
- Highlights
ArmorTech TM 462 F is formulated as a flowable liquid. Apply ArmorTech TM 462 F by ground equipment using sufficient volume
of spray to provide thorough coverage. Ensure the tank and spray equipment has been cleaned of all other pesticides prior to
mixing this product. Continuous agitation is required to keep the ingredients in suspension.
DO NOT tank mix with highly alkaline pesticides, including Bordeaux mixture or lime sulfur. DO NOT tank mix with coppercontaining
materials or with highly alkaline pesticides, including Bordeaux mixture or lime sulfur.
No claim of compatibility with other pesticides is implied. Most effective disease control is obtained by preventative spray
timing as climatic conditions indicate fungal infection or growth is imminent. Always use the higher rates under conditions of
severe disease pressure. Also, see local State Extension Service directions for application schedules.
Mode of Action: ArmorTech TM 462 F is a tubulin inhibitor fungicide falling into the FRAC Group 1 for Benzimidazoles.
Its Mode of Action is the inhibition of microtubule assembly. It has protectant, systemic and curative actions, each of these
specific to certain crops, fungi and climatic conditions.
Applications & Uses
- Markets
- Applications
- Applicable Crop
- Application Technique
- Fungicide Target Species
- User Safety Recommendations
Users should:
• Remove clothing/PPE immediately if pesticide gets inside. Then wash thoroughly and put on clean clothing.
• Remove PPE immediately after handling this product. Wash the outside of gloves before removing, As soon as possible,
wash thoroughly and change into clean clothing.- Direction Of Use
IT IS A VIOLATION OF FEDERAL LAW TO USE THIS PRODUCT IN A MANNER INCONSISTENT WITH ITS
LABELING.
Shake well before using.
DO NOT apply this product in a way that will contact workers or other persons, either directly or through drift. Only protected
handlers may be in the area during application. For any requirements specific to your State or Tribe, consult the agency
responsible for pesticide regulation.
AGRICULTURAL USE REQUIREMENTS
Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR part 170. This
Standard contains requirements for the protection of agricultural workers on farms, forests, nurseries, and greenhouses,
and handlers of agricultural pesticides. It contains requirements for training, decontamination, notification, and emergency
assistance. It also contains specific instructions and exceptions pertaining to the statements on this label about personal
protective equipment (PPE) and restricted-entry interval. The requirements in this box only apply to uses of this product
that are covered by the Worker Protection Standard.
DO NOT enter or allow worker entry into treated areas during the restricted entry interval (REI) of 12 hours.
Exemption: If the product is applied by drenching, the Worker Protection Standard, under certain circumstances, allows
workers to enter the treated area if there will be no contact with anything that has been treated.
PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and that involves
contact with anything that has been treated, including plants, soil or water, is
• Coveralls over long sleeved shirt and long pants
• Chemical-resistant gloves made of any waterproof material
• Chemical-resistant footwear plus socks
• Chemical-resistant headgear for overhead exposures
NON–AGRICULTURAL USE REQUIREMENTS
The requirements in this box apply to uses of this product that are NOT within the scope of the Worker Protection Standard
for agricultural pesticides (40 CFR Part 170). The WPS applies when this product is used to produce agricultural plants on
farms, forests nurseries, or greenhouses.
DO NOT enter or allow others to enter treated area until sprays have dried. Keep children and pets out of the treated
area until sprays have dried.
Properties
- Physical Form
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Precautionary Statements
HAZARDS TO HUMANS AND DOMESTIC ANIMALS
CAUTION
Harmful if inhaled or absorbed through skin. Causes moderate eye irritation. Avoid contact with skin, eyes or clothing. Harmful
if swallowed. Avoid breathing vapor or spray mist. Wash hands before eating, drinking, chewing gum, using tobacco or using
the toilet.
PERSONAL PROTECTIVE EQUIPMENT (PPE):
Some materials that are chemical-resistant to this product are Barrier Laminate Gloves, Nitrile Rubber Gloves ≥ 14 mils, or
Viton Gloves ≥ 14 mils.
Handlers mixing, loading and applying the product as a dip must wear:
• Coveralls over long-sleeved shirt and long pants
• Chemical–resistant gloves
• Chemical-resistant footwear plus socks
• Chemical resistant apron
All other mixers, loaders and applicators must wear:
• Long-sleeved shirt and long pants
• Shoes plus socks
• Chemical-resistant gloves for all mixers and loaders and for application using hand held equipment
• Chemical-resistant apron for mixers, loaders, and other handlers exposed to concentrate- Environmental Hazards
DO NOT apply directly to water, or to areas where surface water is present or to intertidal areas below the mean high water mark. Runoff from treated areas may be hazardous to aquatic organisms in neighboring areas. DO NOT contaminate water when disposing of equipment washwater or rinsate.
Packaging & Availability
- Packaging Type
Storage & Handling
- Storage And Disposal
DO NOT contaminate water, food, or feed by storage or disposal.
PESTICIDE STORAGE: Store this product in a cool, dry place in its original container only. DO NOT store this product near
fertilizers, seeds, or other pesticides.
PESTICIDE DISPOSAL: Pesticide wastes are toxic. Improper disposal of excess pesticide, spray mixture, or rinsate is
a violation of Federal Law. If these wastes cannot be used according to label instructions, contact your State Pesticide or
Environmental Control Agency, or the Hazardous Waste representative at the nearest EPA Regional Office for guidance.
CONTAINER HANDLING:
Nonrefillable container. DO NOT reuse or refill this container. Triple rinse container (or equivalent) promptly after emptying.
(Nonrefillable container ≤ 5 gallons): Triple rinse as follows: Empty the remaining contents into application equipment or a
mix tank and drain for 10 seconds after the flow begins to drip. Fill the container 1/4 full with water and recap. Shake for 10
seconds. Pour rinsate into application equipment or a mix tank or store rinsate for later use or disposal. Drain for 10 seconds
after the flow begins to drip. Repeat this procedure two more times. Then offer for recycling if available or puncture and
dispose of in a sanitary landfill, or by incineration.