Products

Wayncor™ 240 - Corrosion Inhibitor Pigment is a white Basic Zinc Molybdate anti-corrosive pigment which imparts good corrosion resistance to protective primers. It has a wide variety use in thermo set and thermo plastic systems. It can be used alone or in conjunction with other anti-corrosive additives. The typical use level for this product is between 3 – 7% based on total formula weight. It has a small particle size and narrow distribution which will permit it to be used in wash primers, DTM, or primer applications.

Wayncor™ 222 - Corrosion Inhibitive Pigment is a white, non-refractive, anti-corrosive pigment used in protective coatings. It is widely considered by the coatings industry to be a standard corrosion inhibitor. It exhibits a high degree of versatility and is compatible with almost all commercially available aqueous and solvent based coatings. The use level will vary depending upon resin system, pigment volume concentration and desired performance parameters, however typical use levels are between 3 – 10% total formula weight.

Corrosperse™ 176M is a 70% dispersion of Strontium Chromate in Methyl Amyl Ketone, It has a Fineness of Grind (7 Hegman) which means no grinding is required and it can easily be incorporated using high speed mixing techniques. Because the product is a pourable liquid, there are none of the concerns associated with Hexavalent Chrome in pigment form, specifically exposure to dust.

Wayncor™ 211 is an anti-corrosion inhibitive pigment that is very effective in solvent and water based epoxy primers. It does not affect the pot life of 2K systems. It can also be used alone or as a synergist with Zinc Phosphate. Typical use level is between 3 – 7 % total formula weight.

Corrosperse™ 177 MA is a 75% dispersion of Strontium Chromate in MAK and Acetone. It has a Fineness of Grind (7 Hegman) which means no grinding is required and it can easily be incorporated using high speed mixing techniques. Because the product is a pourable liquid, there are none of the concerns associated with Hexavalent Chrome in pigment form, specifically exposure to dust.

Corrosperse™ 176A-100 70% is a 70% dispersion of Strontium Chromate in Aromatic 100. It has a Fineness of Grind (7 Hegman) which means no grinding is required and it can easily be incorporated using high speed mixing techniques. Because the product is a pourable liquid, there are none of the concerns associated with Hexavalent Chrome in pigment form, specifically respirable dust exposure.

Wayncor™ 205 - Corrosion Inhibitive Pigment is an anti corrosion pigment that utilizes a calcium ion exchange mechanism to inhibit the corrosion process. Its near neutral pH allows it to be used in a wide variety of formulas without a negative impact on paint stability. The fine Hegman grind (6.5 minimum) permits its use in thin film applications (4 – 10 microns) such as coil coatings and in more traditional industrial applications where the dry film thickness is higher. This fine Hegman value also allows the product to be high speed dispersed. The Wayncor™ 205 mechanism works well on both ferrous and non-ferrous substrates. Wayncor™ 205 can be used as the sole corrosion inhibitor or synergistically with other inhibitive technologies.

Hybricor™ 204 - Hybrid Corrosion Inhibitor Pigment is an organic/inorganic hybrid corrosion inhibitor pigment, a proven effective replacement for Cr6+ in aerospace primer applications on aluminum and other non-ferrous substrates. The fine particle size of Hybricor™ 204 (7 Hegman) permits it to be easily incorporated into a coating using a high speed disperser. It is effective in primers, DTM and thin film (< 20 micron) applications. It does not affect pot life of 2K systems. Use level varies by intended application requirements.

Corrosperse™ !76E is a 65% dispersion of Strontium Chromate in Glycol Ether EB. It has a Fineness of Grind (7 Hegman) which means no grinding is required and it can easily be incorporated using high speed mixing techniques. Because the product is a pourable liquid, there are none of the concerns associated with Hexavalent Chrome in pigment form, specifically exposure to dust.

Stainban™ 208 - Calcium Strontium Zinc Phosphosilicate is a white, non-refractive pigment especially designed to inhibit the migration of the tannin stains in coatings on a wide variety of woods. The small particle size and narrow particle distribution allows the pigment to be easily incorporated into the coating using high speed dispersion. It is compatible with a wide variety of solvent and water based resins. It is recommended for use in primers or in self-priming applications where stain inhibition is needed. Typical use levels range from 5 – 9% total formula weight.