Products in Other Adhesives & Sealants Applications: Epoxy Coating

Defoamer for water-based coating systems, VOC- and silicone free. SCHWEGO foam 8325 can be used in emulsion paints, water-based coatings, silicate paints, adhesives and plasters.

Finomide 1140 is a reactive polyamides which are utilized primarily as curing agents for epoxy resins used in surface coatings ,Adhesives, Decorative Coatings, Laminations, Pottings.

MicroDyne™ 75 is a free flowing powdered material that easily disperses in many substrates (e.g., plastic resins, adhesives, sealants, coatings) and can provide significant cost savings while providing the same or improved performance. Its fine particle size provides a smooth surface appearance on finished products and is a “green” material made from end-of-life tires. A free flowing black powder produced from recycled rubber material as defined by ASTM D 5603-01 Grades 1, 2, 3, and 4.

Shandong Huijin Chemical HJT-31A epoxy resin curing agent is reacted from the phenolic resin modified ethylene diamine, according to customer's different requirements, we add different agent to our product, so that our products will be more suitable for domestic and abroad market.

MicroDyne™ 105 is a free flowing powdered material that easily disperses in many substrates (e.g., plastic resins, adhesives, sealants, coatings) and can provide significant cost savings while providing the same or improved performance. Its fine particle size provides a smooth surface appearance on finished products and is a “green” material made from end-of-life tires. A free flowing black powder produced from recycled rubber material as defined by ASTM D 5603-01 Grades 1, 2, 3, and 4.

Alteo LVSH1 is used in a wide variety of applications and polymer systems which consists of low fines content and a very well defined topcut, viscosity optimized. It is available from from 25 to 4 microns.

Kanamoll is a vegetable oil-based light colored secondary plasticizer. ESBO is manufactured from soybean oil through the process of epoxidation. It is been used widely as plasticizer because of high numbers of epoxidized carbon-carbon double bonds. The epoxide group is more reactive due to double bonds, thus making it a good hydrochloric acid scavenger and plasticizer.

Nigtas 5 has its applications in Water based Interior / Exterior Paints, Primers and Pastes, Long Oil Synthetic Paints, Rapit based Industrial Paints, Short Oil Cellulosic Paints, Marine Paints, Furniture Paints, Epoxy Paints, Printing Inks, Static Powder Coatings.

Kukdo Chemical KD-3013 Epoxy Resins are bisphenol-A type half-capped epoxy resin, and designed for applications of high performance powder coating, especially FBE(Fusion Bonded Epoxy coating). The most advantage of these products is that residual bisphenol-A content is the less than one percent by weight. Also, these products have excellent performance of block resistance, chemical resistance and mechanical properties.

EkaSol™ 1 is a VOC compliant, low toxicity solvent that is an efficient and cost effective replacement for Methyl Ethyl Ketone (MEK).

Shandong Huijin Chemical HJT-31D epoxy resin curing agent is reacted from the phenolic resin modified ethylene diamine, according to customer's different requirements, we add different agent to our product, so that our products will be more suitable for domestic and abroad market.

Kukdo Chemical KD-4014 Epoxy Resins are bisphenol-A type half-capped epoxy resin, and designed for applications of high performance powder coating, especially FBE(Fusion Bonded Epoxy coating). The most advantage of these products is that residual bisphenol-A content is the less than one percent by weight. Also, these products have excellent performance of block resistance, chemical resistance and mechanical properties.

INHIBISPHERES® A is submicron ceramic particles that can provide specific functionalities to classic coating formulations. INHIBISPHERES® A is porous silica particles containing encapsulated corrosion inhibitors. INHIBISPHERES® A is metal-free. INHIBISPHERES® A is added at different levels extend the duration of corrosion protection in the coating.

Alteo SH150 is used in a wide variety of applications and polymer systems which consists of low fines content and a very well defined topcut. It is available from from 25 to 4 microns.

SB-332 ground ATH that provides low cost flame retardance and smoke suppression, and arc-track resistance. The medium-fine particle distribution yields desirable flow properties, good physical properties and suspension characteristics required in SMC/BMC compression molding and many rubber compounds. Applications utilizing SB-332 includes SMC/BMC electrical switch gear, appliance electrical sheet and office equipment housings along with epoxies, polishes, adhesives and coatings. A complete range of surface modifications is available to aid processing and enhance physical properties.These include silanes, stearates and wetting agents. .

INHIBISPHERES® B is submicron ceramic particles that can provide specific functionalities to classic coating formulations. INHIBISPHERES® B is porous silica particles containing encapsulated corrosion inhibitors. INHIBISPHERES® B is metal-free. INHIBISPHERES® B release quickly to prevent corrosion in the scribe (1000 hours).

Alteo SH100 is used in a wide variety of applications and polymer systems which consists of low fines content and a very well defined topcut. It is available from from 25 to 4 microns.

JINGYI BK-883B has a strong thickening ability, good compatibility, need polar activator. Applicable to low, middle and high polar solvent systems especially suit for 200# solvent, coal tar, arene, etc. it is also used in paints, printing inks, sealants, lubricating greases, putty, mixed paints, bitumen paints, chlorinated rubber paints, epoxy paints, anticorrosion paints, container paints, etc. The international countertype of BK-883B is Bentone-52.

ZemaSol™ is a VOC-compliant, safe, low toxicity solvent that is an efficient, cost effective alternative to Xylene, Toluene, Parachlorobenzotrifluoride (PCBTF/Oxsol 100®) and Tertiary Butyl Acetate (TBAc).

Prolink PLR 23 ProLink Pacific Resin is a high performance, durable system with excellent resistance to yellowing caused by UV degradation. This system can be used as a substitute for any standard epoxy system. The system will cure at ambient temperature, but for use in thin films, allow the mixed system to sit until approximately 90°F before being spread thin. Curing at elevated temperatures or allowing long post-cures could also be used to achieve adequate working time.

Amparmor® 1000 is a uniquely engineered microcapsule containing a patented blend of healing agent based on silicone-based resins, co-crosslinking agents/enhancers and adhesion promoters. These microcapsules are designed for coating applications where coating self-healing is needed for extended coating durability. AMPARMOR® 1000 is recommended for use in liquid solvent-based, water-based resins and powder coatings, and is compatible with most coating resin types including epoxy, polyester, polyurethane and acrylic systems.

AKTIFIT PF 111 is a Calcined product based on SILFIT Z 91 coated with alkyl silane.

MicroDyne™ 400 is a free flowing powdered material that easily disperses in many substrates (e.g., plastic resins, adhesives, sealants, coatings) and can provide significant cost savings while providing the same or improved performance. Its fine particle size provides a smooth surface appearance on finished products and is a “green” material made from end-of-life tires. A free flowing black powder produced from recycled rubber material as defined by ASTM D 5603-01 Grades 1, 2, 3, and 4.

Shandong Huijin Chemical 300 polyamide curing agent is vegetable oil and ethylene amine dimer acid synthesis.

WSCM-5110 has monofunctional reactive epoxy diluent, low viscosity, can improve toughness and water resistance, used in high solids or solvent-free systems.

XYSIL® R120B is a fumed silica after treated with DDS(Dimethyldichlorosilane). It is based on a hydrophilic fumed silica with a specific surface area of 150m2/g.

NOFO 1032 is a blend of silicone and organic acid esters. Designed for use in most nonaqueous based coating systems, adhesives and inks. Allows for air release of high build epoxy, urethane, and various casting resins.

AKTISIL PF 777 is a SILLITIN Z 86 coated with alkyle silane.

ExBar® 200 is manufactured from a buff-colored barium sulfate ore. Strict quality control results in consistent products that are used in friction materials, primers, acoustical compounds, rubber compounds, adhesives, sealants and many other applications.

Springfield Industries SP-612A is an epoxy flexibilizer formulation used toadd flexibility and impact resistance to epoxyadhesives and coatings. It is bisphenol A epoxy basedwith a polysulfide flexibilizing component andproduces a transparent coating when used with anappropriate curing agent.

Shandong Huijin Chemical HJT-31B epoxy resin curing agent is reacted from the phenolic resin modified ethylene diamine, according to customer's different requirements, we add different agent to our product, so that our products will be more suitable for domestic and abroad market.

INHIBISPHERES® ZB is submicron ceramic particles that can provide specific functionalities to classic coating formulations. INHIBISPHERES® ZB is porous silica particles containing encapsulated corrosion inhibitors. Low levels of INHIBISPHERES® ZB give superior performance when compared to a traditional corrosion inhibitor on steel.

INHIBISPHERES® ZS is submicron ceramic particles that can provide specific functionalities to classic coating formulations. INHIBISPHERES® ZS is porous silica particles containing encapsulated corrosion inhibitors. INHIBISPHERES® ZS (ISZS) releases quickly to slow corrosion in the scribe (250 hours).

Nigtas 3 has its applications in Water based Interior / Exterior Paints, Primers and Pastes, Long Oil Synthetic Paints, Rapit based Industrial Paints, Short Oil Cellulosic Paints, Marine Paints, Furniture Paints, Epoxy Paints, Printing Inks, Static Powder Coatings.

BRITOL 540 is used as Curing Agent For Epoxy Based Adhesives & Coatings.

JSC SUMYKHIMPROM Titanium Dioxide Sumtitan R-2061 is characterized by increased atmospheric resistance, high optic characteristics. Is recommended to produce masterbatch, thermoplastics, high strength PVC for both interior and exterior applications, to produce elastomers, rubber, paper (incl. paraffin and ornamental paper), paper coatings (incl. wallpaper), food packaging, leather, white cement, sealants, adhesives, organosoluble semi-matt paints for interior and exterior operations, beddings, putties, silicate paints, finishing mortars (incl. cement mortars), polymer coatings, powder coatings, epoxy coatings, rubber.