Products in Automotive: Styrenic Thermoplastic Elastomer

TPE-S, Shore A40, black

TPE-S, Shore A31, translucent, food compliant according to EU 10/2011 and FDA

TPE-S, Shore A45, natural

TPE-S, Shore A60, natural, modified for good adhesion to ABS, PC and ABS / PC blends

TPE-S, Shore A65, black

RESIPRENE® 1090 is a Thermoplastic Elastomer (TPE) easy to process and great for injection molding process

RESIPRENE® 1055 is a Thermoplastic Elastomer (TPE) easy to process □ Easy color match and great for injection molding process

RESIPRENE® 1045 is a Thermoplastic Elastomer (TPE) easy to process □ Easy color match and great for injection molding process

TPE-S, Shore A35, translucent, suitable for food contact

TPE-S, Shore A30, natural

RESIPRENE® 1060 is a Thermoplastic Elastomer (TPE) easy to process and great for injection molding process

TPE-S, Shore A79, natural, modified for good adhesion, etc. On PBT and PBT blends. KEBAFLEX - H / SPBT 70 A.02 natural was developed specially for use outdoors (UV stabilization) and has an optimized demolding behavior.

TPE-S, Shore A80

BARLOG plastics GmbH Kebablend® / M FE 190401 TPE (black) is a development product based on TPE for the production of injection molded magnets. The material has a Shore A 82 hardness.

TPE-S, Shore A63, modified for adhesion to PET, food compliant according to EU 10/2011 and FDA

DynaStar™ 77370-1000 contains applications such as tourniquets, tubing, bumpers, covers, plungers etc.

BARLOG plastics GmbH Kebaflex® / S 95F A.01 Translucent is a TPE-S, Shore A95, translucent, suitable for food contact. It is available in various Shore hardnesses from below A10 to more than D50 and is often used as a substitute for rubber due to the cost-effective processing in the injection molding process. It is soft and flexible, can be colored freely, shows good elastic behavior up to 100°C and is pleasant to the touch. A wide range of modified compounds is available, e.g. adhesion-modified types for 2K injection molding, printable types, variants with optimized compression set, etc.

TPE-S, Shore A63, translucent, food compliant according to EU 10/2011 and FDA

TPE-S, Shore A55, black, modified for good adhesion, etc. On ABS, PC and PC / ABS blends.

TPE-S, Shore A70, translucent

TPE-S, Shore A65, translucent. Abrasion resistant, high dynamic resilience, good DVR and good adhesion to PP in 2K injection molding.

DynaStar™ 77340-9000 contains applications such as tourniquets, tubing, bumpers, covers, plungers etc.

TPE-S, Shore A45, modified for good adhesion, etc. On PBT, PC and PC / ABS blends.

TPE-S, Shore A75, black, modified for good adhesion, etc. ABS and PMMA.

TPE-S, Shore A60, black

BARLOG plastics GmbH Kebaflex® / SG 85 HT A.01 is a TPE-S, Shore A85, with improved compression set at high temperatures. It is available in various Shore hardnesses from below A10 to more than D50 and is often used as a substitute for rubber due to the cost-effective processing in the injection molding process. It is soft and flexible, can be colored freely, shows good elastic behavior up to 100°C and is pleasant to the touch. A wide range of modified compounds is available, e.g. adhesion-modified types for 2K injection molding, printable types, variants with optimized compression set, etc.

TPE-S, Shore A60, black, improved compression set at high temperatures

TPE-S, Shore A46, black

BARLOG plastics GmbH Kebaflex® / SG 85 A.01 is a TPE-S, Shore A85. It is available in various Shore hardnesses from below A10 to more than D50 and is often used as a substitute for rubber due to the cost-effective processing in the injection molding process. It is soft and flexible, can be colored freely, shows good elastic behavior up to 100°C and is pleasant to the touch. A wide range of modified compounds is available, e.g. adhesion-modified types for 2K injection molding, printable types, variants with optimized compression set, etc.

DynaStar™ 77360-1000 contains applications such as tourniquets, tubing, bumpers, covers, plungers etc.

TPE-S, Shore A75, modified for good adhesion to polycarbonate

Resiprene® 1065 is a Thermoplastic Elastomer (TPE) easy to process and great for injection molding process.

TPE-S, Shore A55, modified for good adhesion to adhesion-modified polyamides such as PA6, PA66, PA6.12 or partially aromatic PA types such as e.g. GRIVORY GV or GRIVORY HT (manufacturer EMS-GRIVORY)

BARLOG plastics GmbH Kebaflex® / S 90 A.05 is a TPE-S, Shore A90. It is available in various Shore hardnesses from below A10 to more than D50 and is often used as a substitute for rubber due to the cost-effective processing in the injection molding process. It is soft and flexible, can be colored freely, shows good elastic behavior up to 100°C and is pleasant to the touch. A wide range of modified compounds is available, e.g. adhesion-modified types for 2K injection molding, printable types, variants with optimized compression set, etc.

TPE-S, Shore A50, translucent

TPE-S, Shore A67, natural, modified for good adhesion, etc. On ABS, PC and PC / ABS blends, compliant for food contact according to EU 10/2011.