Brands in Exploration & Upstream

EZ-Blox® is a safe, cost-effective and proven alternative to MEKO. It optimizes the performance of alkyd-based paint and coating systems by preventing a surface skin from forming atop when coming into contact with atmospheric oxygen, thus boosting performance and reducing waste. As a drop-in replacement with a distinct, low toxicity profile, EZ-Blox® enables the easy reformulation of paints and coatings to meet the strictest safety and regulatory standards.

ROCKBLOCK® solutions are lost circulation additives designed to quickly seal natural and induced fractures during lost circulation events. This line of proprietary lost circulation material (LCM) is field-proven to reduce losses when used as recommended, and has performed successfully in both North America and the Middle East.

KRAIBURG continually tries to set new standards in technology, quality, manufacturing, delivery performance, customer relations and service. Highly customized and cost-effective solutions far exceed the current standards. KRAIBURG is the leading specialist for the development and manufacture of rubber and silicone compounds that fulfill the most stringent requirements.

Ven-Fyber Medium™ is a premium blend of micronized, surface-modified organic fibers for the prevention and remediation of seepage loss to moderate whole fluid losses in drilling fluid applications. Ven-Fyber Medium™ is field proven around the world for the prevention and mitigation of seepage & moderate to severe whole fluid losses. Ven-Fyber Medium™ is composed of a blend of differing types of surface-modified micronized cellulosic fibers. The differing types and sizes of the source materials provide excellent bridging and matting of thief zones in the near well-bore formation for effective sealing and prevention of whole fluid losses.

Geotex® calcium carbonate is a line of coarse screened calcium carbonate products produced from high purity white marble mined in Marble Hill, Georgia. Each product is sifted through different sized screens to produce consistent material for a variety of applications. The Geotex Series is part of the entire Huber family of solutions. Other products include Alumina Trihydrate (ATH), Barium Sulfate, Magnesium Hydroxide (MDH), Silica and Silicates.

Desilube products and technology are used by worldwide lubricant leaders who recognize the high performance our products deliver while being environmentally friendly. ​ Desilube has several high performance EP/AW/AF additives which are NSF HX-1 certified and listed on the LuSC list, Ecolabel ready.

Stanyl is a high-performance aliphatic polyamide with a melting temperature of 295°C that due to its high crystallinity and fast crystallization speeds entails three key strengths: Excellent high-temperature mechanical performance Excellent wear and friction properties Superior flow

Fracsal Waterbase crosslinking additive consists of a specifically sized, sparingly-soluble borate crosslinking agent suspended an aqueous, crosslink modifier solution.

The raw material used for production is a derivative of palm kernel oil from certified crops. It is an anionic surfactant of the group of alkyl ether sulfates, based on natural alcohol

The Naxaf® naphthalene sulfonate formaldehyde condensates are used primarily as dispersants in a wide variety of industrial applications.

RD-600™ is a proprietary blend of acid soluble minerals and polymers designed to help bridge and seal a wide range of fracture sizes in a productive zone where acid solubility is required. RD-600™ is compatible in all completion fluids, from fresh water to bromide brines.

PecoBead 400™ is a multi-phase lubricant that is designed to decrease the co-efficient of friction in all water- base drilling fluids. The PecoBead 400™ decreases the coefficient of friction that reduces torque, drag and the potential for differential sticking in the wellbore.

EcoMul is an oxidized tall oil fatty acid primary emulsifier for invert oil drilling muds. It is used in diesel, mineral and synthetic oil base fluids. It works in high temperature environments and contributes to fluid loss control.

NOVEL Ethoxylates, nonionic surfactants, can be used in a variety of household and industrial cleaning applications. These unique surfactants will maximize your cleaning formulations with its fast cleaning kinetics and high performance characteristics. This product range is characterized by the following useful properties: high detergency and surface activity, good hard water stability, synergistic effects with other surfactants, favorable environmental characteristics, favorable emulsifying power, chemical stability over a wide pH range and user friendly viscosity and storage behavior. These characteristics make these products an ideal raw material building block for washing powder, detergent tablets, liquid detergents, detergency boosters, all-purpose cleaners, bathroom cleaners, floor cleaners, dishwashing detergents, vehicle cleaners and other defoamer and emulsifier applications.

SFG™ is a surfactant designed for use in our cement spacer systems to water-wet the formation and pipe surfaces, removing the excess hydrocarbon film left behind from non-aqueous drilling fluids. In this way, SFG aids cement bonding and zonal isolation to improve the integrity of the cement job. SFG can be used in both weighted and unweighted spacer systems, and provides excellent cleaning efficiency at low concentrations. When used properly, this cement spacer surfactant improves the effectiveness of the spacer system while displacing non-aqueous drilling fluid. Laboratory testing is recommended to determine optimal concentration.

Produced at the highest quality, our Esters serve as versatile ingredients in your formulations. The product range includes emollients, skin conditioners, emulsifiers, stabilizer, opacifiers and viscosity modifiers.Our MASESTER™ Medium Chain Triglycerides are, next to it's use in personal care, great ingredients for flavor, food & beverage and pharmaceutical industry. The versatile oil with helath benefits functions as solubilizer, clouding agent, excipient and wetting agent.MASESTER™ Functional Products are: PHO-free (Partially Hydrogenated Oil), non-GMO and nonallergenic derived from sustainable palm oil grown within Musim Mas plantations.All products are HALAL and KOSHER certified.

Pecomul 100™ is an invert mud emulsifier system comprised of oxidized and modified tall oil for diesel based drilling fluids.

Xytron PPS is a high-performance plastics compound based on linear polyphenylene sulfide that contributes to three key strengths: heat aging performance up to 240 °C; chemical resistance at high temperature; and dimensional stability.  This polyphenylene sulfide (PPS) offers excellent chemical resistance, dimensional stability and is intrinsically flame retardant because of its electrical properties. Xytron PPS offers high stiffness up to a glass transition temperature of 90°C, with a continuous use temperature between 240-260°C. This family of PPS grades is well suited for a broad range of automotive, electronics and electrical, water management and specialized industrial applications. 

LPA Solvent is a high-purity mixture of hydrotreated isoparaffins and naphthenics with very low levels of polynuclear aromatics. It is a clear liquid with a medium flash point and mild odor.

Paracril NBR grades are produced by cold and hot polymerization process. The cold process yields linear polymers with good processing characteristics and solubility in polar solvents. The hot polymerization process leads to more branching. Branching in the hot Paracril grades is more developed in the higher viscosity grades. The hot polymers offer improved green strength. &rosslinNed 3aracril N%5 grades are unique in processing and function.

SILFOAM® is WACKER’s innovative brand for smart foam control products. It covers silicone-based integrated system solutions for regulatingfoam-intensive applications, and thereby optimizing processes and end products. SILFOAM® foam-control systems are the result of a continuous process of applied R&D. SILFOAM® is carefully tested for its compatibility and effectiveness in the customer's formulations, thereby avoiding overfoaming in advance.

METALON products are manufactured, packaged and shipped from our plant in Burlington, Ontario, Canada.

Pecomul 350™ is an invert mud emulsifier and wetting agent comprised of secondary emulsifiers for synthetic based drilling fluids systems. Pecomul 350™ is designed using low aromatic base oils.