Products in Plastics: Impact Modifier

WELLPREN® IM898 is most suitable for substitution of Acrylic impact modifier (AIM) or blending with Acrylic impact modifier (AIM) with a certain percentage without adjusting the processing data and the formulation, resulting in an optimum performance /cost solution. All in, WELLPREN®RESIN helps fabricators and compounders meet increasing critically performance requirements and cost control needs.

ACTFLOW® UMM-1001 is a non-solvent functional and reactive acrylic polymer of low-molecular-weight that have come out of molecular weight control technology. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excellent normal-temperature fluidity, ACTFLOW® is recommended as a plasticizer replacement, modifying agent and additive agent.

Fine-Blend POE-g-MAH CMG5805-L is a maleic anhydride grafted polymer. The base polymer is a polyolefin elastomer with high flexibility, and it has white or light yellow particle appearance.

RESIMID B2880 EL is high impact modified Polyamide 6.

Shinepoly® LP2088 modifier has crosslinked silicone and butyl-acylate copolymer core with grafted poly-methyl methacrylate shell. It provides superior low temperature impact performance, thermal stability and hydrolytic resistance with minimum affect on flame retardant performance of PC.

IKAMOD MBS is type of transparent MBS impact modifier. It has dual benefits with balance of mechanical properties and optical properties and it is environment friendly.

HD-L01, PLA (polylactic acid) resin is a sustainable and compostable polymer that is ideal for applications warranting environmental consciousness and a path to sustainability. It is manufactured in a in a dry, easy-to-handle pellet for enhancing , PLA properties and processability.

Shandong Donglin New Materials MBS impact modifier DL-521S is a terpolymer prepared by emulsion polymerization of methyl methacrylate, butadiene and styrene. Due to its typical core-shell structure, it will not affect the transparency of the product and improve the impact strength; These products are mainly used to produce PVC indoor products, such as PVC pipes, card base materials, PVC transparent films and sheets, etc.

Shinepoly® LP2092 is the key raw material for transparent toughening PMMA resin. It exhibits high transparency and high toughness.

WELLPREN® IM878 is most suitable for substitution of Acrylic impact modifier (AIM) or blending with Acrylic impact modifier (AIM) with a certain percentage without adjusting the processing data and the formulation, resulting in an optimum performance /cost solution. All in, WELLPREN®RESIN helps fabricators and compounders meet increasing critically performance requirements and cost control needs.

Shandong Donglin New Materials MBS impact modifier DL-535 is a terpolymer prepared by emulsion polymerization of methyl methacrylate, butadiene and styrene. Due to its typical core-shell structure, it will not affect the transparency of the product and improve the impact strength; These products are mainly used to produce PVC indoor products, such as PVC pipes, card base materials, PVC transparent films and sheets, etc.

W1P is an anhydride modified ethylene propylene diene monomer. It is ethylene-propylene-diene monomer with functionalized maleic anhydride, which is especially suitable for super-touch or cold-resistant nylon.

Diene™55AC10 is a solution polymerized plastics grade medium cis polybutadiene, featuring excellent color and low gel. It is intermediate in solution viscosity and contains a non-volatile antioxidant system. Diene™55AC10 is widely used as an impact modifier for thermoplastic resins such as HIPS and ABS.

HD-L03, PLA (polylactic acid) resin is a sustainable and compostable polymer that is ideal for applications warranting environmental consciousness and a path to sustainability. It is manufactured in a in a dry, easy-to-handle pellet for enhancing , PLA properties and processability.

Diene™55AC15 is a solution polymerized plastics grade medium cis polybutadiene, featuring excellent color and low gel. It is intermediate in solution viscosity and contains a non-volatile and TNPP-free antioxidant system. Diene™ 55AC15 is widely used as an impact modifier for thermoplastic resins such as HIPS and ABS.

Blendex® SS 311 is a Substrate, Pipe (NSF).

Shandong Donglin New Materials PVC impact modifier CGA - 243 reduces the amount in the formula to replace CPE plus PVC processing aids. CGA is a special impact modifier for PVC developed by our company. This type of product is a high molecular polymer with a network interpenetrating structure. Its main function is to improve the low-temperature impact strength and toughness of PVC products and has the function of promoting the plasticization of PVC materials. Compared with other ordinary PVC impact modifier CGA series products, it can give PVC products the best impact strength and toughness. In addition, CGA series products do not have any chemical double bonds, so they have good weather resistance. CGA series products are not compatible with water and ethanol, but are soluble in acetone and chloroform.

WELLPREN® IM1090 is most suitable for substitution of Acrylic impact modifier (AIM) or blending with Acrylic impact modifier (AIM) with a certain percentage without adjusting the processing data and the formulation, resulting in an optimum performance /cost solution. All in, WELLPREN®RESIN helps fabricators and compounders meet increasing critically performance requirements and cost control needs.

Blendex® SS 308 is used for General purpose.

WELLPREN® 8000 is most suitable for substitution of Acrylic impact modifier (AIM) or blending with Acrylic impact modifier (AIM) with a certain percentage without adjusting the processing data and the formulation, resulting in an optimum performance /cost solution. All in, WELLPREN®RESIN helps fabricators and compounders meet increasing critically performance requirements and cost control needs.

Shinepoly® SN2085 modifier is a core-shell impact modifier with high Silicon rubber content that provides superior low temperature impact performance. Because of the core-shell structure, the improvement in impact performance is obtained with only minor effect on other mechanical properties such as modulus and heat distortion temperature.

ACTFLOW® CBB-3098 is a non-solvent functional and reactive acrylic polymer of low-molecular-weight that have come out of molecular weight control technology. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excellent normal-temperature fluidity, ACTFLOW® is recommended as a plasticizer replacement, modifying agent and additive agent..

IKAMOD 81 is an acrylic copolymer with a core-shell structure. IKAMOD 81 is a highly efficient impact modifier with excellent clarity and weathering performance. It enhances the mechanical properties of rigid transparent PVC products and is suitable for both outdoor and indoor applications.

W1 is an anhydride modified polyolefin elastomer. W1 is ethylene elastomer with functionalized maleic anhydride, which is especially suitable for reinforced or toughened nylon.

Natur-Tec® BF3002HT is a bio-based and compostable, impact modified, highly filled polymer masterbatch made with Ingeo™. It is intended for injection molded PLA applications that require high heat. BM3002HT is designed to be blended with virgin Ingeo™ grades where the final blend is molded either in (1) a single-step using in-mold crystallization at much reduced cycle times and minimum part warpage (BF3002IM) or (2) in a two-step economical process where parts are crystallized in a secondary oven (BF3002HT) .

Diene™40AC15 is a solution polymerized plastics grade medium cis polybutadiene, featuring excellent color and low gel. It is low in solution viscosity and contains a non-volatile and TNPPfree antioxidant system. Diene™ 40AC15 is primarily used as an impact modifier for thermoplastic resins such as HIPS and ABS.

RESIMID A2840 EL is medium impact modified Polyamide 6.6.

Golden Dragon Chemicals CPE 135 is chloridized by HDPE .Due to the molecule of CPE does not contain double bond, it has excellent weatherability, anti-flaming and wide application. It is mainly used as PVC impact modifier.

GuangDong Sky Bright PVC Processing Aid LS-61 is a core-shell structure Acrylic Impact Modifier. It can give PVC excellent impact performance as well as weatherability, coupled with the necessary properties of processing aids. It is an ideal impact modifier for rigid PVC profiles, sheets, boards, pipes, pipe fittings, etc. It imparts superior impact properties to rigid vinyl products. LS-61 offers excellent long term weather resistance, retained impact resistance, low-temperature impact resistance and ease of processing.

W1G is a maleic anhydride modified styrene-ethylene-butylene-styrene (SEBS) elastomer.

Shinepoly® LP2098 is the key raw material for transparent toughening PMMA resin. It exhibits high transparency and high toughness.

ACTFLOW® UT-1001 is a non-solvent functional and reactive acrylic polymer of low-molecular-weight that have come out of molecular weight control technology. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excellent normal-temperature fluidity, ACTFLOW® UT-1001 is recommended as a plasticizer replacement, modifying agent and additive agent.

WELLPREN® IM2090 is most suitable for substitution of Acrylic impact modifier (AIM) or blending with Acrylic impact modifier (AIM) with a certain percentage without adjusting the processing data and the formulation, resulting in an optimum performance /cost solution. All in, WELLPREN®RESIN helps fabricators and compounders meet increasing critically performance requirements and cost control needs.

WELLPREN® IM868 is most suitable for substitution of Acrylic impact modifier (AIM) or blending with Acrylic impact modifier (AIM) with a certain percentage without adjusting the processing data and the formulation, resulting in an optimum performance /cost solution. All in, WELLPREN®RESIN helps fabricators and compounders meet increasing critically performance requirements and cost control needs.

Shinepoly® LP2065X modifier is a acrylonitrile-styrene-acrylate (ASA) core-shell impact modifier with an enhanced stabilizer package that provides superior weatherability, heat aging, impact performance and excellent resistant of various chemical products. Because of the core-shell structure, the improvement in impact performance is obtained with only minor effect on other mechanical properties such as modulus and heat distortion temperature.

WELLPREN® IM500 is most suitable for substitution of Acrylic impact modifier (AIM) or blending with Acrylic impact modifier (AIM) with a certain percentage without adjusting the processing data and the formulation, resulting in an optimum performance /cost solution. All in, WELLPREN®RESIN helps fabricators and compounders meet increasing critically performance requirements and cost control needs.