Products in Plastics: Impact Modifier

METABLEN™ S 2130 is a silicone-acrylic-based rubber impact modifier optimized for flame retardant polycarbonate (PC) resins. It adds colorability, heat-aging resistance and impact strength to PC and polycarbonate blends in automotive, aerospace, consumer goods, and electric and electronic applications.FeaturesWeather stabilityHydrolysis resistanceImpact resistance even at low temperatures*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ SX-006 is a silicone-acrylic rubber-type impact modifier that provides impact strength and weatherability while maintaining melt-flow ability and scratch resistance of PMMA and SAN. It also gives vivid molded-in colors like piano black. The compounded resins can be widely used in automotive exterior applications (e.g. front grill, pillar, door mirror housing). Features High impact strength in all temperature zones High modulus and excellent heat aging resistance Excellent colorability *METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ S 2030 is a silicone-acrylic-based rubber impact modifier with excellent weatherability and super high impact strength at room temperature and low temperatures. It is used for polycarbonates (PC) and polycarbonate blends in automotive, aerospace, consumer goods, and electric and electronic applications.FeaturesGood impact strengthWeather stabilityHeat aging resistanceHydrolysis resistanceImpact resistance even at low temperatures *METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ S 2001 is a silicone-acrylic rubber-type impact modifier with high impact strength in all temperatures and excellent weatherability. It can be used with ABS, PC, PLA, and other matrix resins in a variety of automotive, aerospace and electric and electronic applications. Features Can be used with recycled plastics Good weather stability Low temperature impact resistance *METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ S-2006 is a silicone-acrylic-based rubber impact modifier with high-impact strength at low temperatures and strong hydrolysis resistance. It is used for a variety of plastics in consumer goods and electric and electronics applications.FeaturesGood weather stabilityHydrolysis resistanceImpact resistance even at low temperatures*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ SRK-200A is a silicone-acrylic-based rubber impact modifier with heat-aging resistance and impact strength. It is used for polycarbonate/acrylonitrile butadiene styrene (PC/ABS) and polycarbonate/polybutylene terephthalate (PC/PBT) in automotive, aerospace, consumer goods, and electric and electronic applications.FeaturesChemical resistanceWeather stabilityHeat resistanceHydrolysis resistanceImpact resistance even at low temperatures*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ S 2100 is a silicone-acrylic-based rubber impact modifier with good colorability and impact strength. It is used for polycarbonates (PC) and polycarbonate blends, polyvinyl chloride, engineering plastics and polyolefins in a variety of automotive, aerospace, consumer goods, and electric and electronic applications. METABLEN™ S-2100 provides ductility on facial impact tests, even after immersion of coating chemicals. The effect is maintained at higher molding temperatures. BenefitsEasy to processFlame retardancy for engineering plastics and polyolefins elastomersFeaturesGood colorabilityWeather stabilityHydrolysis resistanceImpact resistance even at low temperatures*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ W 450A is an acrylic rubber-type impact modifier with good weatherability and impact strength. It is used for polyvinyl chloride (PVC) in window frames, pipes and gutters.FeaturesHigh level of elasticity Good impact strengthMaintains weather stability*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ S X-005 is a silicone-acrylic rubber-type impact modifier that provides flame retardance, hydrolysis resistance and impact strength. It is used for polycarbonates (PC) and polycarbonate blends in automotive, aerospace, consumer goods, and electric and electronic applications.FeaturesFlame retardantWeather stabilityHydrolysis resistanceImpact resistance even at low temperaturesLow friction*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ W 600A is an acrylic rubber-type impact modifier with good weatherability and hydrolysis resistance. It is used for polylactic acid (PLA), polycarbonate/polybutylene terephthalate (PC/PBT) and polycarbonate/polyethylene terephthalate (PC/PBT) in 3D printer filaments and aerospace, consumer goods, and electric and electronic applications.FeaturesHigh level of hydrolysis resistance Good impact strengthMaintains weather stability*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ C 223A is a butadiene-based rubber and graft copolymer. It is used as an impact modifier for ABS, polyamides, PC, PLA, and other matrix resins in automotive and transportation, electrical and electronics, and consumer goods applications.FeaturesImpact resistanceSuper high impact strength in all temperatures*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ S 2501 is a is silicone-acrylic-rubber-type impact modifier that adds hydrolysis resistance, heat-aging resistance and impact strength to polycarbonate (PC), polylactic acid (PLA) and alloy in automotive, aerospace, consumer goods, and electric and electronic applications.FeaturesGood impact strengthWeather stabilityHeat aging resistance*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ S 2200 is a silicone-acrylic-based rubber impact modifier with an epoxy-modified shell.Compatible with Polyethylene terephthalate (PET), polybutylene terephthalate (PBT), polyamide (PA) and alloy, it provides hydrolysis resistance, heat-aging resistance and impact strength for a wide range of automotive, aerospace and electric and electronic applications.FeaturesWeather stabilityHydrolysis resistanceImpact resistance even at low temperatures *METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

METABLEN™ W 300A is an acrylic rubber-type impact modifier with good weatherability and impact strength. It is used for transparent polyvinyl chloride (PVC) in corrugated sheet and film.FeaturesHigh level of elasticity Excellent transparency propertiesGood impact strengthMaintains weather stability*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ S 2260 is a silicone-acrylic-based rubber core shell-type impact modifier that provides super high impact strength and weatherability to acrylonitrile butadiene styrene (ABS), acrylonitrile styrene acrylate (ASA) and poly methyl methacrylate (PMMA) through extrusion and moldings. It is used for esthetic exterior car components such as front grills, and housings for electronics.FeaturesWeather stabilityHydrolysis resistanceImpact resistance even at low temperatures*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

GENIOPERL® W35 is a polymer modifier with a linear structure based on functionalized silicone. It is specifically designed for use as a plastic additive. By incorporating GENIOPERL® W35 into thermoset polymer systems such as epoxy- or vinylester resins, the impact strength is significantly improved, particularly at low temperatures. This product offers enhanced performance and durability to the resulting plastic materials.

GENIOPERL® W36 is a polymer modifier with a linear structure based on functionalized silicone. It is specifically designed for use as a plastic additive. When incorporated into thermoset polymer systems, GENIOPERL® W36 enhances the impact strength, especially at low temperatures. Additionally, this product is formulated with internal anti-foam additives, which effectively reduce foam formation during vacuum casting processes.

GENIOPERL® P52 is a particulate polymer modifier available in powder form. The primary particles, which are spherical and reversibly agglomerated, consist of a low-modulus, crosslinked silicone core and an organic polymer shell. This unique composition enables GENIOPERL® P52 to enhance the impact strength of thermoplastic and thermoset polymer systems, particularly in low-temperature conditions.

Flyprene SIS 1126 is a clear, linear triblock copolymer based on styrene and isoprene. It has a polystyrene and diblock content of 16% and 50% (wt.%) respectively. It is used as an ingredient in formulating adhesives, sealants, and coatings. This product can also be used as a modifier for bitumen and polymers.

Flyprene SBS 791H is a clear, linear triblock copolymer based on styrene and butadiene, with a polystyrene content of 30% (wt.%). It is used in asphalt modification, and as a waterproofing material. This product may also find use as a modifier for polymers and adhesives.

Flyprene SBS 791 is a clear, linear triblock copolymer based on styrene and butadiene, with a polystyrene content of 30% (wt.%). It is used in asphalt modification, and as a waterproofing material. This product may also find use as a modifier for polymers and adhesives.

Flyprene SBS 792 is a clear, linear triblock copolymer based on styrene and butadiene, with a polystyrene content of 40% (wt.%). It is used in asphalt modification, and as a waterproofing material. This product may also find use as a modifier for polymers and adhesives.

Flyprene SIS 1124 is a clear, linear triblock copolymer based on styrene and isoprene. It has a polystyrene and diblock content of 14% and 25% (wt.%) respectively. It is used as an ingredient in formulating adhesives, sealants, and coatings. This product can also be used as a modifier for bitumen and polymers.

Flyprene SIS 1209 is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 29% (wt.%). It is used as an ingredient in formulating adhesives, sealants, and coatings. This product can also be used as a modifier for bitumen and polymers.

Flyprene SIS 1106 is a clear, linear triblock copolymer based on styrene and isoprene. It has a polystyrene and diblock content of 15% and 17% (wt.%) respectively. It is used as an ingredient in formulating adhesives, sealants, and coatings. This product can also be used as a modifier for bitumen and polymers.

Flyprene SIS 1105 is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 15% (wt.%). It is used as an ingredient in formulating adhesives, sealants, and coatings. This product can also be used as a modifier for bitumen and polymers.

Dar-Tech Hauthane HD-2024 is a soft, waterborne, aliphatic polyurethane dispersion that has no co-solvent and is manufactured without the use of solvent. The dispersion was specifically designed for use in coating or finishing textile fabrics as a cost-effective urethane. HD-2024 is unique because it is manufactured at high solids and without solvent. It is well-suited for use as a strength additive for acrylic polymers, providing increased strength, anti-fray, and abrasion resistance properties at an affordable price, whether used alone or as a strength additive.

CONSTAB CON-X® MA 217 PE is a product with the function of an impact modifier. It is labelled as recyclable, food contact-acceptable, and sustainable. The carriers used are polyethylene (PE) and resin-based. The product features high efficiency, freeze resistance, good stiffness, tear resistance, excellent seal properties, flexibility, and clarity.

CONSTAB CON-X® MA 218 PE is a product that functions as an impact modifier. It is labelled as recyclable, food contact-acceptable, and sustainable and uses polyethylene (PE) as its carrier. The features include high efficiency, good barrier properties, freeze resistance, good stiffness, tear resistance, excellent seal properties, food contact acceptability, flexibility, and recyclability.

CONSTAB CON-Batch 30X is particularly suitable for molded articles like containers, enabling downgauging of up to 30% of the total thickness without compromising its mechanical integrity. Additionally, it functions as an effective processing aid, improving optical properties, mechanics, and barrier performance, making it an excellent choice for container applications.

Hauthane HD-2024 is a co-solvent free, soft, aliphatic, water-borne, polyurethane dispersion. Features: Co-solvent free and high solids. Excellent cost/performance ratio Soft, tough, flexible, dry film. Excellent UV resistance. Excellent low temperature flexibility and crack resistance. Very good abrasion resistance.

MOCOM Compounds ALCOLOR® Function ABS IM LS A WT1068-07 is a 9% injection molding and 9% extrusion grade Acrylonitrile/Butadiene/Styrene/Copolymer (ABS). It is designed to meet wall thickness and color intensity requirements for different applications and operational areas. The base polymer is Acrylonitrile/Butadiene/Styrene/Copolymer, and the filler/additive system is a laser sensitive additive, with a lubricant. The color is white, similar to RAL 9003 and RAL 9016, and the light fastness colorant is blue woolscale 8. It has special features such as being laser etchable (dark etching), impact modified, containing a slip agent, high additive content, free from cadmium, lead and diarylide pigments, high dispersibility, and dust-free. It is suitable for use in automotive, machinery, electrical and electronic, furniture, building and construction, and sport and leisure applications, and its application areas are injection molded parts, extruded parts, and compounding.

MOCOM Compounds ALCOLOR® Function ABS IM LS A WT3056-10 is a white colorant, similar to RAL 9003, with a dosage of 9.0% for extrusion and injection molding, depending on wall thickness and required color intensity and application and operational area. It contains a Laser sensitive additive and a blue woolscale 8 Light Fastness colorant, and is based on Acrylonitrile/Butadiene/Styrene/Copolymer. It is laser etchable (dark etching), impact modified, high additive content, free from cadmium, lead, and diarylide pigments, and has high dispersibility and is dust-free. It is suitable for Automotive, Machinery, electrical and electronic, Furniture, building and construction, and sport and leisure applications, for injection molded parts, extruded parts, and compounding.

MOCOM Compounds ALPERFORM® PA IM NC2595-14 is a high-impact, modified and heat-stabilized polyamide 66 base polymer, suitable for application in cable ties. For optimal performance, it should be pre-dried in a dry air (dessiccant) dryer at temperatures below 80°C for 2-12 hours, depending on the moisture content, with a maximum moisture content of 0.15%. The injection molding temperature should be between 270-290°C, and the mold temperature should be between 40-80°C.

MOCOM Compounds ALCOLOR® Function ABS IM GY5030-17 is a gray color suitable for use in various applications, including electrical and electronic, furniture, building and construction, and sport and leisure. It is impact modified, free from cadmium, lead, and diarylide pigments, dust-free, and has a high dispersibility and additive content. The recommended dosage is 3.0% extrusion and 3.0% injection molding, depending on wall thickness and required color intensity.

MOCOM Compounds ALCOLOR® Function ABS IM LS A WT1111-07 is a polymeric colorant made of Acrylonitrile/Butadiene/Styrene/Copolymer, with a dosage of 9.0% for extrusion and 9.0% for injection molding dependent on wall thickness and required color intensity, depending on application and operational area. It has a light fastness colorant of blue woolscale 8, a color of white similar to RAL 9003 and similar to RAL 9016, and features laser etchable (dark etching), impact modified, high additive content, free from cadmium, lead, and diarylide pigments, high dispersibility, and dust-free properties. It is suitable for use in Automotive, Machinery, electrical and electronic, Furniture, building and construction, sport and leisure applications.