Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Knowde for Suppliers
Segments
Nutraceuticals & Supplements
undefined
View All
HI&I Cleaning & Formulating
Chemical Manufacturing
Pharmaceuticals
Pulp & Paper
Oil & Gas
Agriculture & Feed
Case & Construction
Formulated Adhesives & Coatings
Food & Nutrition
Personal Care
Mining
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde for Suppliers
Knowde
Plastics
Parts, Shapes & Films
Products in Parts, Shapes & Films
1,838 Products found in Parts, Shapes & Films
Filters
Suppliers
Applications
Physical Form
Polymer Name
End Uses
Features
Products
Brands
Suppliers
Formulations
Documents
Relevance
Mitsubishi Chemical Group Corporation
Nylatron® LFX PA6
Polymer Name:
Polyamide 6 (PA 6)
Physical Form:
Tube, Plates, Rods
Features:
X-Ray Shielding, Good Sliding Properties, Good Damping, High Hardness, High Fatigue Resistance, Excellent Stiffness, Lubricated, Wear Resistant, Excellent Mechanical Strength, Radiation Resistant, Excellent Toughness, Electrically Insulating, Good Machinability
Density:
1140.0 - 1140.0 kg/m³
Tensile Modulus:
3000.0 - 3000.0 MPa
Nylatron® LFX Polyamide PA6, a specially formulated internally lubricated material designed for unlubricated, highly loaded, and slowly moving parts applications. This advanced material offers a range of exceptional properties that make it a top choice for various industries, including pharmaceutical, biotechnology, medical, and processing.Features:Internally lubricated for unlubricated, highly loaded, and slowly moving parts applicationsHigh mechanical strength, stiffness, hardness, and toughnessGreat sliding propertiesHigh mechanical damping capabilitiesExceptional electrical insulating propertiesBenefits:Excellent wear resistance and easy machiningLow coefficient of frictionHigher values of PV (pressure / velocity)Good resistance to high energy radiations (Gamma and X Rays)High mechanical damping capacityGood sliding and thermal insulation propertiesApplications:Pharmaceutical, biotechnology, medical and processing industriesIdeal for use in gears, bearings, sprockets, and sheavesSuitable for use in various machinery and equipment
Mitsubishi Chemical Group Corporation
Nylatron® GSM PA6
Polymer Name:
Polyamide 6 (PA 6)
Physical Form:
Tube, Plates, Rods
Features:
Low Coefficient of Friction, High Strength, High Loading Absorption Capability, Excellent Toughness, Good Electrical Properties, High Impact Resistance, Good Mechanical Properties
Density:
1150.0 - 1150.0 kg/m³
Tensile Modulus:
3446.0 - 3446.0 MPa
Nylatron® GSM Polyamide PA6, a unique material that combines the benefits of Molybdenum Disulphide (MoS2) with the impact resistance of cast nylon products. This material is specifically designed to enhance load-bearing capabilities while maintaining its strength and toughness.Features:Contains finely divided particles of Molybdenum Disulphide (MoS2)Enhances load-bearing capabilitiesMaintains impact resistance inherent to cast nylon productsPossesses an ideal combination of strength and toughnessExhibits excellent mechanical and electrical propertiesBenefits:Can withstand high pressure and heavy loadsResistant to impact and wearProvides stability and durability in various applicationsCan be used in high-precision and automated equipmentApplications:GearsBearingsSprocketsSheavesConstruction and heavy equipment marketsNylatron® GSM Polyamide PA6 is an ideal solution for industries that require materials with high load-bearing capabilities, excellent impact resistance, and strong mechanical and electrical properties.
Mitsubishi Chemical Group Corporation
Ertacetal® H-TF POM-H
Polymer Name:
Polyacetal Homopolymer (POM)
Physical Form:
Plates
Features:
Excellent Stiffness, Lubricated, Low Moisture Absorption, Low Coefficient of Friction, Wear Resistant, High Strength, Improved Wear, Slip, Soft, Good Machinability, Good Sliding Properties, Low Friction
Density:
1500.0 - 1500.0 kg/m³
Tensile Modulus:
3100.0 - 3100.0 MPa
Ertacetal H-TF (POM-H + PTFE) is a Delrin® AF Blend, a combination of PTFE fibers evenly dispersed in a Delrin acetal resin. This material offers superior sliding properties, making it ideal for bearings, gears, and other low-friction applications. Compared to Ertacetal C and H, Ertacetal H-TF offers improved performance and longer wear life.Features:Low friction, long wearingHigh strength and toughnessHigh dimensional stability and machinabilityPTFE fibers evenly dispersed in a Delrin acetal resinBenefits:Reduced stick-slip behavior in bearings and other low-friction applicationsIncreased wear resistance and longer lifespanImproved performance in harsh environmentsFood-contact compliant for use in the food processing and packaging industryApplications:BearingsGearsPulleysConveyor wear partsAny other low-friction application requiring high strength and dimensional stability.
Mitsubishi Chemical Group Corporation
Semitron® ESd 410C PEI
Polymer Name:
Polyether Imide (PEI)
Physical Form:
Plates, Rods
Features:
ESD Protection, High Tolerance, Static-Dissipative, Odorless, Low Water Absorption, Low Thermal Expansion, Dimensional Stability
Density:
1410.0 - 1410.0 kg/m³
Tensile Modulus:
5850.0 - 5850.0 MPa
Color:
Black
Semitron® ESd 410C PEI Polyetherimide electro static dissipative shapes are the perfect solution for semiconductor and electronics handling environments. These shapes offer exceptional dimensional stability and can withstand temperatures up to 410º F without degradation. The unique properties of Semitron® ESd 410C PEI make it ideal for a wide range of applications, including handling tray, circuit board, hard disk drive, and sensitive processing equipment applications.Features:Surface resistivity of 104 - 106 ohms/sq.Thermal performance to 210 °C (410 °F)Low stress for tight tolerance machiningHigh strength and stiffnessBenefits:Excellent dimensional stabilityResistant to high temperaturesLow stress for tighter tolerances during machiningReduced coefficient of linear thermal expansionMinimal water absorptionApplications:Handling Trays: Trays manufactured from Semitron® ESd 410C dissipate static charges reliably and are dimensionally stable. (Prior materials: PPS, PEEK, Vespel® PI)Circuit Boards: Semitron ESd 410C is ideal for use in circuit boards as it offers excellent dimensional stability and can withstand high temperatures without degradation.Hard Disk Drives: Semitron ESd 410C is an ideal material for use in hard disk drives due to its high strength, low stress properties and exceptional dimensional stability.Sensitive Processing Equipment: Semitron ESd 410C offers low stress properties, minimal water absorption and high strength making it an ideal choice for use in sensitive processing equipment.
Mitsubishi Chemical Group Corporation
Nylatron® GS PA66
Polymer Name:
Polyamide 66 (PA 66)
Physical Form:
Rods, Tube, Plates
Features:
Excellent Toughness, Low Thermal Expansion, Good Electrical Properties, Good Mechanical Properties, High Strength, High Rigidity
Density:
1150.0 - 1150.0 kg/m³
Tensile Modulus:
3600.0 - 3600.0 MPa
Nylatron® GS PA66 is a premium grade of Polyamide PA66, reinforced with Molybdenum Disulphide (MoS2) to enhance its mechanical properties. This unique combination of materials offers outstanding strength, rigidity, and a lower coefficient of linear thermal expansion than other nylon products.Features:High mechanical strength, stiffness, hardness, and toughnessGood fatigue resistanceHigh mechanical damping abilityGood sliding propertiesExcellent wear resistanceGood electrical insulating propertiesGood resistance to high energy radiation (gamma and X-rays)Good machinabilityBenefits:Maintains fits and clearances, reducing the likelihood of seizing as bearingsEnhanced bearing and wear properties due to MoS2Excellent performance in high-precision applicationsApplications:Ideal for use in bushings, bearings, roller wheels, pulleys, sheaves, wear pads, valve seats, and seals in construction and heavy equipment industries.Can also be used in other high wear and load-bearing applications.Nylatron® GS PA66 is a superior choice for applications that require high strength, rigidity and wear resistance, making it a perfect solution for construction and heavy equipment industries.
Mitsubishi Chemical Group Corporation
Nylatron® 4.6 PA46
Polymer Name:
Polyamide 46 (PA 46)
Physical Form:
Plates, Rods
Features:
X-Ray Shielding, Heat Aging Resistant, Good Sliding Properties, Good Damping, High Hardness, High Fatigue Resistance, Creep Resistant, Excellent Stiffness, Wear Resistant, Excellent Mechanical Strength, Radiation Resistant, Excellent Toughness, Electrically Insulating, Good Machinability
Density:
1190.0 - 1190.0 kg/m³
Tensile Modulus:
3400.0 - 3400.0 MPa
Nylatron® GS PA66 is a premium grade of Polyamide PA66, reinforced with Molybdenum Disulphide (MoS2) to enhance its mechanical properties. This unique combination of materials offers outstanding strength, rigidity, and a lower coefficient of linear thermal expansion than other nylon products.Features:High mechanical strength, stiffness, hardness, and toughnessGood fatigue resistanceHigh mechanical damping abilityGood sliding propertiesExcellent wear resistanceGood electrical insulating propertiesGood resistance to high energy radiation (gamma and X-rays)Good machinabilityBenefits:Maintains fits and clearances, reducing the likelihood of seizing as bearingsEnhanced bearing and wear properties due to MoS2Excellent performance in high-precision applicationsApplications:Ideal for use in bushings, bearings, roller wheels, pulleys, sheaves, wear pads, valve seats, and seals in construction and heavy equipment industries.Can also be used in other high wear and load-bearing applications.Nylatron® GS PA66 is a superior choice for applications that require high strength, rigidity and wear resistance, making it a perfect solution for construction and heavy equipment industries.
Mitsubishi Chemical Group Corporation
Techtron® PSBG PPS
Polymer Name:
Polyphenylene Sulfide (PPS)
Physical Form:
Rods, Plates
Features:
Lubricated, Low Thermal Expansion, Dimensional Stability, Corrosion Resistant, Chemical Resistant, Wear Resistant, High Tolerance, Electrically Conductive
Density:
1520.0 - 1520.0 kg/m³
Tensile Modulus:
6340.64 - 6340.64 MPa
Color:
Black
Techtron® PSBG is a high-performance polymer that combines the excellent chemical and corrosion resistance of Polyphenylene Sulfide (PPS) with the added strength and durability of carbon fiber reinforcement. This compression-molded material is internally lubricated and designed to excel in wear applications where an electrically conductive material is required.Key features:Excellent wear resistance: internally lubricated and carbon fiber-reinforced, allowing it to withstand high loads and minimize wear and tearOutstanding dimensional stability: minimal moisture absorption and low coefficient of linear thermal expansion, making it easy to maintain tight tolerancesExtreme chemical and corrosion resistance: ideal for use in demanding environmentsLow coefficient of linear thermal expansion: making it suitable for applications where dimensional stability is criticalElectrically conductive: ideal for wear applications that require electrical conductivityBenefits:Improved performance and durability of components in demanding environmentsIncreased resistance to chemicals, corrosion and wearEnhanced precision and dimensional stabilityImproved electrical conductivityApplications:Bushings and bearings, lantern rings, and pump wear components in the oil and gas industryElectrical components as it is electrically conductiveAutomotive and aerospace components as it can withstand high temperatures.Wear-resistant components in general, as it is internally lubricated and reinforced with carbon fiberTechtron® PSBG is a versatile and reliable material that can help improve the performance and longevity of your products. It's available in a range of shapes and sizes, making it easy to incorporate into your designs.
Mitsubishi Chemical Group Corporation
Nylatron® FST PA66
Polymer Name:
Polyamide 66 (PA 66)
Physical Form:
Rods, Plates
Features:
Low Thermal Expansion, Good Machinability, Reduced Noise, High Temperature Resistance, Light Weight, Improved Wear
Density:
1140.0 - 1140.0 kg/m³
Tensile Modulus:
3500.0 - 3500.0 MPa
Nylatron® FST Polyamide PA66 is a fire, smoke, and toxicity retardant engineering plastic that is designed to withstand extreme temperatures up to 347° F / 175° C. This grade is JAR / FAR 25.853 compliant, making it the first engineering plastic to achieve this standard. It is specifically developed for aircraft interior environments and is often used as a replacement for metal parts in various applications such as brackets, seal bushings, slide rails, and duct seals.Features:Fire, smoke, and toxicity retardantWithstands temperatures up to 347° F / 175° CJAR / FAR 25.853 compliantBenefits:Provides superior fire safety for aircraft interior environmentsCan withstand extreme temperatures, making it suitable for high-temperature applicationsMeets industry standards for fire and smoke safety, making it a reliable and safe choice for various applicationsApplications:Aircraft interior environmentsBracketsSeal bushingsSlide railsDuct sealsOther high-temperature and fire safety applications.
Mitsubishi Chemical Group Corporation
Ertacetal® C POM-C
Polymer Name:
Polyacetal Copolymer (POM)
Physical Form:
Plates, Rods
Features:
Good Sliding Properties, High Hardness, Exceptional Resilience, General Purpose, Food Contact Acceptable, Creep Resistant, Excellent Stiffness, Low Moisture Absorption, Wear Resistant, Excellent Mechanical Strength, Excellent Dielectric Properties, Non-porous, Low Water Absorption, Electrically Insulating, Good Cost-Performance Ratio, Good Machinability, Dimensional Stability
Density:
1410.0 - 1410.0 kg/m³
Tensile Modulus:
3000.0 - 3000.0 MPa
Ertacetal® C POM-C / Acetron® GP Polyoxymethylene POM-C is a general purpose, copolymer acetal grade that is known for its porosity-free nature and low moisture absorption. These POM-C shapes also offer excellent machinability capabilities, making it a very versatile material that can excel in a multitude of environments.Features:Porosity-free materialLow moisture absorptionExcellent machinabilityBenefits:Suitable for use in food contact and medical applicationsMeets FDA, NSF, Canada AG, and SSI Standard compliance requirementsCan be used in a variety of environmentsApplications:Food processing and packaging equipmentMedical and diagnostic equipmentBearings and bushingsGears and electrical componentsValves and fluid handling components
SABIC's Specialties Business
ELCRES™ Dielectric Film HTV150A
Physical Form:
Film
Features:
Self Healing, Unreinforced, Metallizable, High Electric Breakdown Strength, Very Good Heat Resistance, Excellent Dielectric Properties, Good Adhesion
Color:
Natural
ELCRES™ Dielectric Film HTV150A by SABIC is designed to meet high-temperature demands for professional DC-Link power capacitors, catering to evolving high-voltage industry needs. With stability across temperatures (-40°C to +150°C) and frequencies (up to 100 kHz), ELCRES™ HTV150A film offers consistent properties. This includes sustained capacitance, robust insulation resistance, a steady dielectric constant (Dk), and a minimal dissipation factor (Df).
THAI WAH
ROSECO® Mulch Film SM1
Tensile Modulus:
45.0 - 45.0 MPa
ROSECO® Mulch Film SM1 is a biocompostable black mulch film with high strength and mechanical performance. This layer of black mulch stops light from penetrating, encourages photosynthesis, keeps the soil moist, inhibits weed growth, boosts yield, and saves harvesting expenses.
SABIC's Specialties Business
ULTEM™ Dielectric Film UTF120
Polymer Name:
Polyether Imide (PEI)
Physical Form:
Film
Features:
Temperature Resistance, Flame Retardant, Unreinforced, Dimensional Stability, Design Flexibility, High Electric Breakdown Strength, Ease of Handling, Flame Resistant, Excellent Dielectric Properties
Density:
1290.0 - 1290.0 kg/m³
SABIC's Specialties Business ULTEM™ Dielectric Film UTF120 provides solutions for small to medium-sized, professional-grade capacitors, up to 10 microfarads in capacitance, to meet challenging industry requirements. The film exhibits stable properties across a range of temperatures (-40°C to +150 °C) and frequencies, including stable capacitance, good insulation resistance, a stable dielectric constant (Dk), and a low dissipation factor (Df). ULTEM™ Dielectric Film UTF120 has been validated by customers for use with both film-foil and metalized electrodes, including flat aluminum, heavy edge/light body, and fused/patterned electrode designs. It also offers excellent handling through metallization, winding, and capacitor squashing/flattening. Capacitors using this film are capable of passing industry-standard 260°C reflow soldering processes. It is available in 4, 5, 7, and 10-micron gauges and sold in 620mm x 5000m size rolls.
Dar-Tech Inc.
CDF Foil Material #ROLL 24X 200-05-09
Polymer Name:
Polypropylene/Foil/Polyethylene Film
Physical Form:
Film
Features:
Good Moisture Resistance, Oxygen Barrier, Food Contact Acceptable
CDF Foil Material #ROLL 24X 200-05-09 is a specialty foil material used for applications where oxygen and moisture vapor protection are important. It can be used to protect objects from dust, grease, or other contaminates. This material conforms to FDA regulations, Part 177.1520 CFR, for direct food contact.
Dar-Tech Inc.
CDF Foil Material #ROLL 48X 200-05-09
Polymer Name:
Polypropylene/Foil/Polyethylene Film
Physical Form:
Film
Features:
Good Moisture Resistance, Oxygen Barrier, Food Contact Acceptable
CDF Foil Material #ROLL 48X 200-05-09 is a specialty foil material used for applications where oxygen and moisture vapor protection are important. It can be used to protect objects from dust, grease, or other contaminates. This material conforms to FDA regulations, Part 177.1520 CFR, for direct food contact.
AGC Chemicals Americas, Inc.
Fluon® ETFE Film - Advanced Fluoropolymer Film 200NJ
Density:
1750.0 - 1750.0 kg/m³
AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 200NJ is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.
AGC Chemicals Americas, Inc.
Fluon® ETFE Film - Advanced Fluoropolymer Film 21GS
Density:
1750.0 - 1750.0 kg/m³
AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 21GS is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.
AGC Chemicals Americas, Inc.
Fluon® ETFE Film - Advanced Fluoropolymer Film 50N
Density:
1750.0 - 1750.0 kg/m³
AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 50N is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.
AGC Chemicals Americas, Inc.
Fluon® ETFE Film - Advanced Fluoropolymer Film 100N
Density:
1750.0 - 1750.0 kg/m³
AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 100N is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.
AGC Chemicals Americas, Inc.
Fluon® ETFE Film - Advanced Fluoropolymer Film 50LM
Density:
1750.0 - 1750.0 kg/m³
AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 50LM is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.
AGC Chemicals Americas, Inc.
Fluon® ETFE Film - Advanced Fluoropolymer Film 250NJ
Density:
1750.0 - 1750.0 kg/m³
AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 250NJ is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.
AGC Chemicals Americas, Inc.
Fluon® ETFE Film - Advanced Fluoropolymer Film 25N
Density:
1750.0 - 1750.0 kg/m³
AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 25N is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.
AGC Chemicals Americas, Inc.
Fluon® ETFE Film - Advanced Fluoropolymer Film 50MW
Density:
1750.0 - 1750.0 kg/m³
AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 50MW is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.
AGC Chemicals Americas, Inc.
Fluon® ETFE Film - Advanced Fluoropolymer Film 50HK(KN)
Density:
1750.0 - 1750.0 kg/m³
AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 50HK(KN) is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.
AGC Chemicals Americas, Inc.
Fluon® ETFE Film - Advanced Fluoropolymer Film 25MW
Density:
1750.0 - 1750.0 kg/m³
AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 25MW is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.
AGC Chemicals Americas, Inc.
Fluon® ETFE Film - Advanced Fluoropolymer Film 40N
Density:
1750.0 - 1750.0 kg/m³
AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 40N is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.
AGC Chemicals Americas, Inc.
Fluon® ETFE Film - Advanced Fluoropolymer Film 12N
Polymer Name:
Ethylene Tetrafluoroethylene Copolymer (ETFE)
Physical Form:
Film
Features:
High Durability, Non Stick, High Performance, UV Resistant, Good Moldability, High Dielectric Strength, Flexible, Excellent Transparency Properties, Excellent Flexibility, Good Mold Release, Excellent Anti-Fouling Properties, Low Dielectric Constant, Outdoor Durability, Good UV Resistance, Good Electrical Properties, Corona Treated, Very Good Heat Resistance, High Light Transmission, Good Weather Stability, Chemical Resistant, Wide Temperature Operating Range, Good Mechanical Properties
Density:
1750.0 - 1750.0 kg/m³
Color:
Transparent
AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 12N is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.
Norplex-Micarta
Norplex-Micarta NP342
Polymer Name:
Phenolic Compound
Reinforcement Material:
Cotton
Physical Form:
Fabric, Sheets
Density:
1350.0 - 1350.0 kg/m³
Features:
Good Machinability, General Purpose, Non Abrasive, Reduced Noise, Cost Effective, Wear Resistant
Fine weave canvas phenolic material with fabric construction weight intermediate to NP310 and NP320. NP342 is designed for better machining than grade NP310 and lower cost than NP320. NP342 meets or exceeds the requirements of MIL-I-24768/16 and IEC-60893-4-PF CC 201.
Norplex-Micarta
Norplex-Micarta NP511EM
Polymer Name:
Epoxy Resins & Compounds
Reinforcement Material:
Glass Fibers
Physical Form:
Sheets, Fabric
Density:
1800.0 - 1800.0 kg/m³
Features:
High Temperature Strength, Excellent Mechanical Strength, Enhanced Physical Properties, Arc Resistant, Good Electrical Properties, Good Machinability
NP511EM is constructed of a woven glass fabric combined with a high temperature, easy machining epoxy resin. It has excellent mechanical strength and electrical properties at elevated temperatures. The continuous operating temperature is 190°C, in mechanical applications. This material meets NEMA G-11 and MIL-I-24768/3, Type GEB.
Norplex-Micarta
Norplex-Micarta NP500A
Polymer Name:
Epoxy Resins & Compounds
Reinforcement Material:
Glass Fibers
Physical Form:
Sheets, Fabric
Density:
1770.0 - 1770.0 kg/m³
Features:
Thermally Insulating, Enhanced Physical Properties, Cost Effective, Good Mechanical Properties, Good Electrical Properties, Good Machinability, Low Temperature Strength
NP500A is constructed of a woven glass fabric combined with easy-machining, non-brominated epoxy resin. It is engineered to provide NEMA grade G-10 properties, but is easier to machine and more cost effective in many applications. Applications for NP500A include; low temperature thermal insulation, structural applications and various other mechanical, and electrical applications at low to moderately high temperatures. NP500A meets or exceeds the requirements of MIL-I-24768/2.
Norplex-Micarta
Norplex-Micarta NP320U
Polymer Name:
Phenolic Compound
Reinforcement Material:
Cotton
Physical Form:
Sheets
Density:
1340.0 - 1340.0 kg/m³
Features:
Good Machinability, Wear Resistant, Reduced Noise
Utility version of NP320E. Meets most, but not all, NEMA properties for L and LE, and is not certifiable as a NEMA Grade.
Norplex-Micarta
Norplex-Micarta NP500CR
Polymer Name:
Epoxy Resins & Compounds
Reinforcement Material:
Glass Fibers
Physical Form:
Sheets, Fabric
Density:
1800.0 - 1800.0 kg/m³
Features:
Enhanced Physical Properties, Good Electrical Properties, Thermally Conductive
NP500CR (commonly referred to as G10 CR) consists of a glass fabric with an epoxy resin system resulting in excellent electrical characteristics and superior physical properties at cryogenic temperatures (-270 °C to 135 °C operating temperature range). Previously designated as Westinghouse/International Paper Micarta Cryogenic Grade 56 G12, it has low thermal conductivity and utilizes chemistry specifically designed for cryogenic applications.
Norplex-Micarta
Norplex-Micarta NP504
Polymer Name:
Phenolic Compound
Reinforcement Material:
Glass Fibers
Physical Form:
Fabric, Sheets
Density:
1800.0 - 1800.0 kg/m³
Features:
High Temperature Resistance, High Temperature Strength, Good Impact Strength, Good Flexural Modulus, Good Compressive Strength, Creep Resistant
Woven glass fabric with high temperature phenolic resin. Good flexural, compressive and impact strengths at elevated temperatures. It is capable of continuous operation at 175°C. NP504 has excellent creep resistance because of the phenolic resin system. Meets MIL-I-24768/18 GPG. For NFPA 130 data please reference document NP504 Additional Data Sheet - NFPA 130. Certification to IEC standard is pending.
Norplex-Micarta
Norplex-Micarta MC320LE
Polymer Name:
Phenolic Compound
Reinforcement Material:
Cotton
Physical Form:
Sheets
Density:
1380.0 - 1380.0 kg/m³
Features:
Low Moisture Absorption, Bearing Grade, Wear Resistant, Good Electrical Properties, Medium Strength, Good Machinability
Grade MC320LE is a fine weave bleached cotton phenolic composite that has excellent machining characteristics and low moisture absorption. Applications include marine applications, terminal boards and parts requiring medium strength and excellent electrical characteristics. MC320LE meets or exceeds the requirements of MIL-I-24768/13 and ASMT F2953-12 Type FB. Certification to IEC standard is pending.
Norplex-Micarta
Norplex-Micarta NP515LS
Polymer Name:
Phenolic Compound
Reinforcement Material:
Glass Fibers
Physical Form:
Fabric, Sheets
Density:
1890.0 - 1890.0 kg/m³
Features:
High Performance, High Temperature Strength, Thermally Insulating, Good Shrinkage Resistance
NP515LS is a woven glass fabric combined with a high temperature phenolic resin. It is engineered to provide superior shrink characteristics at elevated temperatures, making it an ideal material for insulating gaskets. Having been tested and certified as a NEMA G-3 material, NP515LS also meets or exceeds the requirements of IEC 60893-3-4 PF GC 201.
Norplex-Micarta
Norplex-Micarta NP310U
Polymer Name:
Phenolic Compound
Reinforcement Material:
Cotton
Physical Form:
Sheets
Density:
1350.0 - 1350.0 kg/m³
Features:
Cost Effective, General Purpose
Utility grade canvas phenolic with properties similar to NP310E. Not certifiable to NEMA due to low crosswise flexural strength.
Norplex-Micarta
Norplex-Micarta NP322
Polymer Name:
Phenolic Compound
Reinforcement Material:
Cotton
Physical Form:
Sheets
Density:
1390.0 - 1390.0 kg/m³
Features:
Excellent Lubricity, Excellent Mechanical Strength, Reduced Noise, Cost Effective, Wear Resistant, Non-conductive, Good Machinability
NP322 is composed of a linen substrate combined with a phenolic resin system which contains molybdenum disulfide for reduced wear and increased lubrication. Provides the same lubricity as NP313, but has better machining qualities. The mechanical strength is similar to, but slightly less than NP320. NP322 is used in applications where reduced wear is needed in non-conductive applications.
Show
36
of 1,838 results
Go to page
1
2
3
4
5
6
7
8
9
10