Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Knowde for Suppliers
Segments
Nutraceuticals & Supplements
undefined
View All
HI&I Cleaning & Formulating
Chemical Manufacturing
Pharmaceuticals
Pulp & Paper
Oil & Gas
Agriculture & Feed
Case & Construction
Formulated Adhesives & Coatings
Food & Nutrition
Personal Care
Mining
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde for Suppliers
Knowde
Plastics
Parts, Shapes & Films
Products in Parts, Shapes & Films
1,842 Products found in Parts, Shapes & Films
Filters
Suppliers
Applications
Physical Form
Polymer Name
End Uses
Features
Products
Brands
Suppliers
Formulations
Documents
Relevance
Norplex-Micarta
Norplex-Micarta NP320U
Polymer Name:
Phenolic Compound
Reinforcement Material:
Cotton
Physical Form:
Sheets
Density:
1340.0 - 1340.0 kg/m³
Features:
Good Machinability, Wear Resistant, Reduced Noise
Utility version of NP320E. Meets most, but not all, NEMA properties for L and LE, and is not certifiable as a NEMA Grade.
Norplex-Micarta
Norplex-Micarta NP329
Polymer Name:
Melamine Formaldehyde (MF)
Reinforcement Material:
Cotton
Physical Form:
Sheets
Density:
1470.0 - 1470.0 kg/m³
Features:
Good Machinability, High Hardness, Arc Resistant, Durable
Bleached linen with melamine resin system. NP329 provides better arc resistance than NP320E. Also, resistant to ammonia based refrigerants. Hard, durable material should be heated to punch, but machines very well with standard machining equipment. NP329 meets UL94, HB.
Norplex-Micarta
Norplex-Micarta MC223
Polymer Name:
Phenolic Compound
Reinforcement Material:
Cotton
Physical Form:
Sheets
Density:
1440.0 - 1440.0 kg/m³
Features:
Bearing Grade
Grade MC223 is a medium weave cotton phenolic composite. Typical applications include pintle and stave-type bearings for rudder shafts in the marine industry. This material is known industry wide as “Marine Micarta.” This product is also suitable for heavy equipment applications that require finer machining profiles than those provided by bearing-grade laminates.
Norplex-Micarta
Norplex-Micarta NP310
Polymer Name:
Phenolic Compound
Reinforcement Material:
Cotton
Physical Form:
Sheets
Density:
1370.0 - 1370.0 kg/m³
Features:
Non Abrasive, Good Impact Strength, Good Mechanical Properties, Wear Resistant, UL Listed, Good Machinability
NP310 is a canvas machining grade for structural and mechanical applications. It has better impact strength than phenolic paper grades. NP310 meets or exceeds the requirements of MIL-I-24768/16 and IEC-60893-4-PF CC 201.
Norplex-Micarta
Norplex-Micarta MC511SN
Polymer Name:
Epoxy Resins & Compounds
Reinforcement Material:
Glass Fibers
Physical Form:
Sheets, Fabric
Density:
1800.0 - 1800.0 kg/m³
Features:
Static-Dissipative
MC511SN, StatNot™, is a static dissipative epoxy, woven glass based material with excellent control of the static dissipative properties. This material is used where static dissipation is required from surfaces to surface of the composite, in the x, y and z directions.
Norplex-Micarta
Norplex-Micarta NP130HF
Polymer Name:
Epoxy Resins & Compounds
Reinforcement Material:
Glass Fibers
Physical Form:
Fabric, Sheets
Density:
1950.0 - 1950.0 kg/m³
Features:
High Flexural Modulus, Warp Resistant, High Stiffness, Dimensional Stability, Enhanced Physical Properties
NP130HF is a woven glass fabric composite combined with epoxy resin system, which is engineered to provide better physical properties than standard NEMA FR-4. It is significantly more dimensionally stable than NP130 or NP510A because of its low resin content. The main application for NP130HF is for “bed-of-nails” probe boards used for printed circuit board testing, and other structural applications. Certification to IEC-60893-3-2 EP GC 202
Norplex-Micarta
Norplex-Micarta NP342LS
Polymer Name:
Phenolic Compound
Reinforcement Material:
Cotton
Physical Form:
Sheets
Density:
1370.0 - 1370.0 kg/m³
Features:
Good Moisture Resistance, Good Machinability, General Purpose, High Temperature Strength, Excellent Mechanical Strength, Dimensional Stability, Low Shrinkage
Fine weave canvas phenolic engineered for dimensional stability and mechanical strength at temperatures as high as 125ºC. Providing excellent moisture resistance and easy to machine, NP342LS low-shrink material was designed for use in Class B generators for wedge applications and can be tested to the General Electric specification A50A341.
Norplex-Micarta
Norplex-Micarta MC320LE
Polymer Name:
Phenolic Compound
Reinforcement Material:
Cotton
Physical Form:
Sheets
Density:
1380.0 - 1380.0 kg/m³
Features:
Low Moisture Absorption, Bearing Grade, Wear Resistant, Good Electrical Properties, Medium Strength, Good Machinability
Grade MC320LE is a fine weave bleached cotton phenolic composite that has excellent machining characteristics and low moisture absorption. Applications include marine applications, terminal boards and parts requiring medium strength and excellent electrical characteristics. MC320LE meets or exceeds the requirements of MIL-I-24768/13 and ASMT F2953-12 Type FB. Certification to IEC standard is pending.
Norplex-Micarta
Norplex-Micarta NP504
Polymer Name:
Phenolic Compound
Reinforcement Material:
Glass Fibers
Physical Form:
Fabric, Sheets
Density:
1800.0 - 1800.0 kg/m³
Features:
High Temperature Resistance, High Temperature Strength, Good Impact Strength, Good Flexural Modulus, Good Compressive Strength, Creep Resistant
Woven glass fabric with high temperature phenolic resin. Good flexural, compressive and impact strengths at elevated temperatures. It is capable of continuous operation at 175°C. NP504 has excellent creep resistance because of the phenolic resin system. Meets MIL-I-24768/18 GPG. For NFPA 130 data please reference document NP504 Additional Data Sheet - NFPA 130. Certification to IEC standard is pending.
Norplex-Micarta
Norplex-Micarta NP515LS
Polymer Name:
Phenolic Compound
Reinforcement Material:
Glass Fibers
Physical Form:
Fabric, Sheets
Density:
1890.0 - 1890.0 kg/m³
Features:
High Performance, High Temperature Strength, Thermally Insulating, Good Shrinkage Resistance
NP515LS is a woven glass fabric combined with a high temperature phenolic resin. It is engineered to provide superior shrink characteristics at elevated temperatures, making it an ideal material for insulating gaskets. Having been tested and certified as a NEMA G-3 material, NP515LS also meets or exceeds the requirements of IEC 60893-3-4 PF GC 201.
Norplex-Micarta
Norplex-Micarta NP511EM
Polymer Name:
Epoxy Resins & Compounds
Reinforcement Material:
Glass Fibers
Physical Form:
Sheets, Fabric
Density:
1800.0 - 1800.0 kg/m³
Features:
High Temperature Strength, Excellent Mechanical Strength, Enhanced Physical Properties, Arc Resistant, Good Electrical Properties, Good Machinability
NP511EM is constructed of a woven glass fabric combined with a high temperature, easy machining epoxy resin. It has excellent mechanical strength and electrical properties at elevated temperatures. The continuous operating temperature is 190°C, in mechanical applications. This material meets NEMA G-11 and MIL-I-24768/3, Type GEB.
Norplex-Micarta
Norplex-Micarta NP500A
Polymer Name:
Epoxy Resins & Compounds
Reinforcement Material:
Glass Fibers
Physical Form:
Sheets, Fabric
Density:
1770.0 - 1770.0 kg/m³
Features:
Thermally Insulating, Enhanced Physical Properties, Cost Effective, Good Mechanical Properties, Good Electrical Properties, Good Machinability, Low Temperature Strength
NP500A is constructed of a woven glass fabric combined with easy-machining, non-brominated epoxy resin. It is engineered to provide NEMA grade G-10 properties, but is easier to machine and more cost effective in many applications. Applications for NP500A include; low temperature thermal insulation, structural applications and various other mechanical, and electrical applications at low to moderately high temperatures. NP500A meets or exceeds the requirements of MIL-I-24768/2.
Norplex-Micarta
Norplex-Micarta MC507U
Polymer Name:
Silicone Elastomer
Reinforcement Material:
Glass Fibers
Physical Form:
Sheets
Density:
1880.0 - 1880.0 kg/m³
Features:
Thermally Insulating, Excellent Strength, Bearing Grade, Electrically Insulating, Good Electrical Properties
MC507U is a utility grade, glass fabric combined with a silicone resin system. It can be substituted for NEMA G-7, in most heating, appliance insulation and some bearing applications. MC507U has excellent strength and electrical properties. MC507U complies with MIL-I-24768/17 – GSG, with the exception of some specific electrical properties. Certification to IEC standard is pending.
Norplex-Micarta
Norplex-Micarta NP510A
Polymer Name:
Epoxy Resins & Compounds
Reinforcement Material:
Glass Fibers
Physical Form:
Sheets, Fabric
Density:
1850.0 - 1850.0 kg/m³
Features:
Good Impact Strength, Good Flexural Modulus, Good Bonding Strength, Brominated, Electrically Insulating, Good Electrical Properties, Consistent High Quality, UL Listed
NP510A is a woven glass fabric composite combined with epoxy resin system. It is engineered to provide NEMA grade FR-4 properties. This material contains bromine on the epoxy resin backbone. NP510A is certifiable to MIL-I-24768/27, Type GEE-F.
Norplex-Micarta
Norplex-Micarta NP130
Polymer Name:
Epoxy Resins & Compounds
Reinforcement Material:
Glass Fibers
Physical Form:
Sheets, Fabric
Density:
1800.0 - 1800.0 kg/m³
Features:
Flame Retardant
NP130 is a woven glass fabric combined with halogenated epoxy resin system. NP130 is produced to printed circuit board quality standards. It is flame retardant, and meets the requirements of MIL-I-24768/27, Type GEE-F and IEC-60893-3-2 EP GC 202.
Norplex-Micarta
Norplex-Micarta NP310HT
Polymer Name:
Phenolic Compound
Reinforcement Material:
Cotton
Physical Form:
Sheets
Density:
1370.0 - 1370.0 kg/m³
Features:
Non Abrasive, Good Impact Strength, Dimensional Stability, Good Mechanical Properties, Wear Resistant, Good Machinability
Canvas machining grade for structural and mechanical applications. NP310HT has better impact strength than phenolic paper grades. It meets the requirements of MIL-I-24768/16, IEC-60893-4-PF CC 201 and is designed to meet GE specification A19B15B1.
Norplex-Micarta
Norplex-Micarta NP500CR
Polymer Name:
Epoxy Resins & Compounds
Reinforcement Material:
Glass Fibers
Physical Form:
Sheets, Fabric
Density:
1800.0 - 1800.0 kg/m³
Features:
Enhanced Physical Properties, Good Electrical Properties, Thermally Conductive
NP500CR (commonly referred to as G10 CR) consists of a glass fabric with an epoxy resin system resulting in excellent electrical characteristics and superior physical properties at cryogenic temperatures (-270 °C to 135 °C operating temperature range). Previously designated as Westinghouse/International Paper Micarta Cryogenic Grade 56 G12, it has low thermal conductivity and utilizes chemistry specifically designed for cryogenic applications.
Norplex-Micarta
Norplex-Micarta NP310U
Polymer Name:
Phenolic Compound
Reinforcement Material:
Cotton
Physical Form:
Sheets
Density:
1350.0 - 1350.0 kg/m³
Features:
Cost Effective, General Purpose
Utility grade canvas phenolic with properties similar to NP310E. Not certifiable to NEMA due to low crosswise flexural strength.
Norplex-Micarta
Norplex-Micarta NP322
Polymer Name:
Phenolic Compound
Reinforcement Material:
Cotton
Physical Form:
Sheets
Density:
1390.0 - 1390.0 kg/m³
Features:
Excellent Lubricity, Excellent Mechanical Strength, Reduced Noise, Cost Effective, Wear Resistant, Non-conductive, Good Machinability
NP322 is composed of a linen substrate combined with a phenolic resin system which contains molybdenum disulfide for reduced wear and increased lubrication. Provides the same lubricity as NP313, but has better machining qualities. The mechanical strength is similar to, but slightly less than NP320. NP322 is used in applications where reduced wear is needed in non-conductive applications.
Norplex-Micarta
Norplex-Micarta NP320
Polymer Name:
Phenolic Compound
Reinforcement Material:
Cotton
Physical Form:
Sheets
Density:
1340.0 - 1340.0 kg/m³
Features:
Non Abrasive, Reduced Noise, Wear Resistant, Good Machinability
Fine weave (less than 4 ounce/square yard) cotton fabric commonly called linen, combined with phenolic resin to provide better machining than NP310. NP320 should be used for smaller and more intricate shapes than NP310, when a finer surface finish is required. NP320 meets or exceeds the requirements of MIL-I-24768/15 and IEC-60893-4-PF CC 203.
Norplex-Micarta
Norplex-Micarta NP342
Polymer Name:
Phenolic Compound
Reinforcement Material:
Cotton
Physical Form:
Fabric, Sheets
Density:
1350.0 - 1350.0 kg/m³
Features:
Good Machinability, General Purpose, Non Abrasive, Reduced Noise, Cost Effective, Wear Resistant
Fine weave canvas phenolic material with fabric construction weight intermediate to NP310 and NP320. NP342 is designed for better machining than grade NP310 and lower cost than NP320. NP342 meets or exceeds the requirements of MIL-I-24768/16 and IEC-60893-4-PF CC 201.
Creative Global Services
CGSTAPE - 7258 (8 mil)
Polymer Name:
Polyamide (unspecified)
Physical Form:
Film
Features:
Good Toughness, Enhanced Physical Properties, Anti-Static, Dimensional Stability, Chemical Resistant, Metallizable, Thermally Conductive, Wide Temperature Operating Range, Heat Sealable, Corona Resistant, UL Listed, Good Electrical Properties
CGSTAPE - 7258 (8 mil) is a polyimide film, synthesized by polymerizing an aromatic dianhydride and an aromatic diamine. It possesses a unique combination of properties, including excellent electrical and physical properties over a wide range of temperatures.
Resin Systems
Resin Systems RS-4050
Polymer Name:
Epoxy Resins & Compounds
Physical Form:
Plates, Rods, Bars
Features:
Good Rigidity, Microwave Absorbing, Radio Frequency Absorbing
Density:
1551.24648 - 1551.24648 kg/m³
RS-4050 is a rigid epoxy based magnetic castable microwave absorbing material capable of continuous operation up to 350°F. This material is ideal for fabrication of low power loads, attenuators, ring chokes and other RF absorbing elements at microwave frequencies. RS-4050 can be supplied in custom cast configurations, standard stock shapes of plates, rods and bars, or in pourable kits.
Daikin Industries, Ltd.
Neoflon PCTFE DF-0075C1
Physical Form:
Film, Solid
Features:
Electrically Insulating, Odorless, Excellent Wetting Behaviour, Corona Treated, Moisture Barrier, Chemical Resistant, Excellent Moisture Resistance, Excellent Transparency Properties
Color:
White
Neoflon PCTFE DF-0075C1 is a white solid film, excelling in water vapor barrier, transparency, chemical resistance, and electrical insulation. With optimal moisture prevention and less than 1% haze for transparency, it resists acids, alkalis, and organics over time. Enhanced wetting behavior through corona treatment. Targeting electrical and electronics and printing and packaging markets, it's ideal for healthcare packaging, wire and cable insulation, and pharmaceutical packaging.
Daikin Industries, Ltd.
Neoflon PFA AF-0250
Polymer Name:
Perfluoroalkoxy Polymer (PFA)
Physical Form:
Film, Solid
Features:
High Performance, Odorless, Low Stretchability, Weldable, Very Good Heat Resistance, Chemical Resistant, Non-Flammable, Good Smoothness
Color:
White
Neoflon PFA AF-0250, available in a solid white film form, is meticulously crafted through melt extrusion with neoflon PFA material. This product's distinct molecular architecture blends carbon and fluorine atoms with the perfluoroalkoxyl group, ensuring exceptional heat resistance, chemical resilience, and nonflammability. Renowned for its nonadhesive nature, it seamlessly integrates fabricating capabilities like sealing, thermoforming, welding, and heat bonding. Catering to sectors such as automotive, electrical and electronics, aerospace, and transportation, it excels in applications like electrical components, printed circuit boards, and aircraft assemblies. Its specialized surface treatment further enhances compatibility with materials like adhesives, resins, and rubbers, amplifying its versatile utility across industries.
Cerex Advanced Fabrics, Inc
Technically Engineered Products N-Fusion™
Polymer Name:
Polyamide 66 (PA 66)
Chemical Family:
Polyamides
Fiber Type:
Polyamide
Physical Form:
Solid, Fabric
Features:
Uniform Distribution, Good UV Protection, Service Life Extension, Excellent Gloss Retention, UV Resistance, Good Surface Appearance, High Gloss
N-Fusion™ surfacing veils create advantages in manufacturing and the final product. N-Fusion™ delivers uniformity, no linting or loose fibers, and unmatched strength.
Resin Systems
Resin Systems RS-4500
Polymer Name:
Epoxy Resins & Compounds
Physical Form:
Plates, Rods, Bars
Features:
Good Rigidity, Microwave Absorbing, Radio Frequency Absorbing
Density:
3684.21039 - 3684.21039 kg/m³
RS-4500 is a rigid epoxy based magnetic castable microwave absorbing material capable of continuous operation up to 350°F. This material is ideal for fabrication of low power loads, attenuators, ring chokes and other RF absorbing elements at microwave frequencies. RS-4500 can be supplied in custom cast configurations, standard stock shapes of plates, rods and bars, or in pourable kits.
DuPont
Tedlar® TST20SG4
Polymer Name:
Polyvinyl Fluoride (PVF)
Physical Form:
Film
Features:
Corrosion Resistant, Photolytic Degradation Resistant, Long Term Protection, Durable, Heat Sealable, Good Surface Finish, Excellent Dielectric Properties, High Dielectric Strength, Good Processability, Microbe Resistant, Glossy Surface Aspects, Acid Resistant, Excellent Formability, Cleanable, Good Stain Resistance, Fatigue Resistant, Flame Resistant, Crack Resistant, Excellent Long Term Heat Aging Properties, Bacteria Resistant, Flexible, High Temperature Resistance, Good Printability, Solvent Resistant, Low VOC, Low Toxicity, Alkali Resistant, Sound Transmitting, Good Weather Stability, Good Elongation, Good Color Stability, Mildew Resistant, Chemical Resistant, High Gas Permeability, Excellent UV Stability
Tensile Modulus:
2100.0 - 2600.0 MPa
Color:
Custom
Tedlar® TST20SG4 is a protective film that helps extend the look and life of the design, even in the most extreme environments. From severe weather to harsh chemicals, the protective film provides long-term durability and performance. The protective film can easily be applied to a range of surfaces, providing the flexibility to design your way and the surface performance to keep it that way.
Creative Global Services
CGSTAPE - 7258 (2 mil)
Polymer Name:
Polyamide (unspecified)
Physical Form:
Film
Features:
Good Toughness, Enhanced Physical Properties, Anti-Static, Dimensional Stability, Chemical Resistant, Metallizable, Thermally Conductive, Wide Temperature Operating Range, Heat Sealable, Corona Resistant, UL Listed, Good Electrical Properties
CGSTAPE - 7258 (2 mil) is a polyimide film, synthesized by polymerizing an aromatic dianhydride and an aromatic diamine. It possesses a unique combination of properties, including excellent electrical and physical properties over a wide range of temperatures.
Pacur
Pacur® PETG FLEX
Polymer Name:
Polyethylene Terephthalate Glycol (PETG)
Physical Form:
Sheets
Features:
Radiation Sterilizable, Cost Effective, Stress Whitening Resistant, Low Shrinkage, Recyclable, High Impact Resistance, Good Toughness, Notch Absorbing, E-Beam Sterilizable, Good Printability, Plasma Gas Sterilizable, Puncture Resistant, Ethylene Oxide Sterilizable, Fast Cycle Times, Dimensional Stability, Chemical Resistant
Density:
1270.0 - 1270.0 kg/m³
Tensile Modulus:
1900.0 - 1900.0 MPa
Pacur® PETG FLEX is engineered for use in 0.003” to 0.009” gage applications and is extruded from PETG copolyester resin. PETG FLEX is an exceptionally tough material making it ideal for label and thermoforming applications.
Norplex-Micarta
Norplex-Micarta RT628
Polymer Name:
Phenolic Compound
Physical Form:
Tube
Density:
1220.0 - 1220.0 kg/m³
Features:
Low Moisture Absorption, Good Machinability, Dimensional Stability
Grade RT628 is an improved machining grade meeting NEMA XX for tubes. It has low moisture absorption and good dimensional stability. Typical applications are as a replacement for RT629 where improved machining characteristics are needed. The primary application is in transformers. Certification to IEC standard is pending.
ThermHex Waben GmbH
ThermHex Waben GmbH THPP80-GC340
Physical Form:
Sandwich Panel
Polymer Name:
Polypropylene (unspecified)
Core Type:
Thermoplastic Honeycomb
Daikin Industries, Ltd.
Neoflon FEP NF-0250
Polymer Name:
Perfluoroethylene Propylene Copolymer (FEP)
Physical Form:
Film, Solid
Features:
Odorless, Low Stretchability, Weldable, Very Good Heat Resistance, Chemical Resistant, Non-Flammable, Good Smoothness, Excellent Transparency Properties
Color:
White
Neoflon FEP NF-0250 is a white solid film crafted through melt extrusion using neoflon FEP material. Formulated with carbon and fluorine atoms, it offers remarkable heat resistance, chemical durability, and non-flammability. This film's attributes include excellent transparency, smoothness, and minimal stretchability, facilitating processes such as heat sealing, thermoforming, welding, and heat bonding. Additionally, its unique surface characteristics allow for adherence to materials like adhesives and resins. Serving diverse markets including automotive, electrical and electronics, aerospace, and transportation, it finds applications from printed circuit boards and wire and cable insulation to aircraft components.
DuPont
Tedlar® TTR10SG3
Polymer Name:
Polyvinyl Fluoride (PVF)
Physical Form:
Film
Features:
Corrosion Resistant, Photolytic Degradation Resistant, Long Term Protection, Durable, Heat Sealable, Good Surface Finish, Excellent Dielectric Properties, High Dielectric Strength, Good Processability, Microbe Resistant, Glossy Surface Aspects, Acid Resistant, Excellent Formability, Cleanable, Good Stain Resistance, Fatigue Resistant, Flame Resistant, Crack Resistant, Excellent Long Term Heat Aging Properties, Bacteria Resistant, Flexible, High Temperature Resistance, Good Printability, Solvent Resistant, Low VOC, Low Toxicity, Alkali Resistant, Sound Transmitting, Good Weather Stability, Good Elongation, Good Color Stability, Mildew Resistant, Chemical Resistant, High Gas Permeability, Excellent UV Stability
Tensile Modulus:
2100.0 - 2600.0 MPa
Color:
Transparent
Tedlar® TTR10SG3 is a protective film that helps extend the look and life of the design, even in the most extreme environments. From severe weather to harsh chemicals, the protective film provides long-term durability and performance. The protective film can easily be applied to a range of surfaces, providing the flexibility to design your way and the surface performance to keep it that way.
DuPont
Tedlar® TCW20BE3
Polymer Name:
Polyvinyl Fluoride (PVF)
Physical Form:
Film
Features:
Corrosion Resistant, Photolytic Degradation Resistant, Long Term Protection, Durable, Heat Sealable, Good Surface Finish, Excellent Dielectric Properties, High Dielectric Strength, Good Processability, Microbe Resistant, Acid Resistant, Excellent Formability, Cleanable, Good Surface Gloss, Good Stain Resistance, Fatigue Resistant, Flame Resistant, Crack Resistant, Excellent Long Term Heat Aging Properties, Bacteria Resistant, Flexible, High Temperature Resistance, Good Printability, Solvent Resistant, Low VOC, Low Toxicity, Alkali Resistant, Sound Transmitting, Good Weather Stability, Good Elongation, Good Color Stability, Mildew Resistant, Chemical Resistant, High Gas Permeability, Excellent UV Stability
Tensile Modulus:
2100.0 - 2600.0 MPa
Color:
Custom
Tedlar® TCW20BE3 is a protective film that helps extend the look and life of the design, even in the most extreme environments. It provides long-term durability and performance, withstanding severe weather and harsh chemicals. Tedlar® protective film can be easily applied to a range of surfaces, offering design flexibility and reliable surface performance.
DuPont
Tedlar® TTR10BM3
Polymer Name:
Polyvinyl Fluoride (PVF)
Physical Form:
Film
Features:
Corrosion Resistant, Photolytic Degradation Resistant, Long Term Protection, Durable, Heat Sealable, Good Surface Finish, Excellent Dielectric Properties, High Dielectric Strength, Good Processability, Microbe Resistant, Acid Resistant, Excellent Formability, Good Abrasion Resistance, Cleanable, Good Stain Resistance, Fatigue Resistant, Excellent Salt Spray Resistance, Flame Resistant, Crack Resistant, Excellent Long Term Heat Aging Properties, Bacteria Resistant, Flexible, Medium Gloss, High Temperature Resistance, Good Printability, Solvent Resistant, Low VOC, Low Toxicity, Alkali Resistant, Sound Transmitting, Good Weather Stability, Good Elongation, Good Color Stability, Mildew Resistant, Chemical Resistant, High Gas Permeability, Excellent UV Stability
Tensile Modulus:
2100.0 - 2600.0 MPa
Color:
Transparent
Tedlar® TTR10BM3 is a protective film that helps extend the look and life of the design, even in the most extreme environments. From severe weather to harsh chemicals, the protective film provides long-term durability and performance. The protective film can easily be applied to a range of surfaces, providing the flexibility to design your way and the surface performance to keep it that way.
Show
36
of 1,842 results
Go to page
1
2
3
4
5
6
7
8
9
10