Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Industries
Packaging
Product Families
View All
Nonwovens
Industrial
Films
Consumer
Compounding
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde for Suppliers
Knowde
Ready-to-Use Products
Fluids & Lubricants
Products in Fluids & Lubricants
2,118 Products found in Fluids & Lubricants
Browse
Applications
Show All 5 Categories
Filters
Suppliers
Applications
Product Type
Application Area
Compatible Substrates & Surfaces
Chemical Family
Products
Brands
Suppliers
Formulations
Documents
Relevance
Shrieve Chemical Company
ZEROL® 350
Product Type:
Refrigeration Oils
Application Area:
Pump, Compressors
Features:
High Temperature Strength, Good Stability, Excellent Lubricity, Cost Effective, Excellent Miscibility, Good Thermal Stability, Low Volatility
Chemical Family:
Alkyl Benzenes
ZEROL® 350 lubricant range is based on synthetic Alkylbenzene (AB) and has been developed for use in refrigeration, heat pumps and air conditioning compressors. The miscibility of ZEROL lubricants with hydrofluorocarbon type refrigerants is excellent. Their low floc point, antifoaming properties and good stability at high temperature provides optimum lubrication even under the most severe conditions.
EpoxySet Inc.
EpoxySet Inc. STG-44
Product Type:
Conductive Grease
Application Area:
Rectifiers, Amplifiers, TV Sets, Coils, Relays
Features:
Good Thermal Conductivity, Low Vent Bleed, Soft, Good Flow, Thermally Conductive, Low Flow
Chemical Family:
Silicones
STG-44 is a non-reactive, Silicone, Thermally Conductive Grease with a high thermal conductivity and low thermal resistance with a soft, non-flowable consistency. This product is formulated with specialty binding agents to achieve lowest amount of bleed and evaporations. It is designed for applications where a silicone thermal interface material is required and where the device may later need to be easily removed from the heat sink. This compound is ideally suited for use in thin cross-sectional thicknesses down to ≤1 mil.
AI Technology
COOL GREASE® CGR 7559 LB
Applications:
Equipment & Parts, Automotive Electronics, Devices & Assemblies
Product Families:
Greases, Fluids & Lubricants
EpoxySet Inc.
EpoxySet Inc. HTG-71
Product Type:
Grease
Application Area:
Semiconductors
Features:
High Temperature Resistance, Improved Heat Transfer Efficiency, Good Thermal Conductivity, Filled, Low Vent Bleed, Long Term Protection, High Temperature Strength, Good Stability
HTG-71 is a high temperature resistance thermal grease,, heavily filled with heat conductive metal oxides. This combination promotes high thermal conductivity, low bleed and high-temperature stability. These compounds resist changes in consistency at temperatures up to 300°C, maintaining a positive heat sink seal to improve heat transfer from the electronic device to the heat sink or chassis, thereby, increasing the overall efficiency of the device.
Coolant Control
Pandora 10
Ready to Use Product Type:
Oil
Application Area:
Gears, Hydraulic Pumps, Bearings, Seals, Spindles
Compatible Substrates & Surfaces:
Elastomers & Rubbers
Features:
Oxidation Resistant, Corrosion Resistant, Cost Effective, Deposit Prevention, High Reliability, Consistent High Quality, Good Thermal Stability, High Hydrolytic Stability, Low Viscosity, Excellent Lubricity, Easy Product Filterability, Service Life Extension, High Thermo-Oxidative Stability
Pandora 10, formulated from select high-quality, low viscosity base oils and additives imparting excellent resistance to oxidation and corrosion, were developed specifically for the lubrication of high-speed and precision machine tool spindle bearings. They can also be used in some critical low pressure hydraulic and circulation systems where the appropriate viscosity grade is selected.
Monroe Fluid Technology
ASTRO-CUT A
Application Area:
Drilling Applications, Tapping Operations, Sawing Operations, Grinding Applications, Machining Operations, Milling Operations, Metalworking Equipment, Turning Operations
Compatible Substrates & Surfaces:
Iron, Metal
Features:
Good Hard Water Stability, Corrosion Resistant, Long Term Protection, Heavy Duty
Metalworking Fluid Type:
Soluble Oil
ASTRO-CUT A is a medium-to-heavy-duty, biostable soluble oil concentrate containing approximately 70% mineral oil. It was designed to be extended with water for the machining and grinding of virtually all metals except magnesium. This product is formulated without chlorine and has an amber liquid appearance.
GS-Caltex
Kixx Gear EP S ISO VG 32
Ready to Use Product Type:
Oil
Application Area:
Gears, Wind Turbine Gear, Gearboxes
Features:
Wear Resistant, Extreme Pressure Performance, Corrosion Resistant, Friction Reduction, Excellent Lubricity, Service Life Extension, Heavy Duty, Low Energy Consumption
Kixx Gear EP S is PAO based advanced synthetic heavy duty industrial gear oil. It offers outstanding lubrication under severe operating conditions, help reducing friction and provides longer service life. High resistance to micro-pitting for optimal gear protection.
Coolant Control
Synthetic EP 150
Product Type:
Oil
Application Area:
Bearings, Conveyor Roller Bearings, Hypoid Gear, Gears
Compatible Substrates & Surfaces:
Metal
Features:
High Thermo-Oxidative Stability, High Film Strength, Good Thermal Stability, Wear Resistant, Friction Reduction, Non-Foaming, High Loading Absorption Capability, Extreme Pressure Performance, Service Life Extension, Corrosion Resistant
Synthetic EP 150 of synthetic industrial EP gear lubricants is specifically formulated to protect moderate to heavily loaded industrial gears and bearings. It provide excellent anti-wear and load carrying capability as well as strong rust inhibition and demulsibility performance. Synthetic EP 150 meets or exceeds the requirements of the industry standard U.S. Steel 224 and AGMA 250.04 EP gear lubricant specifications.
Coolant Control
Hercules EP 5
Application Area:
Bearings, Seals, Gears
Features:
Temperature Resistance, Heat Resistance, High Thermo-Oxidative Stability, Excellent Long Term Heat Aging Properties, Extreme Pressure Performance, Corrosion Resistant, Wear Resistant, High Strength, Non-Foaming
Hercules EP 5 is an extreme pressure industrial gear oil fulfills the requirements of DIN 51517-3 for CLP type gear oils and U.S. Steel 224 performance. Hercules EP 5 offers good wear protection, safety against scuffing, aging resistance and a high thermal endurance. In addition, the product behave neutral towards conventional seals and bearing metals.
USI Chemical America,LLC
USI Chemical USi-PDMS 350
INCI Name:
Dimethicone
Chemical Family:
Silicones, Siloxanes
Functions:
Lubricant, Defoamer, Film Former
Labeling Claims:
Clean at Sephora, Credo Clean Standard, Ulta Beauty's Conscious Beauty
Synonyms:
Hexadecanoic Acid
USI Chemical USi-PDMS 350 is a special product which has excellent physical and chemical properties.
Coolant Control
Athena 220
Ready to Use Product Type:
Hydraulic Oils
Application Area:
Foam Fire Suppression, Gears, Bearings, Seals
Compatible Substrates & Surfaces:
Yellow Metals, Iron, Metal, Silicone, Elastomers & Rubbers
Features:
Service Life Extension, High Thermo-Oxidative Stability, Wear Resistant, Oxidation Resistant, Sludge Build-up Prevention, Corrosion Resistant, Cost Effective, Deposit Prevention, High Reliability, High Hydrolytic Stability, Excellent Lubricity, Easy Product Filterability
Athena 220 is a anti-wear hydraulic oils formulated with highly refined paraffinic base oils. It provides excellent anti-wear protection, oxidation and corrosion inhibition as well as foam and aeration suppression. It have excellent demulsibility characteristics.
Monroe Fluid Technology
ASTRO-CUT BCL
Application Area:
Metalworking Equipment, Turning Operations, Sawing Operations, Grinding Applications, Machining Operations, Drilling Applications, Tapping Operations, Milling Operations
Features:
Excellent Lubricity, General Purpose
Metalworking Fluid Type:
Semi-Synthetic
ASTRO-CUT BCL is a heavy-duty, biostable, semi-synthetic, general-purpose metalworking coolant containing approximately 20% mineral oil. This product, when diluted with water, forms a translucent amber emulsion that offers excellent workpiece visibility, good lubricity, and superior cooling. It is designed for the machining and grinding of virtually all metals, except magnesium, and contains chlorine as an extreme pressure additive for greater lubricity.
Monroe Fluid Technology
ASTRO-CUT HIGH PRESSURE
Application Area:
Metalworking Equipment, Turning Operations, Sawing Operations, Grinding Applications, Machining Operations, Drilling Applications, Tapping Operations, Milling Operations
Features:
Excellent Lubricity, Good Hard Water Stability, Extreme Pressure Performance
Metalworking Fluid Type:
Semi-Synthetic
ASTRO-CUT HIGH PRESSURE is a biostable, semi-synthetic, high-pressure metalworking coolant containing approximately 15% mineral oil. This product has exceptional foam control, hard water stability, and tramp oil rejection while providing outstanding lubricity for machining and grinding. It is compatible with virtually all metals except magnesium and is formulated without the use of chlorine.
MG Chemicals
MG Chemicals 8463 - Silver Conductive Grease
Ready to Use Product Type:
Conductive Grease, Grease
Application Area:
Bearings, Electrical Components, Slip Rings, Conveyor Roller Bearings
Features:
Corrosion Resistant, Friction Reduction, Anti-Static, Electrically Conductive, Odorless, Anti-Wear Properties, Excellent Lubricity, Moisture Resistant
Chemical Family:
Silver & Silver Compounds
8463 is a silver-filled electrically conductive grease. It greatly improves electrical and thermal connections under screw-type pressure. It lubricates, reduces contact resistance, repels moisture, inhibits corrosion, and prevents static build-up. Use 8463 when you want a lubricating grease that provides superior electrical contact and environmental protection. It is excellent for ground connections, rotating connections, rotary switches, variable capacitors, roller inductors, roller bearings, slip rings, slide connectors and potentiometers.
United-Guardian, Inc.
Lubrajel® MG
Ready-to-Use Product Type:
Lubricant
Application Area:
Medical Devices
Lubrajel MG is a proprietary hydrojel formulation that was developed in the early 1970's as a non-drying, water-soluble lubricant for the medical industry. Lubrajel MG has been marketed since its development in 1973 as a medical lubricant. It has been used as a general and instrument lubricant for use during physical exams, and applied to catheters, thermometers and a host of other instruments to aid in use and patient comfort.
Monroe Fluid Technology
ASTRO-CUT MICRO XL
Application Area:
Drilling Applications, Tools, Tapping Operations, Aerospace Applications, Sawing Operations, Grinding Applications, Machining Operations, Milling Operations, Metalworking Equipment, Turning Operations
Compatible Substrates & Surfaces:
Metal, Aluminum
Features:
Corrosion Resistant, Low Foaming, Increases Foam Stability, Extreme Pressure Performance, Heavy Duty, Excellent Lubricity
ASTRO-CUT MICRO XL is a heavy-duty, mineral oil based, biostable, micro-emulsion concentrate designed specifically to address the challenges of machining and grinding aluminum and aluminum alloys, although it may be used to machine virtually all metals except magnesium. This chlorine-free formulation is especially suited for aerospace and other applications which restrict the use of chlorine. It has exceptional foam control for high-pressure operations and is designed using raw materials that have the ability to resist extreme biological degradation, thus providing a very long sump life in a properly maintained machine tool.
Coolant Control
Stearocling 1000S
Ready to Use Product Type:
Oil
Application Area:
Milling Operations, Shapers, Planers, Grinders, Boring Applications
Features:
Friction Reduction, Consistent Performance, Improved Stick-Slip Response, Extreme Pressure Performance, Anti Dripping, Excellent Lubricity, Good Sliding Properties, High Viscosity Index, Wear Resistant, Good Stability
Stearocling 1000S Oils is formulated for the sliding ways of machine tools. It is formulated with high viscosity index base stocks combined with special extreme pressure friction modifiers that yield extremely low values in Cincinnati Milacron’s stick-slip test. As a result these oils are more stable to viscosity fluctuations and are able to overcome the slip-stick commonly associated with slow moving parts. Stearocling Way Oils also contain a package that eliminates the possibility of contamination through emulsification between the coolant and the way lube.
Monroe Fluid Technology
ASTRO-CUT HP XBP
Application Area:
Metalworking Equipment, Turning Operations, Sawing Operations, Grinding Applications, Machining Operations, Drilling Applications, Tapping Operations, Milling Operations
Compatible Substrates & Surfaces:
Metal
Features:
Excellent Lubricity, Good Hard Water Stability, Extreme Pressure Performance
Metalworking Fluid Type:
Semi-Synthetic
ASTRO-CUT HP XBP is a biostable, semi-synthetic, high-pressure, metalworking coolant containing approximately 15% mineral oil. This product has exceptional foam control, hard water stability, and tramp oil rejection while providing outstanding lubricity for machining and grinding. It is compatible with virtually all metals except magnesium and is formulated without the use of chlorine, phenols, nitrites, or DCHA.
USI Chemical America,LLC
USI Chemical USi-PDMS 10000
INCI Name:
Dimethicone
Functions:
Lubricant, Defoamer, Film Former
Chemical Family:
Silicones, Siloxanes
Labeling Claims:
Clean at Sephora, Credo Clean Standard, Ulta Beauty's Conscious Beauty
Synonyms:
Hexadecanoic Acid
USI Chemical USi-PDMS 10000 is a special product which has excellent physical and chemical properties.
Shrieve Chemical Company
ZEROL® PAG 150
Product Type:
Lubricant
Application Area:
Compressors, Air Conditioners
Features:
High Hydrolytic Stability, Excellent Lubricity, Cost Effective, Excellent Miscibility, High Thermo-Oxidative Stability, Good Thermal Stability, Wear Resistant, High Efficiency, Wide Temperature Operating Range, Friction Reduction, Chemical Resistant, Extreme Pressure Performance, Corrosion Resistant, High Viscosity Index
Chemical Family:
Polyalkylene Glycols (PAG), Polyglycols
ZEROL® PAG 150 are fully formulated polyalkylene glycol lubricants designed specifically for application with R-134a in MAC systems. Shrieve ZEROL® PAG 150 are produced in a range of ISO viscosity grades of 46, 100 and 150, in accordance with the typical requirements for most system designs.
Coolant Control
Hercules EP 6
Application Area:
Bearings, Seals, Gears
Features:
Temperature Resistance, Heat Resistance, High Thermo-Oxidative Stability, Excellent Long Term Heat Aging Properties, Extreme Pressure Performance, Corrosion Resistant, Wear Resistant, High Strength, Non-Foaming
Hercules EP 6 is an extreme pressure industrial gear oil fulfills the requirements of DIN 51517-3 for CLP type gear oils and U.S. Steel 224 performance. Hercules EP 6 offers good wear protection, safety against scuffing, aging resistance and a high thermal endurance. In addition, the product behave neutral towards conventional seals and bearing metals.
Calumet
Calumet HyperTech® 1000 G3
Product Type:
Industrial Lubricants, Oil
Application Area:
Compressors
Compatible Substrates & Surfaces:
Metal
Features:
Excellent Dry Film Stability, Wear Resistant, Low Friction, Corrosion Resistant
Chemical Family:
Polyolefins, Polyethylenes
AI Technology
COOL SILVER™ G5
Applications:
Consumer Electronics, Appliances & Electronics, Devices & Assemblies
Product Families:
Greases, Fluids & Lubricants
COOL SILVER™ G5 is an improved version of COOL-SILVER™ G3 and G4. It is a non-curing, non-silicone, thermal interface modified silver-filled grease that is not electrically conductive in bulk. The non-curing COOL SILVER™ G5 is by far the lowest thermal resistance grease that is not electrically conductive when compared with the best of the silver and diamond greases. It is designed specifically for high-power devices requiring less than 0.0015 °C-in²/watt thermal resistance (0.001 inch interface layer). COOL SILVER™ G5 will become a slightly more viscous after dispensing.It will remain as a thermally conductive interface medium with non-electrically conductive properties at all time. Temperatures greater than 100°C, will cause grease to gel.
Coolant Control
Poseidon 68
Ready to Use Product Type:
Oil
Application Area:
Bearings, Seals, Turbines, Pump, Gears, Foam Fire Suppression
Compatible Substrates & Surfaces:
Silicone, Elastomers & Rubbers, Yellow Metals, Iron, Brass, Metal, Steel
Features:
Extreme Pressure Performance, Good Thermal Stability, High Hydrolytic Stability, Excellent Lubricity, Easy Product Filterability, Service Life Extension, High Thermo-Oxidative Stability, Wear Resistant, Oxidation Resistant, Sludge Build-up Prevention, Corrosion Resistant, Cost Effective, Deposit Prevention, High Reliability
Poseidon 68 is a of rust and oxidation inhibited oils formulated with highly refined paraffinic base oils. It provides excellent oxidation and corrosion inhibition as well as foam and aeration suppression. It has excellent demulsibility characteristics.
Coolant Control
Athena 22
Ready to Use Product Type:
Hydraulic Oils
Application Area:
Foam Fire Suppression, Gears, Bearings, Seals
Compatible Substrates & Surfaces:
Yellow Metals, Iron, Metal, Silicone, Elastomers & Rubbers
Features:
Service Life Extension, High Thermo-Oxidative Stability, Wear Resistant, Oxidation Resistant, Sludge Build-up Prevention, Corrosion Resistant, Cost Effective, Deposit Prevention, High Reliability, High Hydrolytic Stability, Excellent Lubricity, Easy Product Filterability
Athena 22 is a anti-wear hydraulic oils formulated with highly refined paraffinic base oils. It provides excellent anti-wear protection, oxidation and corrosion inhibition as well as foam and aeration suppression. It have excellent demulsibility characteristics.
EpoxySet Inc.
EpoxySet Inc. HTG-72TC
Product Type:
Grease
Application Area:
Semiconductors
Features:
High Temperature Resistance, Improved Heat Transfer Efficiency, Good Thermal Conductivity, Filled, Low Vent Bleed, Long Term Protection, High Temperature Strength, Good Stability
HTG-72TC is our highest temperature resistance thermal grease along with very high thermal conductivity. It is a heavily filled system with heat conductive metal oxides. This combination promotes high thermal conductivity, low bleed and high-temperature stability. These compounds resist changes in consistency at temperatures up to 360°C, maintaining a positive heat sink seal to improve heat transfer from the electronic device to the heat sink or chassis, thereby, increasing the overall efficiency of the device.
Coolant Control
Synthetic EP 68
Product Type:
Oil
Application Area:
Bearings, Conveyor Roller Bearings, Hypoid Gear, Gears
Compatible Substrates & Surfaces:
Metal
Features:
High Thermo-Oxidative Stability, High Film Strength, Good Thermal Stability, Wear Resistant, Friction Reduction, Non-Foaming, High Loading Absorption Capability, Extreme Pressure Performance, Service Life Extension, Corrosion Resistant
Synthetic EP 68 of synthetic industrial EP gear lubricants is specifically formulated to protect moderate to heavily loaded industrial gears and bearings. It provide excellent anti-wear and load carrying capability as well as strong rust inhibition and demulsibility performance. Synthetic EP 68 meets or exceeds the requirements of the industry standard U.S. Steel 224 and AGMA 250.04 EP gear lubricant specifications.
Coolant Control
Olympus 32
Ready to Use Product Type:
Hydraulic Oils, Oil
Application Area:
Gears, Foam Fire Suppression, Bearings, Seals
Compatible Substrates & Surfaces:
Elastomers & Rubbers, Yellow Metals, Iron, Metal
Features:
High Hydrolytic Stability, Excellent Demulsibility, Excellent Lubricity, Easy Product Filterability, Service Life Extension, High Thermo-Oxidative Stability, Wear Resistant, Oxidation Resistant, Sludge Build-up Prevention, Corrosion Resistant, High Temperature Performance, Cost Effective, Deposit Prevention, High Reliability, Low Temperature Performance
Olympus 32 is a anti-wear hydraulic oils formulated with polyalphaolephin synthetic oils. It provides excellent anti-wear protection, oxidation and corrosion inhibition as well as foam and aeration suppression. It has excellent demulsibility characteristics. It is formulated to provide outstanding low- and high-temperature performance and equipment protection up to three times longer than comparable conventional products.
Coolant Control
Orion 7126
Product Type:
Metalworking Fluids, Fluid, Coolant
Application Area:
Drilling Applications, Cutting Tools, Machining Operations
Compatible Substrates & Surfaces:
Iron, Steel, Titanium, Metal, Aluminum
Features:
Excellent Lubricity, Good Hard Water Stability, Corrosion Resistant, Non-Foaming, Heavy Duty, Service Life Extension, Low Foaming
Orion 7126 is a moderate pH fluid developed for the machining of low and high alloy steels, aluminum alloys, Inconel, hastelloy, and titanium. The unique proprietary lubricants in Orion 7126 were designed for high speeds and feed rates and provides extremely high lubricity in a variety of aluminum machining operations. This oil-rejecting fluid outperforms conventional coolants in difficult operations such as tapping and gun drilling. Orion 7126 provides excellent bimetallic corrosion protection to keep parts and machine tools free from in-process rust. In hard or soft water, Orion 7126 forms a stable solution that will not foam. Orion 7126 is a clean fluid that runs with trouble-free dependability.
Shrieve Chemical Company
ZEROL® PAG 100
Product Type:
Lubricant
Application Area:
Compressors, Air Conditioners
Features:
High Hydrolytic Stability, Excellent Lubricity, Cost Effective, Excellent Miscibility, High Thermo-Oxidative Stability, Good Thermal Stability, Wear Resistant, High Efficiency, Wide Temperature Operating Range, Friction Reduction, Chemical Resistant, Extreme Pressure Performance, Corrosion Resistant, High Viscosity Index
Chemical Family:
Polyalkylene Glycols (PAG), Polyglycols
ZEROL® PAG 100 are fully formulated polyalkylene glycol lubricants designed specifically for application with R-134a in MAC systems. Shrieve ZEROL® PAG 100 are produced in a range of ISO viscosity grades of 46, 100 and 150, in accordance with the typical requirements for most system designs.
Monroe Fluid Technology
MONROE CUT 130 CS
Application Area:
Machining Operations, Broaching Applications, Turning Operations
Compatible Substrates & Surfaces:
Stainless Steel, Metal
Features:
High Performance, Low Odor, Low Smoke Emission, Excellent Lubricity
MONROE CUT 130 CS is a high-performance cutting oil designed for use in screw machines or other machining applications that require the use of neat cutting oils. It may be used on a variety of ferrous metals including stainless steel. This product is formulated using additives to provide a clean and efficient operating environment.
GS-Caltex
Kixx Circulating ISO VG 100
Ready to Use Product Type:
Circulating Oils
Application Area:
Bearings, Vane Pumps, Gears, Hydraulic Pumps, Rollers
Compatible Substrates & Surfaces:
Metal, Steel
Features:
Defoaming, Wear Resistant, Oxidation Resistant, Corrosion Resistant, Consistent High Quality
Kixx Circulating is a circulating oil formulated from high quality base stocks and a carefully balanced additive system. This provides excellent protection against wear for long bearing and gear life.
GS-Caltex
Kixx Turbine GT ISO VG 32
Ready to Use Product Type:
Oil
Application Area:
Turbines, Bearings, Machine Parts
Features:
Easy Product Filterability, Service Life Extension, Heavy Duty, Defoaming, High Performance, Oxidation Resistant, Good Air Release Properties, Corrosion Resistant, Good Thermal Stability
Kixx Turbine GT is a premium performance, specially inhibited turbine oil designed for the lubrication of modern, high severity, heavy-duty industrial gas turbines. Contains highly effective rust, oxidation and foam inhibitors and is formulated to provide good air release properties and good oxidation stability.
EpoxySet Inc.
EpoxySet Inc. STG-41
Product Type:
Conductive Grease
Application Area:
TV Sets, Electrical Components, Relays, Rectifiers, Amplifiers, Semiconductors, Coils, Power Modules
Features:
Soft, Low Flow, Good Thermal Conductivity, Thermally Conductive, Low Vent Bleed, Non-Toxic
Chemical Family:
Silicones
STG-41 is a non-reactive, Silicone, Thermally Conductive Grease with a high thermal conductivity and low thermal resistance with a soft, non-flowable consistency. This product is formulated with specialty binding agents to achieve lowest amount of bleed and evaporations. It is designed for applications where a silicone thermal interface material is required and where the device may later need to be easily removed from the heat sink. This compound is ideally suited for use in thin cross-sectional thicknesses down to ≤ 1 mil.
EpoxySet Inc.
EpoxySet Inc. TG-69
Product Type:
Thermal Grease
Application Area:
TV Sets, Coils, Relays, Rectifiers, Amplifiers, Semiconductors
Features:
Thermally Conductive, High Dielectric Strength, Improved Heat Transfer Efficiency, Good Thermal Conductivity, Low Vent Bleed, Low Creep, High Temperature Strength
TG-69 compound grease-like NON-SILICONE, NON- FLOWABLE material heavily filled with heat-conductive metal oxides. These combinations provide high thermal conductivity, low bleed and high temperature stability. TG-69 has been engineered to solve the problems of contamination and migration associated with silicone-based products. Unique polysynthetic-based thermal grease used to insure quick, efficient heat transfer and dissipation for the full operational life of your hardware.
Coolant Control
Hercules EP 4
Application Area:
Bearings, Seals, Gears
Features:
Temperature Resistance, Heat Resistance, High Thermo-Oxidative Stability, Excellent Long Term Heat Aging Properties, Extreme Pressure Performance, Corrosion Resistant, Wear Resistant, High Strength, Non-Foaming
Hercules EP 4 is an extreme pressure industrial gear oil fulfills the requirements of DIN 51517-3 for CLP type gear oils and U.S. Steel 224 performance. Hercules EP 4 offers good wear protection, safety against scuffing, aging resistance and a high thermal endurance. In addition, the product behave neutral towards conventional seals and bearing metals.
Show
36
of 2,118 results
Go to page
1
2
3
4
5
6
7
8
9
10