Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Industries
Packaging
Product Families
View All
Nonwovens
Industrial
Films
Consumer
Compounding
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde for Suppliers
Knowde
Ready-to-Use Products
Fluids & Lubricants
Products in Fluids & Lubricants
2,118 Products found in Fluids & Lubricants
Browse
Applications
Show All 5 Categories
Filters
Suppliers
Applications
Product Type
Application Area
Compatible Substrates & Surfaces
Chemical Family
Products
Brands
Suppliers
Formulations
Documents
Relevance
EpoxySet Inc.
EpoxySet Inc. STG-40
Product Type:
Conductive Grease
Application Area:
TV Sets, Electrical Components, Relays, Rectifiers, Amplifiers, Semiconductors, Coils, Power Modules
Features:
Soft, Low Flow, Good Thermal Conductivity, Thermally Conductive, Low Vent Bleed, Non-Toxic
Chemical Family:
Silicones
STG-40 is a non-reactive, Silicone, Thermally Conductive Grease with a high thermal conductivity and low thermal resistance with a soft, non-flowable consistency. This product is formulated with specialty binding agents to achieve lowest amount of bleed and evaporations. It is designed for applications where a silicone thermal interface material is required and where the device may later need to be easily removed from the heat sink. This compound is ideally suited for use in thin cross-sectional thicknesses down to ≤1 mil.
Shrieve Chemical Company
ZEROL® 500
Product Type:
Refrigeration Oils
Application Area:
Pump, Compressors
Features:
High Temperature Strength, Good Stability, Excellent Lubricity, Excellent Miscibility
Chemical Family:
Alkyl Benzenes
ZEROL® 500 lubricant range is based on synthetic Alkylbenzene (AB) and has been developed for use in refrigeration, heat pumps and air conditioning compressors. The miscibility of ZEROL lubricants with hydrofluorocarbon type refrigerants is excellent. Their low floc point, antifoaming properties and good stability at high temperature provides optimum lubrication even under the most severe conditions.
Calumet
CALTRAN™ 60-15
Product Type:
Oil
Application Area:
Power Transformers
Features:
Good Thermal Stability, Excellent Dielectric Properties, Oxidation Resistant, Electrically Insulating, Chemical Resistant
Chemical Family:
Naphthenics & Naphthalenes
CALTRAN™ 60-15 transformer oils have excellent dielectric properties, high thermal stability and good resistance to oxidation. CALTRAN transformer oils fully meet ASTM D3487 specifications for Type I and Type II mineral insulating oil in electrical apparatus.
Coolant Control
Cutrite 3900
Application Area:
Sump, Gears, Reaming, Drilling Applications, Tapping Operations, Boring Applications, Grinding Applications, Machining Operations
Compatible Substrates & Surfaces:
Metal, Aluminum, Iron, Titanium, Stainless Steel, Steel
Features:
High Reliability, Extreme Pressure Performance, Excellent Wetting Behaviour, Good Surface Finish, Heavy Duty, Service Life Extension, Highly Versatile, Drag Reduction, Good Stain Resistance, Low Foaming
Cutrite 3900 is a micro emulsion fluid engineered for machining and grinding a wide variety of metals including cast iron, steel, stainless steel and most aluminum alloys. It is ideally suited for manufacturing plants desiring a single fluid to perform well on a variety of metals and operations. The use of innovative technology allows Cutrite 3900 to provide excellent sump life while the reliable, low maintenance qualities make it an ideal choice for individual sumps and central systems applications.
Coolant Control
Vulgrind 7810B
Application Area:
Drilling Applications, Grinding Applications, Machining Operations, Gears
Compatible Substrates & Surfaces:
Iron, Titanium, Carbide, Painted Surfaces, Metal, Yellow Metals
Features:
Drag Reduction, Quick Cooling, Consistent High Quality, Low Foaming, Wear Resistant, High Performance, Excellent Wetting Behaviour, Good Thermal Stability, Excellent Lubricity
Vulgrind 7810B is a high performance precision grinding oil based on specially selected, thermally stable base oils. This allows Vulgrind 7810B to provide a consistent level of grinding performance as well as guaranteeing excellent wetting, lubrication and cooling.
Coolant Control
Cutrite 2100
Application Area:
Gears, Grinding Applications, Machining Operations
Compatible Substrates & Surfaces:
Metal, Aluminum, Iron
Features:
Good Surface Finish, Low Foaming, Service Life Extension, Bacteria Resistant, General Purpose, Good Hard Water Stability
Metalworking Fluid Type:
Semi-Synthetic
Cutrite 2100 is a semi-synthetic fluid for light to moderate duty machining and grinding of ferrous and non-ferrous alloys. Cutrite 2100’s emulsifier system is designed to remain stable even in very hard water and yet properly balanced to minimize foam in softer water. Cutrite 2100 is a clean product that provides dependable rancidity control when used in machining centers with individual sumps.
Monroe Fluid Technology
ASTRO-CUT HIGH PRESSURE
Application Area:
Metalworking Equipment, Turning Operations, Sawing Operations, Grinding Applications, Machining Operations, Drilling Applications, Tapping Operations, Milling Operations
Features:
Excellent Lubricity, Good Hard Water Stability, Extreme Pressure Performance
Metalworking Fluid Type:
Semi-Synthetic
ASTRO-CUT HIGH PRESSURE is a biostable, semi-synthetic, high-pressure metalworking coolant containing approximately 15% mineral oil. This product has exceptional foam control, hard water stability, and tramp oil rejection while providing outstanding lubricity for machining and grinding. It is compatible with virtually all metals except magnesium and is formulated without the use of chlorine.
Coolant Control
Orion 7126
Product Type:
Metalworking Fluids, Fluid, Coolant
Application Area:
Drilling Applications, Cutting Tools, Machining Operations
Compatible Substrates & Surfaces:
Iron, Steel, Titanium, Metal, Aluminum
Features:
Excellent Lubricity, Good Hard Water Stability, Corrosion Resistant, Non-Foaming, Heavy Duty, Service Life Extension, Low Foaming
Orion 7126 is a moderate pH fluid developed for the machining of low and high alloy steels, aluminum alloys, Inconel, hastelloy, and titanium. The unique proprietary lubricants in Orion 7126 were designed for high speeds and feed rates and provides extremely high lubricity in a variety of aluminum machining operations. This oil-rejecting fluid outperforms conventional coolants in difficult operations such as tapping and gun drilling. Orion 7126 provides excellent bimetallic corrosion protection to keep parts and machine tools free from in-process rust. In hard or soft water, Orion 7126 forms a stable solution that will not foam. Orion 7126 is a clean fluid that runs with trouble-free dependability.
Monroe Fluid Technology
ASTRO-CUT MICRO XL
Application Area:
Drilling Applications, Tools, Tapping Operations, Aerospace Applications, Sawing Operations, Grinding Applications, Machining Operations, Milling Operations, Metalworking Equipment, Turning Operations
Compatible Substrates & Surfaces:
Metal, Aluminum
Features:
Corrosion Resistant, Low Foaming, Increases Foam Stability, Extreme Pressure Performance, Heavy Duty, Excellent Lubricity
ASTRO-CUT MICRO XL is a heavy-duty, mineral oil based, biostable, micro-emulsion concentrate designed specifically to address the challenges of machining and grinding aluminum and aluminum alloys, although it may be used to machine virtually all metals except magnesium. This chlorine-free formulation is especially suited for aerospace and other applications which restrict the use of chlorine. It has exceptional foam control for high-pressure operations and is designed using raw materials that have the ability to resist extreme biological degradation, thus providing a very long sump life in a properly maintained machine tool.
Coolant Control
Athena 220
Ready to Use Product Type:
Hydraulic Oils
Application Area:
Foam Fire Suppression, Gears, Bearings, Seals
Compatible Substrates & Surfaces:
Yellow Metals, Iron, Metal, Silicone, Elastomers & Rubbers
Features:
Service Life Extension, High Thermo-Oxidative Stability, Wear Resistant, Oxidation Resistant, Sludge Build-up Prevention, Corrosion Resistant, Cost Effective, Deposit Prevention, High Reliability, High Hydrolytic Stability, Excellent Lubricity, Easy Product Filterability
Athena 220 is a anti-wear hydraulic oils formulated with highly refined paraffinic base oils. It provides excellent anti-wear protection, oxidation and corrosion inhibition as well as foam and aeration suppression. It have excellent demulsibility characteristics.
United-Guardian, Inc.
Lubrajel® MG
Ready-to-Use Product Type:
Lubricant
Application Area:
Medical Devices
Lubrajel MG is a proprietary hydrojel formulation that was developed in the early 1970's as a non-drying, water-soluble lubricant for the medical industry. Lubrajel MG has been marketed since its development in 1973 as a medical lubricant. It has been used as a general and instrument lubricant for use during physical exams, and applied to catheters, thermometers and a host of other instruments to aid in use and patient comfort.
MG Chemicals
MG Chemicals 8463 - Silver Conductive Grease
Ready to Use Product Type:
Conductive Grease, Grease
Application Area:
Bearings, Electrical Components, Slip Rings, Conveyor Roller Bearings
Features:
Corrosion Resistant, Friction Reduction, Anti-Static, Electrically Conductive, Odorless, Anti-Wear Properties, Excellent Lubricity, Moisture Resistant
Chemical Family:
Silver & Silver Compounds
8463 is a silver-filled electrically conductive grease. It greatly improves electrical and thermal connections under screw-type pressure. It lubricates, reduces contact resistance, repels moisture, inhibits corrosion, and prevents static build-up. Use 8463 when you want a lubricating grease that provides superior electrical contact and environmental protection. It is excellent for ground connections, rotating connections, rotary switches, variable capacitors, roller inductors, roller bearings, slip rings, slide connectors and potentiometers.
USI Chemical America,LLC
USI Chemical USi-PDMS 5000
INCI Name:
Dimethicone
Chemical Family:
Silicones, Siloxanes
Functions:
Lubricant, Defoamer, Film Former
Labeling Claims:
Clean at Sephora, Credo Clean Standard, Ulta Beauty's Conscious Beauty
Synonyms:
Hexadecanoic Acid
USI Chemical USi-PDMS 5000 is a special product which has excellent physical and chemical properties.
Shrieve Chemical Company
PROGILINE® AIR 8068
Applications:
Equipment & Parts, Chemical & Industrial Manufacturing
Product Families:
Lubricants & Oils, Fluids & Lubricants
AI Technology
COOL GREASE® CGR 7559 LB
Applications:
Equipment & Parts, Automotive Electronics, Devices & Assemblies
Product Families:
Greases, Fluids & Lubricants
EpoxySet Inc.
EpoxySet Inc. STG-44
Product Type:
Conductive Grease
Application Area:
Rectifiers, Amplifiers, TV Sets, Coils, Relays
Features:
Good Thermal Conductivity, Low Vent Bleed, Soft, Good Flow, Thermally Conductive, Low Flow
Chemical Family:
Silicones
STG-44 is a non-reactive, Silicone, Thermally Conductive Grease with a high thermal conductivity and low thermal resistance with a soft, non-flowable consistency. This product is formulated with specialty binding agents to achieve lowest amount of bleed and evaporations. It is designed for applications where a silicone thermal interface material is required and where the device may later need to be easily removed from the heat sink. This compound is ideally suited for use in thin cross-sectional thicknesses down to ≤1 mil.
EpoxySet Inc.
EpoxySet Inc. HTG-71
Product Type:
Grease
Application Area:
Semiconductors
Features:
High Temperature Resistance, Improved Heat Transfer Efficiency, Good Thermal Conductivity, Filled, Low Vent Bleed, Long Term Protection, High Temperature Strength, Good Stability
HTG-71 is a high temperature resistance thermal grease,, heavily filled with heat conductive metal oxides. This combination promotes high thermal conductivity, low bleed and high-temperature stability. These compounds resist changes in consistency at temperatures up to 300°C, maintaining a positive heat sink seal to improve heat transfer from the electronic device to the heat sink or chassis, thereby, increasing the overall efficiency of the device.
United-Guardian, Inc.
Lubrajel® RA
Applications:
Wound Care, Laboratory & Diagnostics, Medical Devices & Assemblies
Product Families:
Medical Grade Lubricants, Fluids & Lubricants
Lubrajel RA is a water-soluble lubricating liquid capable of terminal sterilization with 2.5 Megagrads (25 kGy) of gamma radiation. This low viscosity liquid is clear, colorless and virtually odorless. These characteristics remain intact even after irradiation.
EpoxySet Inc.
EpoxySet Inc. CTG-81
Product Type:
Conductive Grease
Application Area:
Diodes, Power Transistor, Semiconductors
Features:
Electrically Conductive, Thermally Conductive, Long Term Protection, Good Stability
CTG-81 is Non-Silicone; Non-curing, silver filled electrically and thermally conductive grease. It can be used as interfacial contact for electrical and thermal transfer for power devices. This material will not dry, harden or melt in normal industrial use and provides long term material stability.
Calumet
CALTRAN™ 60-30 C50B
Product Type:
Oil
Application Area:
Power Transformers
Features:
Good Thermal Stability, Excellent Dielectric Properties, Oxidation Resistant, Electrically Insulating, Service Life Extension, Corrosion Resistant, Chemical Resistant
Chemical Family:
Naphthenics & Naphthalenes
CALTRAN™ 60-30 C50B insulating oils are developed using high quality base stocks to deliver a product that provides excellent performance in electrical service. CALTRAN C50 insulating oils are designed and manufactured to provide cooling and insulating properties as well as promote resistance to oxidation and sludge formation.
Coolant Control
Synthetic EP 220
Product Type:
Oil
Application Area:
Bearings, Conveyor Roller Bearings, Hypoid Gear, Gears
Compatible Substrates & Surfaces:
Metal
Features:
High Thermo-Oxidative Stability, High Film Strength, Good Thermal Stability, Wear Resistant, Friction Reduction, Non-Foaming, High Loading Absorption Capability, Extreme Pressure Performance, Service Life Extension, Corrosion Resistant
Synthetic EP 220 of synthetic industrial EP gear lubricants is specifically formulated to protect moderate to heavily loaded industrial gears and bearings. It provide excellent anti-wear and load carrying capability as well as strong rust inhibition and demulsibility performance. Synthetic EP 220 meets or exceeds the requirements of the industry standard U.S. Steel 224 and AGMA 250.04 EP gear lubricant specifications.
Shrieve Chemical Company
ZEROL® RFL 150-X
Applications:
Equipment & Parts, Automotive Fluids & Lubricants, Lubricants & Functional Fluids
Product Families:
Lubricants & Oils, Fluids & Lubricants
Monroe Fluid Technology
ASTRO-EDM A
Application Area:
Electrode, Electrical Discharge Machining, Metalworking Equipment
Compatible Substrates & Surfaces:
Iron, Metal
Features:
Long Term Protection, High Flash Point, Rapid Particle Settling, Quick Cooling, Low Viscosity, Low Odor, Excellent Performance
ASTRO-EDM A is a low-odor, clear, colorless dielectric fluid designed to offer superior performance, precise cuts, and long life in a complete range of electrical discharge machining operations. Its low viscosity allows better flushing of electrode gaps and rapid particle settling.
Monroe Fluid Technology
MONROE DRAW 500 EP-EM
Application Area:
Drawing Operations, Blanking Application
Compatible Substrates & Surfaces:
Stainless Steel, Metal
Features:
Anti-Wipe Properties, Excellent Adherence, Stain Resistant, Corrosion Resistant
MONROE DRAW 500 EP-EM is a heavy-duty rinseable drawing oil. It has been formulated for use on difficult drawing and blanking operations and has excellent adherence and anti-wipe properties. This product is well-suited for fine blanking operations on ferrous and stainless steels. It performs extremely well on both ferrous and non-ferrous metals without staining or rusting.
Coolant Control
Synthetic EP 460
Product Type:
Oil
Application Area:
Bearings, Conveyor Roller Bearings, Hypoid Gear, Gears
Compatible Substrates & Surfaces:
Metal
Features:
High Thermo-Oxidative Stability, High Film Strength, Good Thermal Stability, Wear Resistant, Friction Reduction, Non-Foaming, High Loading Absorption Capability, Extreme Pressure Performance, Service Life Extension, Corrosion Resistant
Synthetic EP 460 of synthetic industrial EP gear lubricants is specifically formulated to protect moderate to heavily loaded industrial gears and bearings. It provide excellent anti-wear and load carrying capability as well as strong rust inhibition and demulsibility performance. Synthetic EP 460 meets or exceeds the requirements of the industry standard U.S. Steel 224 and AGMA 250.04 EP gear lubricant specifications.
VBASE Oil
VBASE® Hydro T-EL™
Ready to Use Product Type:
Oil
Application Area:
Hydro Power, Turbines
Compatible Substrates & Surfaces:
Metal, Steel
Features:
Corrosion Resistant, Biodegradable, Low Foaming, Low Coefficient of Friction, Low Wear, High Solvency, Wide Temperature Operating Range, Excellent Lubricity, Non-Toxic, Varnish Build-up Prevention, Service Life Extension, High Thermo-Oxidative Stability, High Viscosity Index, High Heat Capacity, High Performance
VBASE® Hydro T-EL™ is a fully formulated hydropower turbine oil. Hydro T-EL is formulated using premium fully saturated synthetic ester hybrid base oil and was designed as a high-performance hydropower turbine oil capable of meeting the EPA standards for Environmentally Acceptable Lubricants (EAL) according to the 2018 Vessel Incidental Discharge Act (VIDA).
Biosynthetic Technologies
PCMO Motor Oil 5W-20
Ready to Use Product Type:
Lubricant, Oil
Application Area:
Automotive Engine, Cams, Engine, Electric Motors, Trunk Piston Engine
Chemical Family:
Mixtures & Blends
SAE Viscosity Grade:
SAE 20, SAE 5W
Biosynthetic® Motor Oil 5W-20 is formulated using advanced additive technology and made from renewable base stocks to help protect your engine and the environment.
NICCA U.S.A. Inc.
RECALOFLOSSO® PT-06
Chemical Family:
Perfluoropolyethers (PFPE), Fluoropolymers
Product Type:
Fluid
Fluids & Lubricants Type:
Greases
RECALOFLOSSO® PT-06 is a medium to high-viscosity K-type PFPE base oil with a sharp molecular weight distribution. It can be used as a Perflouropolyether Base Oil for lubricants and greases.
Coolant Control
Orion 1065G
Product Type:
Metalworking Fluids, Fluid, Coolant, Cutting Oils
Application Area:
Drilling Applications, Grinding Applications, Machining Operations
Compatible Substrates & Surfaces:
Iron, Metal
Features:
Excellent Lubricity, Good Hard Water Stability, Corrosion Resistant, Non-Foaming, Heavy Duty, Service Life Extension, Good Stability, Low Foaming
Orion 1065 is our premier synthetic cutting and grinding fluid for ferrous alloys. The unique proprietary lubricants in Orion 1065 were designed for high speeds and feed rates and provides extremely high lubricity in a variety of ferrous machining operations. This oil-rejecting fluid outperforms conventional coolants in difficult operations such as gear hobbing and gun drilling. Orion 1065 provides excellent bimetallic corrosion protection to keep parts and machine tools free from in-process rust. In hard or soft water, Orion 1065 forms a stable solution that will not foam. Orion 1065 is a clean fluid that runs with trouble-free dependability.
Coolant Control
Vuldra 4915
Application Area:
Drawing Operations, Stamping, Fine Blanking Application
Compatible Substrates & Surfaces:
Carbon Steel, Stainless Steel, Metal
Features:
Galling Resistant, Good Extrusion Properties, Heavy Duty, Service Life Extension
Vuldra 4915 is a heavy duty oil formulated for extrusion, deep drawing, fine blanking and difficult stamping operations on stainless steel, low carbon steel and exotic alloys. Parts are left clean with no varnishing even under high heat operations.
Shrieve Chemical Company
PROGILINE® SHF 22
Applications:
Equipment & Parts, Chemical & Industrial Manufacturing
Product Families:
Lubricants & Oils, Fluids & Lubricants
PROGILINE® SHF 22 Synthetic Hydraulic Fluids are formulated with the highest quality synthetic base fluids, along with the latest technological advances in additive systems, to provide superior anti-wear, rust, corrosion, and extreme pressure production properties for all types of high-pressure hydraulic systems, to include, vain, piston, and gear pumps.
Coolant Control
Vuldra 6412
Application Area:
Drawing Operations, Stamping
Compatible Substrates & Surfaces:
Metal, Aluminum
Features:
Water Soluble, Extreme Pressure Performance, Good Surface Finish, Service Life Extension, Excellent Lubricity, Bacteria Resistant
Vuldra 6412 is a water soluble drawing and stamping fluid designed for use in a wide range of stamping and drawing applications including deep draws and light to heavy duty stamping and drawing operations. The unique combination of boundary lubrication and non-chlorinated extreme pressure additives provides excellent surface finishes even in the most demanding operations. Vuldra 6412 is a clean running product that is easily removed by both mildly alkaline and alkaline cleaners.
Shrieve Chemical Company
ZEROL® RFL 100-X
Applications:
Equipment & Parts, Automotive Fluids & Lubricants, Lubricants & Functional Fluids
Product Families:
Lubricants & Oils, Fluids & Lubricants
Coolant Control
Athena 150
Ready to Use Product Type:
Hydraulic Oils
Application Area:
Foam Fire Suppression, Gears, Bearings, Seals
Compatible Substrates & Surfaces:
Yellow Metals, Iron, Metal, Silicone, Elastomers & Rubbers
Features:
Service Life Extension, High Thermo-Oxidative Stability, Wear Resistant, Oxidation Resistant, Sludge Build-up Prevention, Corrosion Resistant, Cost Effective, Deposit Prevention, High Reliability, High Hydrolytic Stability, Excellent Lubricity, Easy Product Filterability
Athena 150 is a anti-wear hydraulic oils formulated with highly refined paraffinic base oils. It provides excellent anti-wear protection, oxidation and corrosion inhibition as well as foam and aeration suppression. It have excellent demulsibility characteristics.
Shrieve Chemical Company
PROGILINE® AIR 8032
Applications:
Equipment & Parts, Chemical & Industrial Manufacturing
Product Families:
Lubricants & Oils, Fluids & Lubricants
PROGILINE® AIR 8032 is a fully synthetic premium quality lubricant specifically designed to ensure rotary screw compressors maintain optimum performance at a full range of operating temperatures. PROGILINE® AIR 8032 are formulated with superior PAG and POE base stocks in combination with a state-of-the-art additive package. The formulation provides outstanding performance in cooling, anti-wear protection, thermal stability and anti-oxidative properties. The formulation is designed to ensure an absence of sludge, gum and coke formation. The expected product lifetime at typical air compressor operating conditions is 8000 hours.
Shrieve Chemical Company
PROGILINE® SHF 100
Applications:
Equipment & Parts, Chemical & Industrial Manufacturing
Product Families:
Lubricants & Oils, Fluids & Lubricants
PROGILINE® SHF 100 Synthetic Hydraulic Fluids are formulated with the highest quality synthetic base fluids, along with the latest technological advances in additive systems, to provide superior anti-wear, rust, corrosion, and extreme pressure production properties for all types of high-pressure hydraulic systems, to include, vain, piston, and gear pumps.
Show
36
of 2,118 results
Go to page
1
2
3
4
5
6
7
8
9
10