company tower banner
EpoxySet Inc. Company Logo

EpoxySet Inc. CTG-81

CTG-81 is Non-Silicone; Non-curing, silver filled electrically and thermally conductive grease. It can be used as interfacial contact for electrical and thermal transfer for power devices. This material will not dry, harden or melt in normal industrial use and provides long term material stability.

Product Type: Conductive Grease

Application Area: Diodes, Power Transistor, Semiconductors

Features: Electrically Conductive, Good Stability, Long Term Protection, Thermally Conductive

Technical Data Sheet
  • TypeDocument Name
View All Documents

Knowde Enhanced TDS

Identification & Functionality

Product Type

Features & Benefits

Labeling Claims

Applications & Uses

Industrial Usage

These materials are intended for industrial use only, and the practices of good housekeeping, safety and cleanliness hould be followed before, during and after use.

Product Applications

Non-silicone, silver filled thermal grease with Extremely high electrical and thermal conductivity.

Properties

Color
Physical Form
Typical Properties
ValueUnitsTest Method / Conditions
Specific Gravity3.1
ConsistencyPaste
Evaporation (at 200°C, 24 hrs) 0.4%wt
Maximum Continues Service Temperature200°C
Thermal Conductivity (at 25°C)7.2W/m °K
Thermal Resistance0.005°C-In/W
Electrical Resistivitymax. 0.01ohm-cm

Regulatory & Compliance

Certifications & Compliance

Safety & Health

Warning

Although the system contains low volatility materials, care should be taken in handling. Adequate ventilation of work place and ovens is essential. In case of skin contact, wash thoroughly with soap and water. For eyes, flush immediately with plenty of water for at least 10 minutes and seek medical attention.

Storage & Handling

Shelf Life
1 Year, 1 year
Shelf Life

The shelf life of these materials is greater than one year when stored in unopened containers at an average temperature of 25°C.