Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Industries
Packaging
Product Families
View All
Nonwovens
Industrial
Films
Consumer
Compounding
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde for Suppliers
Knowde
Plastics
Parts, Shapes & Films
Products results
1,837 Products found
Filters
Suppliers
Applications
Physical Form
Polymer Name
End Uses
Features
Products
Brands
Suppliers
Formulations
Documents
Relevance
Mitsubishi Chemical Group Corporation
Nylatron® SLG PA6
Polymer Name:
Polyamide 6 (PA 6)
Physical Form:
Plates, Rods
Features:
High Rigidity, Food Contact Acceptable, Lubricated, Heat Stabilized, Good Mechanical Properties, Low Coefficient of Friction, Wear Resistant, High Strength, Excellent Mechanical Strength, Self Lubricating, Excellent Toughness, Good Electrical Properties, Good Sliding Properties, Service Life Extension
Density:
1150.0 - 1150.0 kg/m³
Tensile Modulus:
3446.0 - 3446.0 MPa
Nylatron® SLG Polyamide PA6 oil-filled shapes are the perfect solution for industrial applications that require low coefficient of friction, high mechanical strength and rigidity, and outstanding wear resistance. Developed specifically for non-lubricated, highly loaded, and slowly moving parts, these shapes offer a number of benefits over conventional cast nylon grades.Features:Broadest size range availabilityExcellent wear resistanceGood mechanical and electrical propertiesIdeal balance of strength and toughnessInternally lubricated and heat stabilizedBenefits:Low coefficient of friction and sliding propertiesHigh mechanical strength and rigidityOutstanding wear resistanceLonger service life and lower maintenance costs compared to conventional cast nylon gradesApplications:Ideal for use in industrial environmentsSuitable for non-lubricated, highly loaded, and slowly moving parts such as gears, bearings, bushings, and wear pads.
Mitsubishi Chemical Group Corporation
Techtron® PSBG PPS
Polymer Name:
Polyphenylene Sulfide (PPS)
Physical Form:
Rods, Plates
Features:
Lubricated, Low Thermal Expansion, Dimensional Stability, Corrosion Resistant, Chemical Resistant, Wear Resistant, High Tolerance, Electrically Conductive
Density:
1520.0 - 1520.0 kg/m³
Tensile Modulus:
6340.64 - 6340.64 MPa
Color:
Black
Techtron® PSBG is a high-performance polymer that combines the excellent chemical and corrosion resistance of Polyphenylene Sulfide (PPS) with the added strength and durability of carbon fiber reinforcement. This compression-molded material is internally lubricated and designed to excel in wear applications where an electrically conductive material is required.Key features:Excellent wear resistance: internally lubricated and carbon fiber-reinforced, allowing it to withstand high loads and minimize wear and tearOutstanding dimensional stability: minimal moisture absorption and low coefficient of linear thermal expansion, making it easy to maintain tight tolerancesExtreme chemical and corrosion resistance: ideal for use in demanding environmentsLow coefficient of linear thermal expansion: making it suitable for applications where dimensional stability is criticalElectrically conductive: ideal for wear applications that require electrical conductivityBenefits:Improved performance and durability of components in demanding environmentsIncreased resistance to chemicals, corrosion and wearEnhanced precision and dimensional stabilityImproved electrical conductivityApplications:Bushings and bearings, lantern rings, and pump wear components in the oil and gas industryElectrical components as it is electrically conductiveAutomotive and aerospace components as it can withstand high temperatures.Wear-resistant components in general, as it is internally lubricated and reinforced with carbon fiberTechtron® PSBG is a versatile and reliable material that can help improve the performance and longevity of your products. It's available in a range of shapes and sizes, making it easy to incorporate into your designs.
Mitsubishi Chemical Group Corporation
Duratron® PI D7000
Polymer Name:
Polyimide (PI)
Physical Form:
Sheets, Tube, Rods
Features:
Cost Effective, Good Mechanical Properties, High Strength, High Tolerance, Light Weight, Excellent Toughness, Electrically Insulating, Thermally Insulating, Dimensional Stability, Chemical Resistant, Service Life Extension, High Temperature Resistance
Density:
1380.0 - 1380.0 kg/m³
Tensile Modulus:
3700.0 - 3700.0 MPa
Color:
Brown
Duratron® D7000 PI Polyimide shapes - a high-performance material ideal for demanding applications that require exceptional thermal resistance, low wear and friction, strength, and impact resistance. With superior electrical and thermal insulation properties, outstanding mechanical performance, great chemical resistance, and outstanding dimensional stability, Duratron® D7000 PI is an ideal solution for designs that reduce weight, extend service life, and reduce overall costs.Features:Superior electrical and thermal insulation propertiesOutstanding mechanical performanceGreat chemical resistanceHigh strength and toughnessOutstanding dimensional stabilityBenefits:Ideal for designs that reduce weightExtends service life before maintenance or replacementReduces overall costs by increasing process uptimeApplications:AerospaceTransportationIndustrialDuratron® D7000 PI is available in stock shapes and direct formed parts, perfect for smaller series and designs where tolerances and geometry of the end part require machining. The material is also available in Hot Compression Molded (HCM) shapes, providing designers with the greatest economy and flexibility.
Mitsubishi Chemical Group Corporation
Techtron® PSGF PPS
Polymer Name:
Polyphenylene Sulfide (PPS)
Physical Form:
Rods, Plates
Features:
Creep Resistant, Dimensional Stability, High Stiffness, Good Sliding Properties, High Tolerance
Density:
1660.0 - 1660.0 kg/m³
Tensile Modulus:
7250.0 - 7250.0 MPa
Color:
Black
Techtron® PSGF PPS is a high-performance polymer that combines the excellent chemical and corrosion resistance of Polyphenylene Sulfide (PPS) with the added strength and stiffness of glass fiber reinforcement. This compression-molded material is designed to excel in structural applications where dimensional stability and resistance to harsh environments are required.Key features:Extreme dimensional stability: minimal moisture absorption and low coefficient of linear thermal expansion, making it easy to maintain tight tolerances.Chemical and corrosion resistance: suitable for use in demanding environments and harsh chemicals.Glass fiber reinforced: increased strength and stiffness, ideal for structural componentsHigh temperature resistance: can withstand high temperatures and maintain stability.Benefits:Improved performance and durability of components in demanding environmentsIncreased resistance to chemicals, corrosion and wearEnhanced precision and dimensional stabilityImproved strength and stiffnessApplications:Structural components such as pump housings, valves, and compressors in the oil and gas industryAutomotive and aerospace components as it can withstand high temperatures.Industrial and chemical processing applications where chemical resistance and dimensional stability is needed.General structural components where increased strength and stiffness is neededTechtron® PSGF is a versatile and reliable material that can help improve the performance and longevity of your products. It's available in a range of shapes and sizes, making it easy to incorporate into your designs.
Mitsubishi Chemical Group Corporation
Fluorosint® 135 PTFE
Polymer Name:
Polytetrafluoroethylene (PTFE)
Physical Form:
Rods, Tube, Plates
Features:
High Performance, Good Mechanical Properties, High Stiffness, Low Coefficient of Friction, High Strength, High Tolerance, Anti-Wear Properties
Density:
1890.0 - 1890.0 kg/m³
Tensile Modulus:
1.238 - 1.238 MPa
Color:
Black
Fluorosint® 135 is an advanced polymer material that combines the excellent chemical resistance, low friction and high temperature properties of PTFE (polytetrafluoroethylene) with the added low coefficient of friction, strength, stiffness and high pressure velocity capabilities. This material is designed to excel in demanding applications where high performance and reliability are required.Key features:Low coefficient of friction: provides excellent wear and deformation resistanceHigh strength and stiffness: provides superior mechanical performance at elevated temperaturesPTFE base: provides excellent chemical resistance, low friction and high temperature propertiesStock shapes available: allows for easy incorporation into your designs and efficient productionHigh temperature resistance: able to maintain stability and strength in high temperature environments.Benefits:Low coefficient of friction, making it ideal for seals, bearings, and washer applicationsImproved strength and stiffness of components in demanding environments and high temperaturesIncreased resistance to wear and tear, impact and high temperaturesEnhanced performance and durability of your products in high temperature and chemical environmentsImproved reliability and safety in critical applications.Applications:Low friction seals, bearings and washer applicationsHigh-performance wear applications where extreme conditions are present such as high temperature, pressure and chemical exposureComponents that require high strength and stiffness, such as gears, bearing components, and bushings in high temperature environmentsIndustrial and manufacturing equipment where high strength and stiffness is needed, such as in high temperature environments and chemical processesComponents that need high chemical resistance, low friction, and high temperature properties such as valves, pumps, and heat exchangers.Fluorosint® 135 is a versatile and reliable material that can help improve the performance and longevity of your products. It's available in stock shapes as well as custom shapes, it allows for efficient production and the ability to create complex geometries. It's also important to mention that the temperature and chemical resistance can vary depending on the grade of PTFE used as well as other additives, always consult with the manufacturer for the exact properties of the final material.
Mitsubishi Chemical Group Corporation
Duratron® T4503 PAI
Polymer Name:
Polyamide-imide (PAI)
Physical Form:
Tube, Plates, Rods
Features:
High Strength, High Tolerance, Creep Resistant, Odorless, Low Thermal Expansion, Thermally Insulating, Dimensional Stability
Density:
1400.0 - 1400.0 kg/m³
Tensile Modulus:
3450.0 - 3450.0 MPa
Duratron® T4503 PAI Polyamide-imide is a compression molded material that offers exceptional electrical insulation properties and excellent dimensional stability. This grade is often selected for extreme applications where large geometries are required, such as dies or thermal insulators. It has a similar composition to Duratron® T4203 PAI and is known for its high compressive strength, elongation, and impact resistance.Features:Outstanding electrical insulation propertiesExcellent dimensional stabilityHigh compressive strength and elongationImpact resistanceBenefits:Suitable for extreme applications such as dies and thermal insulatorsCan be used for large geometriesCan be used for electrical connectors and insulatorsApplications:Electrical connectors and insulatorsStructural components such as linkages and seal ringsWear applications involving impact loading and abrasive wearHigh Temperature Electrical ConnectorsBearing CagesCan Mandrel
Mitsubishi Chemical Group Corporation
Ertalyte® PET - P
Polymer Name:
Polyethylene Terephthalate (PET)
Physical Form:
Tube, Plates, Rods
Features:
Food Contact Acceptable, Excellent Rigidity, Low Moisture Absorption, Low Coefficient of Friction, Wear Resistant, High Strength, Acid Resistant, High Tolerance, High Loading Absorption Capability, Odorless, Dimensional Stability, Semi Crystalline, Chemical Resistant, Abrasion Resistant
Density:
1390.0 - 1390.0 kg/m³
Tensile Modulus:
3500.0 - 3500.0 MPa
Color:
White, Black
Ertalyte® is a high-performance polyethylene terephthalate polyester (PET) produced by Mitsubishi Chemical Advanced Materials. With its exceptional wear resistance, low coefficient of friction, high strength, and resistance to moderately acidic solutions, Ertalyte® is the ideal material for applications that require sustained high loads and high-temperature performance.Features:Excellent wear resistanceLow coefficient of frictionHigh strength and toughnessResistant to moderately acidic solutionsRetains more of its original strength up to 180° F / 85° C than nylons or acetalsBenefits:Capable of sustaining high loadsIdeal for applications requiring high-temperature performanceExtends the service life of componentsLow maintenance and repair costsSuitable for use in harsh environmentsApplications:PharmaceuticalFood processing and packagingOil and gasBearings and structural applicationsAny application requiring high load and high-temperature performance.
Mitsubishi Chemical Group Corporation
Acetron® H POM-H
Polymer Name:
Polyacetal Homopolymer (POM)
Physical Form:
Plates, Rods
Features:
High Hardness, Creep Resistant, Excellent Stiffness, Low Thermal Expansion, Low Moisture Absorption, Wear Resistant, High Strength, Excellent Mechanical Strength, Improved Wear, Good Machinability
Density:
1430.0 - 1430.0 kg/m³
Tensile Modulus:
3700.0 - 3700.0 MPa
Acetron® POM-H / Ertacetal® H is a homopolymer acetal grade that offers exceptional mechanical strength, stiffness, and hardness, making it the ideal choice for a wide range of demanding applications. Its superior creep resistance and low thermal expansion rate make it stand out from copolymer acetal grades, making it the go-to material for small diameter, thin-walled bushings, bearings, gears, electrical components, medical and diagnostic equipment, valves, and fluid handling components.Features:Superior mechanical strength, stiffness, and hardnessExceptional creep resistanceLow thermal expansion rateHigh wear resistanceBenefits:Durable and long-lasting performanceEasy installation and removal with minimal distortionHigh resistance to chemical wearHigh impact strength, even at low temperaturesExcellent dimensional stabilityApplications:Small diameter, thin-walled bushings and bearingsGearsElectrical componentsMedical and diagnostic equipmentValvesFluid handling components
Mitsubishi Chemical Group Corporation
Zeniva® ZA-500 PEEK
Polymer Name:
Polyetheretherketone (PEEK)
Physical Form:
Parts & Shapes, Plates, Rods
Features:
High Fatigue Resistance, X-Ray Transparent, Creep Resistant, Low Stress Shielding, Excellent Stiffness, High Loading Capacity, High Strength, Excellent Toughness, High Performance, Dimensional Stability, High Strain Capability
Density:
1290.0 - 1290.0 kg/m³
Tensile Modulus:
3600.0 - 3600.0 MPa
Zeniva® ZA-500 PEEK is a high-performance specialty polymer known for its remarkable strength, advanced stiffness, and exceptional toughness. Specifically designed for structural, load-bearing implantable medical devices, this bio-stable plastic offers excellent fatigue and creep resistance, ensuring durability under continuous strain and repeated loading. In comparison to metals, it presents advantages such as reduced stress shielding, absence of heavy metal allergies or ion erosion, and radiolucent properties for interference-free X-ray and CT scanning procedures.
THAI WAH
ROSECO® Mulch Film SM1
Tensile Modulus:
45.0 - 45.0 MPa
ROSECO® Mulch Film SM1 is a biocompostable black mulch film with high strength and mechanical performance. This layer of black mulch stops light from penetrating, encourages photosynthesis, keeps the soil moist, inhibits weed growth, boosts yield, and saves harvesting expenses.
SABIC's Specialties Business
ULTEM™ Dielectric Film UTF120
Polymer Name:
Polyether Imide (PEI)
Physical Form:
Film
Features:
Temperature Resistance, Flame Retardant, Unreinforced, Dimensional Stability, Design Flexibility, High Electric Breakdown Strength, Ease of Handling, Flame Resistant, Excellent Dielectric Properties
Density:
1290.0 - 1290.0 kg/m³
SABIC's Specialties Business ULTEM™ Dielectric Film UTF120 provides solutions for small to medium-sized, professional-grade capacitors, up to 10 microfarads in capacitance, to meet challenging industry requirements. The film exhibits stable properties across a range of temperatures (-40°C to +150 °C) and frequencies, including stable capacitance, good insulation resistance, a stable dielectric constant (Dk), and a low dissipation factor (Df). ULTEM™ Dielectric Film UTF120 has been validated by customers for use with both film-foil and metalized electrodes, including flat aluminum, heavy edge/light body, and fused/patterned electrode designs. It also offers excellent handling through metallization, winding, and capacitor squashing/flattening. Capacitors using this film are capable of passing industry-standard 260°C reflow soldering processes. It is available in 4, 5, 7, and 10-micron gauges and sold in 620mm x 5000m size rolls.
Dar-Tech Inc.
CDF Foil Material #ROLL 24X 200-05-09
Polymer Name:
Polypropylene/Foil/Polyethylene Film
Physical Form:
Film
Features:
Good Moisture Resistance, Oxygen Barrier, Food Contact Acceptable
CDF Foil Material #ROLL 24X 200-05-09 is a specialty foil material used for applications where oxygen and moisture vapor protection are important. It can be used to protect objects from dust, grease, or other contaminates. This material conforms to FDA regulations, Part 177.1520 CFR, for direct food contact.
Dar-Tech Inc.
CDF Foil Material #ROLL 48X 200-05-09
Polymer Name:
Polypropylene/Foil/Polyethylene Film
Physical Form:
Film
Features:
Good Moisture Resistance, Oxygen Barrier, Food Contact Acceptable
CDF Foil Material #ROLL 48X 200-05-09 is a specialty foil material used for applications where oxygen and moisture vapor protection are important. It can be used to protect objects from dust, grease, or other contaminates. This material conforms to FDA regulations, Part 177.1520 CFR, for direct food contact.
AGC Chemicals Americas, Inc.
Fluon® ETFE Film - Advanced Fluoropolymer Film 50N
Density:
1750.0 - 1750.0 kg/m³
AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 50N is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.
AGC Chemicals Americas, Inc.
Fluon® ETFE Film - Advanced Fluoropolymer Film 250NJ
Density:
1750.0 - 1750.0 kg/m³
AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 250NJ is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.
AGC Chemicals Americas, Inc.
Fluon® ETFE Film - Advanced Fluoropolymer Film 50LM
Density:
1750.0 - 1750.0 kg/m³
AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 50LM is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.
AGC Chemicals Americas, Inc.
Fluon® ETFE Film - Advanced Fluoropolymer Film 25N
Density:
1750.0 - 1750.0 kg/m³
AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 25N is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.
AGC Chemicals Americas, Inc.
Fluon® ETFE Film - Advanced Fluoropolymer Film 100N
Density:
1750.0 - 1750.0 kg/m³
AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 100N is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.
AGC Chemicals Americas, Inc.
Fluon® ETFE Film - Advanced Fluoropolymer Film 50HK(KN)
Density:
1750.0 - 1750.0 kg/m³
AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 50HK(KN) is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.
AGC Chemicals Americas, Inc.
Fluon® ETFE Film - Advanced Fluoropolymer Film 25MW
Density:
1750.0 - 1750.0 kg/m³
AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 25MW is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.
AGC Chemicals Americas, Inc.
Fluon® ETFE Film - Advanced Fluoropolymer Film 40N
Density:
1750.0 - 1750.0 kg/m³
AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 40N is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.
AGC Chemicals Americas, Inc.
Fluon® ETFE Film - Advanced Fluoropolymer Film 21GS
Density:
1750.0 - 1750.0 kg/m³
AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 21GS is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.
AGC Chemicals Americas, Inc.
Fluon® ETFE Film - Advanced Fluoropolymer Film 50MW
Density:
1750.0 - 1750.0 kg/m³
AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 50MW is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.
AGC Chemicals Americas, Inc.
Fluon® ETFE Film - Advanced Fluoropolymer Film 200NJ
Density:
1750.0 - 1750.0 kg/m³
AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 200NJ is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.
AGC Chemicals Americas, Inc.
Fluon® ETFE Film - Advanced Fluoropolymer Film 12N
Polymer Name:
Ethylene Tetrafluoroethylene Copolymer (ETFE)
Physical Form:
Film
Features:
High Durability, Non Stick, High Performance, UV Resistant, Good Moldability, High Dielectric Strength, Flexible, Excellent Transparency Properties, Excellent Flexibility, Good Mold Release, Excellent Anti-Fouling Properties, Low Dielectric Constant, Outdoor Durability, Good UV Resistance, Good Electrical Properties, Corona Treated, Very Good Heat Resistance, High Light Transmission, Good Weather Stability, Chemical Resistant, Wide Temperature Operating Range, Good Mechanical Properties
Density:
1750.0 - 1750.0 kg/m³
Color:
Transparent
AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 12N is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.
Norplex-Micarta
Norplex-Micarta NP511
Polymer Name:
Epoxy Resins & Compounds
Reinforcement Material:
Glass Fibers
Physical Form:
Fabric, Sheets
Density:
1800.0 - 1800.0 kg/m³
Features:
Electrically Insulating, Good Electrical Properties, UL Listed, High Temperature Strength, Good Impact Strength, Good Flexural Modulus, Excellent Mechanical Strength, Good Bonding Strength
NP511 consists of a woven glass fabric combined with high temperature epoxy resin system. NP511 has excellent mechanical strength and electrical properties from cryogenic to elevated temperatures. Continuous operating temperature is 175°C. This material meets NEMA G-11, MIL-I-24768/3, Type GEB and IEC-60893-3-2 EP GC 203.
Norplex-Micarta
Norplex-Micarta NP500A
Polymer Name:
Epoxy Resins & Compounds
Reinforcement Material:
Glass Fibers
Physical Form:
Sheets, Fabric
Density:
1770.0 - 1770.0 kg/m³
Features:
Thermally Insulating, Enhanced Physical Properties, Cost Effective, Good Mechanical Properties, Good Electrical Properties, Good Machinability, Low Temperature Strength
NP500A is constructed of a woven glass fabric combined with easy-machining, non-brominated epoxy resin. It is engineered to provide NEMA grade G-10 properties, but is easier to machine and more cost effective in many applications. Applications for NP500A include; low temperature thermal insulation, structural applications and various other mechanical, and electrical applications at low to moderately high temperatures. NP500A meets or exceeds the requirements of MIL-I-24768/2.
Norplex-Micarta
Norplex-Micarta NP511EM
Polymer Name:
Epoxy Resins & Compounds
Reinforcement Material:
Glass Fibers
Physical Form:
Sheets, Fabric
Density:
1800.0 - 1800.0 kg/m³
Features:
High Temperature Strength, Excellent Mechanical Strength, Enhanced Physical Properties, Arc Resistant, Good Electrical Properties, Good Machinability
NP511EM is constructed of a woven glass fabric combined with a high temperature, easy machining epoxy resin. It has excellent mechanical strength and electrical properties at elevated temperatures. The continuous operating temperature is 190°C, in mechanical applications. This material meets NEMA G-11 and MIL-I-24768/3, Type GEB.
Norplex-Micarta
Norplex-Micarta NP500CR
Polymer Name:
Epoxy Resins & Compounds
Reinforcement Material:
Glass Fibers
Physical Form:
Sheets, Fabric
Density:
1800.0 - 1800.0 kg/m³
Features:
Enhanced Physical Properties, Good Electrical Properties, Thermally Conductive
NP500CR (commonly referred to as G10 CR) consists of a glass fabric with an epoxy resin system resulting in excellent electrical characteristics and superior physical properties at cryogenic temperatures (-270 °C to 135 °C operating temperature range). Previously designated as Westinghouse/International Paper Micarta Cryogenic Grade 56 G12, it has low thermal conductivity and utilizes chemistry specifically designed for cryogenic applications.
Norplex-Micarta
Norplex-Micarta NP130
Polymer Name:
Epoxy Resins & Compounds
Reinforcement Material:
Glass Fibers
Physical Form:
Sheets, Fabric
Density:
1800.0 - 1800.0 kg/m³
Features:
Flame Retardant
NP130 is a woven glass fabric combined with halogenated epoxy resin system. NP130 is produced to printed circuit board quality standards. It is flame retardant, and meets the requirements of MIL-I-24768/27, Type GEE-F and IEC-60893-3-2 EP GC 202.
Norplex-Micarta
Norplex-Micarta NP310HT
Polymer Name:
Phenolic Compound
Reinforcement Material:
Cotton
Physical Form:
Sheets
Density:
1370.0 - 1370.0 kg/m³
Features:
Non Abrasive, Good Impact Strength, Dimensional Stability, Good Mechanical Properties, Wear Resistant, Good Machinability
Canvas machining grade for structural and mechanical applications. NP310HT has better impact strength than phenolic paper grades. It meets the requirements of MIL-I-24768/16, IEC-60893-4-PF CC 201 and is designed to meet GE specification A19B15B1.
Norplex-Micarta
Norplex-Micarta NP342LS
Polymer Name:
Phenolic Compound
Reinforcement Material:
Cotton
Physical Form:
Sheets
Density:
1370.0 - 1370.0 kg/m³
Features:
Good Moisture Resistance, Good Machinability, General Purpose, High Temperature Strength, Excellent Mechanical Strength, Dimensional Stability, Low Shrinkage
Fine weave canvas phenolic engineered for dimensional stability and mechanical strength at temperatures as high as 125ºC. Providing excellent moisture resistance and easy to machine, NP342LS low-shrink material was designed for use in Class B generators for wedge applications and can be tested to the General Electric specification A50A341.
Norplex-Micarta
Norplex-Micarta NP130HF
Polymer Name:
Epoxy Resins & Compounds
Reinforcement Material:
Glass Fibers
Physical Form:
Fabric, Sheets
Density:
1950.0 - 1950.0 kg/m³
Features:
High Flexural Modulus, Warp Resistant, High Stiffness, Dimensional Stability, Enhanced Physical Properties
NP130HF is a woven glass fabric composite combined with epoxy resin system, which is engineered to provide better physical properties than standard NEMA FR-4. It is significantly more dimensionally stable than NP130 or NP510A because of its low resin content. The main application for NP130HF is for “bed-of-nails” probe boards used for printed circuit board testing, and other structural applications. Certification to IEC-60893-3-2 EP GC 202
Norplex-Micarta
Norplex-Micarta NP510A
Polymer Name:
Epoxy Resins & Compounds
Reinforcement Material:
Glass Fibers
Physical Form:
Sheets, Fabric
Density:
1850.0 - 1850.0 kg/m³
Features:
Good Impact Strength, Good Flexural Modulus, Good Bonding Strength, Brominated, Electrically Insulating, Good Electrical Properties, Consistent High Quality, UL Listed
NP510A is a woven glass fabric composite combined with epoxy resin system. It is engineered to provide NEMA grade FR-4 properties. This material contains bromine on the epoxy resin backbone. NP510A is certifiable to MIL-I-24768/27, Type GEE-F.
Norplex-Micarta
Norplex-Micarta NP504
Polymer Name:
Phenolic Compound
Reinforcement Material:
Glass Fibers
Physical Form:
Fabric, Sheets
Density:
1800.0 - 1800.0 kg/m³
Features:
High Temperature Resistance, High Temperature Strength, Good Impact Strength, Good Flexural Modulus, Good Compressive Strength, Creep Resistant
Woven glass fabric with high temperature phenolic resin. Good flexural, compressive and impact strengths at elevated temperatures. It is capable of continuous operation at 175°C. NP504 has excellent creep resistance because of the phenolic resin system. Meets MIL-I-24768/18 GPG. For NFPA 130 data please reference document NP504 Additional Data Sheet - NFPA 130. Certification to IEC standard is pending.
Norplex-Micarta
Norplex-Micarta MC320LE
Polymer Name:
Phenolic Compound
Reinforcement Material:
Cotton
Physical Form:
Sheets
Density:
1380.0 - 1380.0 kg/m³
Features:
Low Moisture Absorption, Bearing Grade, Wear Resistant, Good Electrical Properties, Medium Strength, Good Machinability
Grade MC320LE is a fine weave bleached cotton phenolic composite that has excellent machining characteristics and low moisture absorption. Applications include marine applications, terminal boards and parts requiring medium strength and excellent electrical characteristics. MC320LE meets or exceeds the requirements of MIL-I-24768/13 and ASMT F2953-12 Type FB. Certification to IEC standard is pending.
Show
36
of 1,837 results
Go to page
1
2
3
4
5
6
7
8
9
10