Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Industries
Packaging
Product Families
View All
Nonwovens
Industrial
Films
Consumer
Compounding
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde for Suppliers
Knowde
Plastics
Thermoset Resins
Polyurethanes
Products results
249 Products found
Filters
Suppliers
Applications
Polymer Name
Mechanical Properties
Physical Properties
Features
Products
Brands
Suppliers
Formulations
Documents
Relevance
Hapco Inc.
Di-Pak™ R-4912
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Encapsulating, Potting
End Uses:
Power Cable Shields, Switches, Electrical/Electronic Applications, Battery Cases
RIGIDDI-PAK R-4912 & R-4260 A/BLow viscosity, fast cure, high performance, high HDT potting and encapsulating compounds with excellent properties and FAST TURNOVER. Both are two part systems with 1:1 mix ratios by volume.Available in flame retardant
Ebalta Kunststoff Gmbh
Ebalta Kunststoff Gmbh HFGPUR 11
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Casting
Density:
950.0 - 990.0 kg/m³
Ebalta HFG / PUR 11 is a light filled 2-components-polyurethane casting compound, which cures fast at room temperature. After curing this material is dimensional accurate light weight but anyway resistant, which is especially suitable for big volume backfilling of coreboxes and negative molds. For bigger wall thickness it is possible to mix about 35 volume parts "Kunststoffgranulat" (=synthetic granules) in comp. A in advance
Hapco Inc.
Di-Pak™ R-4545/44
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Encapsulating, Potting
End Uses:
Power Cable Shields, Switches, Electrical/Electronic Applications, Battery Cases
RIGIDDI-PAK R-4545 SeriesA very low viscosity potting and encapsulating system with excellent flow and penetration into the most intricate electronic components, without voids or porosity. The R-4545 Series cure to a hard, shiny, high gloss, plastic finish that is free from "blushing" under all humidity conditions. The R-4545 Series is ideal for electrical applications where surface finish and appearance are critical.
Smooth On
Smooth-Cast® 385
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Casting
End Uses:
Mold Making, Industrial Parts, Foundry Dressings
Density:
1600.0 - 1600.0 kg/m³
Smooth-Cast® 385 is a mineral filled urethane casting resin that is very hard and durable. When Parts A and B are mixed in proper proportion (1A:5B by weight), Smooth-Cast™ 385 cures at room temperature with virtually no shrinkage. This rigid urethane casting resin has high compressive and flexural strength. Fully cured castings are tough, machinable and paintable. Color effects are possible by adding pigment dispersions. They resist moisture and mild solvents. Smooth-Cast™ 385 is ideal for making industrial production parts, foundry patterns, vacuum forming molds, and some ceramic applications.
Austin Novel Materials
TEXALAN® 282A
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Extrusion, Injection Molding
End Uses:
Cables, Pipes, Film, Flexible Packaging, Belts & Belt Repair, Automotive Applications, Automotive Exterior Parts
Density:
1170.0 - 1210.0 kg/m³
Tensile Strength:
32.0 - 32.0 MPa
TEXALAN® 282A This product is safe and environmentally friendly, has excellent abrasion resistance, solvent resistance, good hand feeling, repeated benefits High utilization rate, high strength and excellent processing performance.
Hapco Inc.
Di-Pak™ R-4528/7
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Encapsulating, Potting
End Uses:
Power Cable Shields, Switches, Electrical/Electronic Applications, Battery Cases
RIGIDDI-PAK R-4528 SeriesA black, flame retardant, thermally conductive, high performance series that can be used in all types of electrical components. Combined with its ability to dissipate heat, DI-PAK R-4528 also provides low linear thermal expansion, low shrinkage, and low exothermic heat while curing. Meets UL requirements.
Ebalta Kunststoff Gmbh
Ebalta Kunststoff Gmbh GM 956 90Comp. A+B
Polymer Name:
Polyurethane (unspecified)
End Uses:
Tires, Tubing, Flexible Grips
Density:
1030.0 - 1070.0 kg/m³
Tensile Strength:
6.0 - 8.0 MPa
This product is a polyurethane system. "VP"-products are experimental products. Regarding technical data slight modifications are possible.
BCC Products
BCC Resins™ BC 8002
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Casting
End Uses:
Power/Other Tools, Molds/Dies/Tools, Prototyping
BCC Kwik Kast II is an advanced fast cast polyurethane tooling system. BC 8002 exhibits exceptionally low viscosity, low odor and is color contrasted for uniform mix. It features low exotherm and minimal shrinkage. Kwik Kast II cures hard, yet more durable resulting in less brittle parts. Uses include; tracing models core boxes, duplicating aids, patterns, prototypes, low temperature vacuum form tools, etc.Handling Properties:BCC's Kwik Kast II is a fast-setting, two part casting system which requires careful preparation prior to mixing parts A and B. Because Kwik Kast II contains components of high density there will be some separation at the bottom of each container. Using a paint shaker, jiffy mixer, or mixing spatula, re-suspension of the ingredients is easily accomplished. Precaution should be taken to prevent any moisture contamination from containers or utensils. It is recommended that the work area be well ventilated and normal cleanliness and safety rules be observed. Avoid prolonged exposure to vapors and contact with skin.Preparation of Mold Surface:Clean the surface from dust and possible presence of moisture. Apply BC 87 Parting Agent and polish to a uniform high gloss finish (usually 2-3 coats are recommended). For plaster or wood surfaces seal with PVC sealer to ensure complete absence of moisture, followed by 2-3 coats of 87 Parting Agent.Mixing and Pouring:Although not necessary, best results are obtained by evacuation of each component under 29 inches of vacuum which removes entrapped air prior to blending the two components. Pour weighed or measured amounts of Part A & B into a separate dry container by pouring Part A into Part B. Mix with a spatula or mechanical stirrer for 30-40 seconds for quart size batches or 40-50 seconds for gallon batches while avoiding air entrapment. Immediately pour mixed resin uninterrupted from a convenient height above the mold cavity. Clean your mixing tools by rinsing in an alcohol type solvent. Larger masses (2 feet or more) may be built up with successive pours. Castings may be demolded within 60-90 minutes but should be properly supported while "green". Under normal conditions, maximum hardness or cure will be achieved in 12-18 hours.
Hapco Inc.
Di-Pak™ E-4540
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Encapsulating, Potting
End Uses:
Power Cable Shields, Switches, Electrical/Electronic Applications, Battery Cases
DI-PAK E-4500 SERIESFlexible, 45, 65 and, 95 shore A hardness, potting and encapsulating systems. Flame retardant (FR), accelerated 3 minute (-3) gel time, and black or unpigmented versions are available.
Hapco Inc.
Di-Pak™ R-4525/40
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Encapsulating, Potting
End Uses:
Power Cable Shields, Switches, Electrical/Electronic Applications, Battery Cases
RIGIDDI-PAK R-4525 SeriesA general purpose series of low viscosity, strong, potting and encapsulating compounds. DI-PAK R-4525 has excellent electrical insulating properties and bonds well to many substrates. By varying the curing agents, the desired cure and working life can be obtained.
Hapco Inc.
Di-Pak™ E-4671
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Encapsulating, Potting
End Uses:
Power Cable Shields, Switches, Electrical/Electronic Applications, Battery Cases
DI-PAK E-4600 SERIESFlexible, high strength, 50 to 71 shore D hardness potting and encapsulating systems. Available in flame retardant (FR), 3 minute (-3) gel time, and in black or unpigmented.
BCC Products
BCC Resins™ DP-11-83
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Casting
End Uses:
Cable Jacketing
DP-11-83 is a low viscosity, quick setting, easy to use adhesive and/or casting material. This product was designed to bond together the MB1200 foam board to create desired dimensions in length, width and height. DP-11-83 has a working life of up to 13 minutes for casting applications. If used as an adhesive, it is workable for up to 16 minutes.
Hapco Inc.
Ultralloy™ 3312
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Casting, Vacuum Casting
End Uses:
Prototyping, Agricultural Applications, Housings, Toys
The ULTRALLOY series of liquid molding compounds are tough, fast cycling, low cost, and easy to use. ULTRALLOY is designed to be used with Liquid Molding, open casting, pressure casting, or vacuum casting processes. ULTRALLOY can be used with silicone, epoxy, urethane, polyester, or aluminum molds. Low cost molds and fast cycle times are two key attributes of ULTRALLOY.ULTRALLOY is available in several series. Each series has different products with different physical properties. Properties such as elongation, tensile strength, and modulus of elasticity can be selected to mold parts with the correct physical characteristics. Choose the ULTRALLOY material with the exact properties you need, or that are required to meet specifications.ULTRALLOY is available in opaque white, clear/transparent, and in fire retardant (UL 94V-0) versions. Custom coloring can be achieved by pigmenting ULTRALLOY with Hapco's easy to mix color dispersions. Both opaque and translucent color dispersions are available.ULTRALLOY can be molded in inexpensive molds, reducing total part cost, for short run programs.ULTRALLOY is made for prototypes and short runs of plastic parts. ULTRALLOY fills the need for low cost, high performance parts, in volumes less than 10,000 parts per year.ULTRALLOY 3300 SERIESA series of flame retardant, (UL 94V-0) high strength, systems with excellent physical properties. This series can be pressure or vacuum cast. Underwriter Labs Flame Retardant 94V-0 @ 2.5 mm thickness. This series is available in a 2, 4, 14, and 28 minute gel time.
Hapco Inc.
Di-Pak™ E-4901-30
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Potting
End Uses:
Power Cable Shields, Switches, Electrical/Electronic Applications, Battery Cases
DI-PAK E-4901-2, E-4901-10, & E-4901-30Low cost, easy to use, potting compounds with fast cycle times. Available in 3 speeds.
Cridel
Cridel UR630/UI711
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Casting
End Uses:
Tooling
Cridel UR630/UI711 is an polyurethane-based casting compound used in tooling and pattern making.
DIC Corporation
Plyadeck™ HF-3500
Polymer Name:
Polyurethane (unspecified)
End Uses:
Flooring
PANDEX, WALL-LITE series are single-pack and twin-pack polyurethane resins developed for waterproofing of rooftops and walls and adhesion of rubber chips. The series characteristically excel in workability and hardening effects.
BCC Products
BCC Resins™ MB2001
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Machining
End Uses:
Molds/Dies/Tools, Modeling Material, Prototyping, Agricultural Applications, General Purpose, Automotive Applications, Aerospace Applications
MB2001 is a general purpose light weight urethane board engineered specifically to meet the tooling requirements of a wide range of applications for the automotive/aerospace, prototype, foundry, and architectural industries. MB2001 is an easy to machine, simulated wood-like product (free or grain) that is dimensionally stable and exhibits unsurpassedwoodworking properties. Some of its outstanding performance features are listed below
Hapco Inc.
Di-Pak™ R-4200
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Encapsulating, Potting
End Uses:
Power Cable Shields, Switches, Electrical/Electronic Applications, Battery Cases
RIGIDDI-PAK R-4200A low viscosity, long working life compound designed for potting/encapsulating units requiring high physical strength, and excellent penetration & adhesion to components. DI-PAK R-4200 holds its mechanical & electrical properties while under the most severe conditions, due to its low water absorption, and retention of strength at elevated temperatures.
Austin Novel Materials
TEXALAN® 382A
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Extrusion, Injection Molding
End Uses:
Cables, Pipes, Film, Flexible Packaging, Belts & Belt Repair, Automotive Applications, Automotive Exterior Parts
Density:
1190.0 - 1230.0 kg/m³
Tensile Strength:
30.0 - 30.0 MPa
Texalan® 382A This product has excellent wear resistance, oil/solvent resistance, low temperature flexural resistance, high pressure resistance, and Flexibility.
Hapco Inc.
Di-Pak™ E-4901-10
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Potting
End Uses:
Power Cable Shields, Switches, Electrical/Electronic Applications, Battery Cases
DI-PAK E-4901-2, E-4901-10, & E-4901-30Low cost, easy to use, potting compounds with fast cycle times. Available in 3 speeds.
Ebalta Kunststoff Gmbh
Ebalta Kunststoff Gmbh SG 130 LPUR 11
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Casting
End Uses:
Tooling, Power/Other Tools, Molds/Dies/Tools, Foundry Dressings, Modeling Material
Density:
1080.0 - 1120.0 kg/m³
Ebalta SG 130 L / PUR 11 is a Polyurethane system. Material should be carefully stirred up/ shaked before use. Filler content and sales units are on the separate mixing table noted
Ebalta Kunststoff Gmbh
Ebalta Kunststoff Gmbh GM 956GM 956 30
Polymer Name:
Polyurethane (unspecified)
End Uses:
Tires, Tubing, Flexible Grips
Density:
1020.0 - 1060.0 kg/m³
Tensile Strength:
2.0 - 2.4 MPa
This product is a polyurethane system. After use please close the containers carefully. The product can be subject to color variations due to raw materials, but these color variations have no influence on the quality and the properties of the product. Seal porous mold surfaces first (ebalta mold sealer). For optimum mold releasing we recommend a special release agent (like T1-1), which can be applied easily with a brush or be sprayed. Releasing of the mold 2-3 times, evaporate for about 20 min. after each releasing.
Hapco Inc.
Di-Pak™ E-4566
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Encapsulating, Potting
End Uses:
Power Cable Shields, Switches, Electrical/Electronic Applications, Battery Cases
DI-PAK E-4500 SERIESFlexible, 45, 65 and, 95 shore A hardness, potting and encapsulating systems. Flame retardant (FR), accelerated 3 minute (-3) gel time, and black or unpigmented versions are available.
Austin Novel Materials
TEXALAN® 360A
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Extrusion, Injection Molding
End Uses:
Cables, Pipes, Film, Flexible Packaging, Belts & Belt Repair, Automotive Applications, Automotive Exterior Parts
Density:
1190.0 - 1190.0 kg/m³
Tensile Strength:
20.0 - 20.0 MPa
Texalan® 360A product has excellent processing properties, oil/solvent resistance, low temperature flexural resistance, high resilience, and flexibility.
Hapco Inc.
Di-Pak™ E-4671-3
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Encapsulating, Potting
End Uses:
Power Cable Shields, Switches, Electrical/Electronic Applications, Battery Cases
DI-PAK E-4600 SERIESFlexible, high strength, 50 to 71 shore D hardness potting and encapsulating systems. Available in flame retardant (FR), 3 minute (-3) gel time, and in black or unpigmented.
Smooth On
Smooth-Cast™ 300
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Casting
End Uses:
Jewelry, Modeling Material, Prototyping
Density:
1050.0 - 1050.0 kg/m³
Tensile Strength:
20.67 - 20.67 MPa
Smooth-Cast™ 300 is ultra-low viscosity casting resins that yield castings that are bright white and virtually bubble free. Vacuum degassing is not necessary. They offer the convenience of a 1A:1B by volume or 100A:90B by weight mix ratio. The differences between them are pot life and demold time.
Ebalta Kunststoff Gmbh
Ebalta Kunststoff Gmbh GM 984 2Comp. A+B
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Casting
Density:
1130.0 - 1170.0 kg/m³
Tensile Strength:
25.0 - 29.0 MPa
This product is a polyurethane system. GM 984-1 Comp. B (Amine) can be subject to color variations due to raw materials, but these color variations have no influence on the quality and the properties of the product. The postcured material is not UV stable and darkens by and by. However according to our experience the change in color does not affect its utilizability. Physical final properties will be achieved after 7 days' curing at room temperature or after postcuring for 8 hrs. at 80°C. As bonding agent on aluminum support we recommend our PU coupling paste KP 8.
BCC Products
BCC Resins™ BC 8163
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Casting
End Uses:
Modeling Material, Prototyping
BC 8163 is a very low viscosity, rapid setting, rigid urethane compound. This system will cure quickly to a hard, tough, impact resistant casting. BC 8163 is non-sensitive to moisture after cure and will readily bond to itself if stage pours are required. The one-to-one volume mix ratio makes the system readily adaptable for machine mixing and dispensing. BC 8163 is recommended in applications where a "thermoplastic feel" is desired.
BCC Products
BCC Resins™ MB3500
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Machining
End Uses:
Modeling Material, Prototyping, Agricultural Applications
BCC Products now offers a revolutionary state-of-the-art machinable fixture board for today's demanding tooling requirements. MB 3500 is an extremely tough, high impact Urethane Plank, that can replace aluminum and other metals for many foundry applications.
Ebalta Kunststoff Gmbh
Ebalta Kunststoff Gmbh GM 984 1Comp. A+B
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Casting
Density:
1130.0 - 1170.0 kg/m³
Tensile Strength:
37.0 - 41.0 MPa
This product is a polyurethane system. GM 984-1 Comp. B (Amine) can be subject to color variations due to raw materials, but these color variations have no influence on the quality and the properties of the product. The postcured material is not UV stable and darkens by and by. However according to our experience the change in color does not affect its utilizability. Physical final properties will be achieved after 7 days' curing at room temperature or after postcuring for 8 hrs. at 80°C. As bonding agent on aluminum support we recommend our PU coupling paste KP 8.
Hapco Inc.
Ultralloy™ 109 White
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Vacuum Casting, Casting
End Uses:
Toys, Prototyping, Agricultural Applications, Housings, General Purpose
The ULTRALLOY series of liquid molding compounds are tough, fast cycling, low cost, and easy to use. ULTRALLOY is designed to be used with Liquid Molding, open casting, pressure casting, or vacuum casting processes. ULTRALLOY can be used with silicone, epoxy, urethane, polyester, or aluminum molds. Low cost molds and fast cycle times are two key attributes of ULTRALLOY.ULTRALLOY is available in several series. Each series has different products with different physical properties. Properties such as elongation, tensile strength, and modulus of elasticity can be selected to mold parts with the correct physical characteristics. Choose the ULTRALLOY material with the exact properties you need, or that are required to meet specifications.ULTRALLOY is available in opaque white, clear/transparent, and in fire retardant (UL 94V-0) versions. Custom coloring can be achieved by pigmenting ULTRALLOY with Hapco's easy to mix color dispersions. Both opaque and translucent color dispersions are available.ULTRALLOY can be molded in inexpensive molds, reducing total part cost, for short run programs.ULTRALLOY is made for prototypes and short runs of plastic parts. ULTRALLOY fills the need for low cost, high performance parts, in volumes less than 10,000 parts per year.ULTRALLOY 100 SERIESA series of general purpose Liquid Molding Compounds. This product turns a natural white but is available pigmented white for extra brightness. Both versions are available in an 8.5 minute or 25 minute gel time.
Hapco Inc.
Di-Pak™ R-4354
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Encapsulating, Potting
End Uses:
Power Cable Shields, Switches, Electrical/Electronic Applications, Battery Cases
RIGIDDI-PAK R-4354A 100% solids, room temperature cure, dielectric insulating material used for sealing, coating, bonding and potting. R-4354 is a medium viscosity, slightly thixotropic system.
Ebalta Kunststoff Gmbh
Ebalta Kunststoff Gmbh SG 130PUR 11
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Casting
End Uses:
Tooling, Power/Other Tools, Molds/Dies/Tools, Foundry Dressings, Modeling Material
Density:
1080.0 - 1120.0 kg/m³
This is a Polyurethane system. Material should be carefully stirred up/ shaked before use. Filler content and sales units are on the separate mixing table noted.
Nippon Pelnox
Pel-Urethane® MU-115B
Polymer Name:
Polyurethane (unspecified)
End Uses:
Speed Sensor, Relay Bases, Automotive Electronics, Semiconductor Applications, Encapsulant
The MU-115B will perform flexible and heat cycle resistant functions.
Hapco Inc.
Di-Pak™ E-4565
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Encapsulating, Potting
End Uses:
Power Cable Shields, Switches, Electrical/Electronic Applications, Battery Cases
DI-PAK E-4500 SERIESFlexible, 45, 65 and, 95 shore A hardness, potting and encapsulating systems. Flame retardant (FR), accelerated 3 minute (-3) gel time, and black or unpigmented versions are available.
Hapco Inc.
Di-Pak™ R-4806
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Encapsulating, Potting
End Uses:
Power Cable Shields, Switches, Electrical/Electronic Applications, Battery Cases
RIGIDDI-PAK R-4806 & R-4807 A/BLow viscosity, fast cure, high performance, potting and encapsulating compounds with excellent properties and FAST TURNOVER. Both are two part systems with 1:1 mix ratios by volume.
Show
36
of 249 results
Go to page
1
2
3
4
5
6
7