Ebalta Kunststoff - GM 984 1Comp. A+B - Polyurethane

Identification & Functionality

Features & Benefits

Materials Features: Abrasion Resistant,
Flexible,
High Hardness
Properties: very abrasion resistant
hard flexible
no brittleness phase
very well castable
long potlife
Shore D hardness approx. 65

Applications & Uses

Markets: Building & Construction
Applications: Building & Construction — Building Materials
Interior Fixtures
Plastics & Elastomers Processing Methods: Casting
Applications: Core boxes
fixtures
Processing Instructions: Material- and processing temperature: between 18 - 25 °C.

Close containers after use.

Seal porous mold surfaces first (ebalta mold sealer).

For optimum mold releasing we recommend a special release agent (like T1-1), which can be applied easily with a brush or be sprayed. Releasing of the mold 2-3 times, evaporate for about 20 min. after each releasing.

Mixing ratio resin/hardener according to instructions.

Stirring rods etc. with residual resin can be easily cleaned with ebalta cleaning agent.

Important processing instructions:

B comp. (amine) must be stirred in and carefully mixed into A comp. (isocyanate). The material must be free of streaks.

Properties

	Value	Units	Test Method / Conditions
Wear jet test	ca 41	W(V/t) [mm³/min]	—
Viscosity (25°C)	3500 ± 500	mPa.s	—
Elongation of tensile strength	311 ± 8	%	—
Density (20°C)	1,15 ± 0,02	g/cm3	—
Flexural enlongation at flexural strength	7 ± 0.5	%	EN ISO 178
Pot Life (200g/20°C)	30 - 45	minutes	—
Flexural modulus	787 ± 40	MPa	EN ISO 178
Curing time at RT	12-15	Hrs	—
Flexural strength	28 ± 1	MPa	EN ISO 178
Shore hardness	65 ± 2	Shore A	DIN ISO 7619-1
Tensile strength	39 ± 2	kN/m	—

Packaging & Availability

Packages: Packing size B-Pack GM 984-1 / Comp. A+B 8 x 0,300 kg Comp. A/8 x 0,390 kg Comp. B = 5,520 kg

Storage & Handling

Storing: Storage at room temperature 18-25 °C.
Opened containers should be closed immediately after use and should be used up as soon as possible.

Ebalta Kunststoff Gmbh GM 984 1Comp. A+B