Products results

Cadmium sulfate is a global producer of Cadmium material solutions. Our product offerings span a range from Cadmium metal ingots, rods, and powder to Cadmium compounds like Cadmium oxides. Our state-of-the-art production facility and the associated products are fully REACH compliant, comply with international EHS standards and are safe. Our customer base can be found in the area of alloys, energy storage, pigments as well as in the solar cell world.

ZOLTEK PXFB carbonized fabrics are produced from 100% ZOLTEK OX fabrics; being continuously carbonized and supplied in roll form. Continuous carbonization ensures thickness uniformity throughout the roll. ZOLTEK PXFB carbonized fabrics can be used in many applications, including stationary energy storage batteries, fire protective insulation, high temperature and chemically corrosive applications and as carbon composite materials for friction end uses. Customers can apply their own post treatments and the carbonized fabric is easy to cut and process for specific end use applications.

Polynt Group BMC RF 9/25 is a bulk molding compound based on an unsaturated polyester resin, fire retardant grade, halogen-free, reinforced with glass fibers. This BMC has been developed for electrical application. Good mechanical properties and good fire protection grade are combined into the BMC RF 9/25. BMC RF 9/25 is certified V0 3,0 mm by UL laboratories. BMC RF 9/25 is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

Polynt Group HUP 10/25 RN-Color is generally used in electronic and electrical, foundries, peroxides applications.

Polydyne® 5005 is used for general purpose and gel coat formulation. Main applications areas are composites, textile industry etc.

NORSODYNE® M 28077 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce bmc and smc manufacture,electric parts through hot press molding,injection molding,rtm method.

RIGIDDI-PAK R-4545 SeriesA very low viscosity potting and encapsulating system with excellent flow and penetration into the most intricate electronic components, without voids or porosity. The R-4545 Series cure to a hard, shiny, high gloss, plastic finish that is free from "blushing" under all humidity conditions. The R-4545 Series is ideal for electrical applications where surface finish and appearance are critical.

Next Polymers Next PC CX-02GY is PC unfilled gray compound (RAL-7035).

RIGIDDI-PAK R-4525 SeriesA general purpose series of low viscosity, strong, potting and encapsulating compounds. DI-PAK R-4525 has excellent electrical insulating properties and bonds well to many substrates. By varying the curing agents, the desired cure and working life can be obtained.

Kibisan® PN-127 L100 FG is processed by Injection molding.

Polynt Group HUP 17/27 RB-7035 is generally used in electronic and electrical applications.

Moplen EP440M is the high isotacticity polypropylene block copolymer manufactured by PMC under the license of Lyondellbasellusing the Spheripol process. Moplen EP440M is a block copolymer and it is typically used by customers for injection molding of battery case.

KIBISAN® PN-106 is a Styrene Acrylonitrile (SAN) product. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America.Characteristics include: Flame Rated RoHS Compliant Clarity

Polynt Group VUP-2537117WH-22R is used in composites applications.

Flame retardant agent free, High flow, Flame-retardant 5V

Polynt Group 255X series gelcoats are formulated specifically for the fiberglass industry where reduced flame propagation properties are needed. Its specific formulation results in a unique hardness that helps to prevent graffiti and scratches. 255X series gelcoats are designed for interior application. Because of the special additives that improve hardness and decrease the flame spread, 255X series are not recommended for parts used under direct sun exposure or prolonged water immersion.

SAYTEX® 621 flame retardant is a physical blend of brominated polystyrene and a polyester resin. It is supplied in a convenient low-dust pellet form and contains a high level of bromine, about 64 percent.

Polynt Group BMC LP 250/22 RF is a bulk molding compound based on an unsaturated polyester resin, fire retardant grade, halogen-free, reinforced with glass fibers. This BMC has been developed for electrical application. Good mechanical properties and good surface are combined into the BMC RF 1600/20. BMC RF 1600/20 is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

Ercros Caustic potash is a solid, soluble, white and very basic chemical compound.

Prasol Chemicals LITHIUM HYDROXIDE is used in production of lithium greases as a heat transfer medium and as a storage-battery electrolyte in ceramics and some Portland cement formulations.

FutureSol® DMM Technical Grade is a low boiling solvent containing methanol and water. Its strong solvent properties and good water solubility make the material an excellent candidate for formulated cleaning applications.

DI-PAK E-4600 SERIESFlexible, high strength, 50 to 71 shore D hardness potting and encapsulating systems. Available in flame retardant (FR), 3 minute (-3) gel time, and in black or unpigmented.

Nanjing Shuguang Chemical Group Accelerant SG-R 703 is mainly used as ultra accelerator for natural and synthetic rubbers, and lattices. It is more active than ZDC in solid elastomer. The latex including this product can be used for a week without pre-vulcanization. It is excellent activator for thiazole accelerator. SG-R 703 is also antioxidant in rubber mixing. and It can improve aging resistance for vulcanized rubbers without discoloration, contamination, and gives excellent dispersion.

Lithium Acetate Dihydrate is widely utilized as a precursor for pharmaceuticals, in the production of antistatic fibers, buffer for gel electrophoresis of DNA and RNA, catalyst for textiles manufacturing, PVC stabilizer, yeast transformer, polymerization catalyst and key precursor material for lithium batteries.

Potassium formate (HCOOK) is a white, hygroscopic, readily biodegradable, and environmentally safe salt. When compared with traditional fluoride, chloride, bromide, sulfate and nitrate salts, HCOOK offers high solubility (3.3g/mL water), high density, alkaline pH (7.0-8.5 @ 25°C, 1 M in H2O), lower crystallization temperature,viscosity lower than LiBr, low latent heat of absorption, less corrosive than chloride-based salts, and negligible vapor pressure. Because of such versatile properties.

Polymer Industries' Densetec® Homopolymer Polypropylene exhibits the properties of high corrosion resistance, high temperature resistance, and great tensile strength. It maintains its stiffness at elevated temperatures and displays incredible resistance to organic solvents, degreasing agents, and electrolytic attack. In addition, the material is lightweight, and stain and moisture resistant. Due to its chemical resistance, Densetec® Homopolymer Polypropylene is ideally suited to be used with a wide range of chemicals. Its resistance to aggressive media permits it to be used in laboratories and a large variety of industrial applications. The material resists most strong acids and bases even at relatively high temperatures and concentrations.

RG 2800 K is a Polypropylene Block Copolymer Impact With High Toughness. It is used in Automotive (Bumpers, Fender, Battery Cases), Compounding (Impact Modifier)

Polynt Group 23V, 23VX - tooling gel coat; suitable for molds; cures to a very hard and resilient surface with a high gloss; high heat distortion temperature. It is generally used in composites applicatons.

Standard, Flame retardant

Kibisan® PN-117 L100 FG is processed by Injection molding.

Polycor® 945 Tooling polyester tooling gel coats provide durable surfaces to withstand the repeated moldings of FRP laminates. It is generally used in composites applicatons.

Sodium acetate trihydrate (NaCH3COO·3H2O) is a promising Phase Change Material (PCM) used to fabricate reusable heating pads and hand warmers because of its relative high heat of fusion. Its alkalinity (pH 8.5-9.5), as well as its low price, makes sodium acetate trihydrate the material for choice several applications.

AZSA 37 101 is used in Galvanizing and other protective coatings. Anodes for zinc-electroplating and anodes for cathodic protection. Zinc poder, zinc oxide and other chemical products. Zinc base alloys. Brass. Rolled zinc.

Polydyne® 5062P - preaccelerated, high transparency, flexible, low shrinkage. Main applications areas are composites, eyewear and jewelers, textile industry etc.

INFINO UF-1017S by LOTTE Advanced Materials is comprised of Polycarbonate. It is commonly used