Knowde Enhanced TDS
Identification & Functionality
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Materials Features
- Benefits
High Flow, Good dimensional stability , High heat resistance.
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Product Applications
Electrical/Electronics ,Housing Appliance & Industrial Application.
- Processing Guide
Pre-Heating
The material is supplied in airtight 3 layer Paper +PE + Aluminum foil liner bags, Still Nylon being hygroscopic material it is recommended for hot air drying at 80 °C for 4 to 6 Hrs ensuring maximum water content as 0.2 %.- Post Molding Recommendations
Molded components should be conditioned in water at a min of 95 deg C until they absorb 0.8-1.2 % of water above their original weight.
Properties
- Color
- Flame Rating
- Mechanical Properties
- Thermal Properties
- Electrical Properties
- Other Properties
- Injection Molding
- Rheological Properties
| Value | Units | Test Method / Conditions | |
| Tensile Strength | 60.0 | MPa | ASTM D-638 |
| Tensile Modulus | 2400.0 | MPa | ASTM D-638 |
| Elongation at Break | 25.0 | % | ASTM D-638 |
| Flexural Strength | 95.0 | MPa | ASTM D-790 |
| Flexural Modulus | 2200.0 | MPa | ASTM D-790 |
| Izod Notched Impact Strength(23°C) | 72.0 | Kj/m2 | ASTM D-256 A |
| Izod Notched Impact Strength(-30°C) | 11.0 | KJ/m2 | ASTM D-256 |
| Rockwell Hardness | 120.0 | R Scale | ASTM D-785 |
| Value | Units | Test Method / Conditions | |
| Heat Deflection Temperature (18.5Kg/Sq Cm Load) | 124.0 | °C | ASTM D-648 |
| Heat Deflection Temperature (4.5Kg/Sq Cm Load) | 140.0 | °C | ASTM D-648 |
| Melting Point | 142.0 | °C | ASTM D-2117 |
| Flammability UL 94(Thickness 0.8mm) | V2 | — | ISO1210/UL-94 |
| Thermal Conductivity | 0.2 | W/m-°C | ISO 11359-2 |
| CLTE (23°C - 80°C,flow) | 7.0e-05 | 1/°C | ASTM C 177 |
| Value | Units | Test Method / Conditions | |
| Dielectric Strength | 30.0 | V/Mil | ASTMD-149 |
| Relative Permittivity (60 Hz) | 3.0 | Volts | UL-746A,PLC Code-0 |
| Volume Restivity | 10000000000000.0 | Sec. | UL-746A, PLC Code-3 |
| Surface Restivity | 1.0e+15 | Gm/10min. | ASTMD-1238 |
| Value | Units | Test Method / Conditions | |
| Specific Gravity | 1.22 | — | ASTM D-792 |
| Water Absorption(Saturation. immersed) | 0.35 | % | ASTM D-570 |
| Water Absorption (23°C , 24 Hrs) | 0.3 | % | ASTM D-570 |
| Value | Units | Test Method / Conditions | |
| Feed Zone | 270 - 280 | °C | — |
| Compression Zone | 280 - 290 | °C | — |
| Mixing Zone | 290 - 300 | °C | — |
| Mould Temperatures | 80 - 110 | °C | — |
| Value | Units | Test Method / Conditions | |
| MFR (300°C/1.20 Kgs) | 30.0 | Gm/10min. | — |
| Mold Shrinkage(Parallel) | 0.4 | % | ASTMD-955 |
| Mold Shrinkage(Normal) | 0.4 | % | ASTMD-955 |
Regulatory & Compliance
- Certifications & Compliance
- Regulations compliance
Directive 1907/2006/EC This grade complies with ROHS directive 2002/95/EC.