Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Product Highlights
- Very low color
- Enhances flexibility
- Non-yellowing
- Improves adhesion
- Provides weatherability
- Oil & chemical resistant
- Exhibits hydrolytic stability
Applications & Uses
- Applications
- Applications
- Peroxide-cure roof coatings
- Floor coatings
- Laminating adhesives
Properties
- Typical Properties
- Cured Properties
- Uncured Properties
| Value | Units | Test Method / Conditions | |
| Fluorescing | Blue | - | - |
| Rheology | Newtonian | - | - |
| Value | Units | Test Method / Conditions | |
| Durometer Hardness | D60 | - | - |
| Elongation at Break | 200.0 | % | - |
| Glass Transition Temperature (Tg) | -48.0 | °C | - |
| Modulus of Elasticity | 158 [23,000] | MPa (psi) | - |
| Nominal Viscosity | 450.0 | cP | - |
| Tensile at Break | 580 | psi | - |
| Value | Units | Test Method / Conditions | |
| Density (25°C) | 1.1 | g/cm³ | — |
| Pt-Co Color (APHA) | max. 50 | - | - |
| Refractive Index (25°C) | 1.4 | - | - |
| Viscosity | 35000.0 | cP (at 20 rpm) | - |
| Viscosity at 25°C | 35000.0 | cP | - |
Technical Details & Test Data
- Typical Formulations
Adhesion Properties Substrate I30 I50 TM50 TP50 H50 HE30 ABS X XX Aluminum XX XX Cold Rolled Steel
X XXX Glass X HDPE X X PET PMMA X XX Polycarbonate X X Polypropylene PVC Stainless Steel XXX XXX X Recommended XX Highly Recommended XXX Strongly Recommended
Typical Formulations Test Formulation Name 130 150 TM50 TP50 H50 HE30 BR-742M 70 50 50 50 50 70 IBOA 30 50 TMPTA 50 TPGDA 50 HDDA 50 HEMA 30 Omnirad 184 2 2 2 2 2 2 Viscosity, 25°C* 3,600 800 3,400 1,000 500 - * Brookfield – CAP 2000+ @ 25°C.
Cured Mechanical Properties Property I30 I50 TM50 TP50 H50 HE30 Tensile Strength, psi**
600 1,400 1,400 1,000 900 - Elongation, 6** 290 400 4 20 6 - Elastic Modulus, ksi*
X X X X X - Durometer Hardness
49A 79A 68D 43D 53D - Water Absorption, 96 (24 hrs)
- MEK Double Rubs (#)
4 3.00 141.00 24 44 - Tg(DMA)=-48°C; Peak tan delta; cured with 2 phr of Omnirad® 184
** Per ASTM D882 – Not Tested || Incompatible X Unable to Measure
- Viscosity Reduction With Reactive Diluents
Safety & Health
- General Information
This product is intended for industrial use only. Keep out of the reach of children. Avoid breathing vapors. Avoid contact with skin, eyes, and clothing. Wear impervious gloves. Repeated or continuous skin contact with uncured material may cause irritation. Remove material from skin with soap and water. Never use organic solvents to remove material from skin and eyes. For more information on the safe handling of this material, please refer to the Safety Data Sheet before use.