Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Product Highlights
- Develops impact resistance
- Imparts toughness
- Great tensile strength
- Enhances flexibility
- Weatherability
- Hydrolytic stability
- Gloss finish
Applications & Uses
- Markets
- Coating Type
- Applications
- Coatings for plastics
- Coatings for metal
Properties
- Cured Properties
- Uncured Properties
| Value | Units | Test Method / Conditions | |
| Durometer Hardness | D80 | - | - |
| Elongation at Break | 25.0 | % | - |
| Glass Transition Temperature (Tg) | 23.0 | °C | - |
| Linear Shrinkage | 1.0 | % | - |
| Nominal Viscosity | 14000.0 | cP | - |
| Tensile at Break | 22.9 [3,320] | MPa (psi) | - |
| Water Absorption (25˚C, 24 h) | 1.3 | % | - |
| Value | Units | Test Method / Conditions | |
| Density (25°C) | 1.06 | g/cm³ | — |
| Pt-Co Color (APHA) | max. 50 | - | - |
| Refractive Index (25°C) | 1.476 | - | - |
| Viscosity at 50°C | 60000.0 | cP | - |
| Viscosity at 60°C | 25000.0 | - | - |
Technical Details & Test Data
- Typical Formulations
Adhesion Properties Substrate I30 I50 TM50 TP50 H50 HE30 ABS XXX XX X Aluminum XX Cold Rolled Steel
X XX Glass XX HDPE PET XXX XXX XXX XXX XXX X PMMA XX XX Polycarbonate XX XXX XXX XX XX Polypropylene X PVC XX XXX XXX XX XXX Stainless Steel X X Recommended XX Highly Recommended XXX Strongly Recommended
Typical Formulations Test Formulation Name 130 150 TM50 TP50 H50 HE30 BR-742M 70 50 50 50 50 70 IBOA 30 50 TMPTA 50 TPGDA 50 HDDA 50 HEMA 30 Omnirad 184 2 2 2 2 2 2 Viscosity, 25°C* 29,000 3,800 15,000 4,200 1,900 12,000 * Brookfield – CAP 2000+ @ 25°C.
Cured Mechanical Properties Property I30 I50 TM50 TP50 H50 HE30 Tensile Strength, psi**
800 2,400 2,600 2,100 2,100 700 Elongation, 6** 90 110 22 14 6 80 Elastic Modulus, ksi*
2.9 45 140 55 65 4 Durometer Hardness
86A 57D 79D 61D 67D 70A Water Absorption, 96 (24 hrs)
1 0.37 1 1 1 4 MEK Double Rubs (#)
81 17 >200 22 31 5 Tg(DMA)=29°C; Peak tan delta; cured with 2 phr of Omnirad® 184
** Per ASTM D882 – Not Tested || Incompatible X Unable to Measure
- Viscosity Reduction With Reactive Diluents
Safety & Health
- General Information
This product is intended for industrial use only. Keep out of the reach of children. Avoid breathing vapors. Avoid contact with skin, eyes, and clothing. Wear impervious gloves. Repeated or continuous skin contact with uncured material may cause irritation. Remove material from skin with soap and water. Never use organic solvents to remove material from skin and eyes. For more information on the safe handling of this material, please refer to the Safety Data Sheet before use.