Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Product Highlights
- DAI EL LATEX GLS grade is a water based fluoroelastomer coating.
- GL - 200RB is mixed to cure the layer before applying.
- DAI EL LATEX GLS 213RA makes a red coating layer displaying elasticity, heat resistance, low friction and chemical resistance.
- It is good for surface modification of elastic substrate.
Applications & Uses
- Compatible Substrates & Surfaces
Properties
- Physical Form
- Characteristics
- Characteristics of Coating Film
- Note
- GLS - 213RA/GL - 200RB mixing ratio (weight) :100/5
- The above values in properties are typical and not guaranteed.
Value | Units | Test Method / Conditions | |
Film Appearance | Walnut | — | — |
pH | 7.5 | — | — |
Sintering Temperature | approx. 120 - 350 | ℃ | — |
Solid Content | 50 | mass% | — |
Viscosity | 80 | cP | — |
Value | Units | Test Method / Conditions | |
Contact Angle (n-hexadecane, at 25°C) | 59 | Degree | Contact Angle Meter |
Contact Angle (Water, at 25°C) | 114 | Degree | Contact Angle Meter |
Elongation | 200 | % | — |
Tensile Strength | 13.5 | MPa | — |
Safety & Health
- Handling Method / Safety Information
- Be sure to read the notes on SDS and labels before use.
- This product is intended for general industry, and therefore its adequacy and safety as a raw material for medical purposes cannot be guaranteed