Products

deVan Sealants 401.2 Extruded Bead Sealer is a general-purpose, thumb-grade sealer that can be used for water, dust, air sealing, and sound deadening. It is used in the construction of automobiles, trailers, refrigerator cabinets, railroad cars, pre-fabricated buildings, and other areas that require a non-staining, non-hardening, non-drying sealer.

deVan Sealants 530.11 Insulated Electrical Sealant is a rubber compound designed specifically for insulating and protecting low voltage connectors in above-ground or buried installations. It's also useful for sealing ductwork, cable ends, and splice seals. It is pressure sensitive and is always flexible. 530.11 adheres well to the majority of clean, dry, oil-free substrates, including aluminum, copper, porcelain, glass, stainless steel, and neoprene jacket cables. It has a high degree of cohesive strength. 530.11 is not irritating or oxidizing.

deVan Sealants 570.11 Butyl Tape is a low-cost, all-purpose butyl-based sealing compound. It is available in convenient ready-to-use tapes or beads. This material is tough but pliable, and it can be worked by hand. Thermal expansion and contraction will not cause 570 to flow, sag, or pump from joints.

deVan Sealants 546.11 Burial Vault Sealant is an elastomeric product that adheres well to concrete, metal, and plastics, forming a seal against air, dust, and moisture. It is water resistant and will not cause skin to harden or lose flexibility. The Burial Vault Sealer 546.11 remains flexible at 0°F and functional at 200°F.

deVan Sealants 404.2 Thumbing Compound is a general-purpose product used to seal against water, dust, and air. It can also be used as a noise and sound deadener. 404 is used in the assembly or repair of automobiles, trailers, refrigerator cabinets, HVAC, railroad cars, pre-fabricated buildings, and a variety of other applications. It can be used anywhere a non-staining, non-hardening, non-drying sealer is required.

deVan Sealants 406.12 General Purpose Sealant is a general purpose, thumb grade sealant that can be used as a water, dust, and air sealant as well as a sound deadener. It is used in the construction of automobiles, trailers, refrigerator cabinets, railroad cars, and pre-fabricated buildings, among other things. 406.12 General Purpose Sealant is a non-staining, non-hardening, non-drying sealer that will not harm plastic, rubber, or paint. Adhesion is beneficial to commercially clean surfaces. It is paintable and can withstand standard bake cycles. It is insoluble in water but soluble in hydrocarbon solvents.

deVan Sealants 403.21 Freeze Thaw Stable Thumbing Compound is a premium thumb grade sealing compound that has been specially formulated to withstand multiple freeze/thaw cycles. It is used in the assembly of refrigerator and freezer cabinets, as well as anywhere freeze/thaw stability is required.

deVan Sealants 255.2 Pumpable Butyl Sealant is a pumpable, one-component butyl sealant designed to seal metal roofs and side walls. It is also used in refrigeration/freezer assembly, rigid joints, expansion joints, and between wood, glass, metal, and masonry. On commercially clean surfaces, 255.2 exhibits 100 percent cohesive failure. Apply with a caulking gun or pump at temperatures ranging from 40°F to 150°F. Cracks deeper than 12 inches should be filled from the bottom.

deVan Sealants 275.12 Non-Skinning, Standing Seam Pumpable Butyl Caulk is a high-quality, non-skinning, non-hardening, pumpable butyl-based sealing caulk. It is designed to seal metal wall panels, standing roof seams, roof deck panels, and expansion joints of similar and dissimilar materials without the use of a primer. It can be used in concealed joints in metal-to-metal assemblies. It is intended for factory or field application and is excellent for sealing joints against infiltration of air, dust, water, and pollutants.

deVan Sealants 570.12 Butyl Tape is a low-cost, all-purpose butyl-based sealing compound. It is available in convenient ready-to-use tapes or beads. This material is tough but pliable, and it can be worked by hand. Thermal expansion and contraction will not cause 570 to flow, sag, or pump from joints.