Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Properties
- Good mechanical strength and stiffness
- Scratchresistant
- High surface strength
- High impact strength
- High dimensional stability
- Not weather resistant
- Limited resistance to acid and lyes
Applications & Uses
- Markets
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Applications
- Mostly applications where a high impact strength at low temperatures is requested
- Model construction
- Galvanized components
Properties
- Color
- Flame Rating
- Form and Condition
- Rods. Sheets. Profiles / Solid
- Odor
- Odorless
- Insoluble in
- Water
- Mechanical Properties
- Physical Properties
- Thermal Properties
- Typical Properties
- Electrical Properties
- Additional Information
| Value | Units | Test Method / Conditions | |
| Tensile Strength at Yield | 37 | MPa | ISO 527 |
| Elongation at Yield (S) | 7 | % | ISO 527 |
| Tensile Strength at Break | 33 | MPa | ISO 527 |
| Elongation at Break (R) | 8 | % | ISO 527 |
| Impact Strength (an) | 333 | kJ/m2 | ISO 179 |
| Notch impact Strength (ak) | 37 | kJ/m2 | ISO 179 |
| Ball Indentation (Rockwell Hardness) | R 105 | MPa | ISO 2039 |
| Hardness | 70 | Shore D | ISO 868 |
| Flexural Strength (B 3,5 %) | 67 | MPa | ISO 178 |
| Modulus of elasticity (Et) | 2210 | MPa | ISO 527 |
| Value | Units | Test Method / Conditions | |
| Specific Gravity | 1.04 | - | ISO 1183 |
| Water Absorption | 0.4 | % | ISO 62 |
| Humidity Absorption | 0.1 | % | ISO 62 |
| Maximum Permissible Service Temperature | 70 | °C | UL746B |
| Lower Permissible Service Temperature | -50 | °C | UL746B |
| Value | Units | Test Method / Conditions | |
| Vicat Softening Point (VST/B/50) | 103 | °C | ISO 306 |
| Heat Deflection Temperature (HDT/B) | 100 | °C | ISO 75 |
| Heat Deflection Temperature (HDT/A) | 88 | °C | ISO 75 |
| Coefficient of Linear Thermal Expansion | 0.8 | K-1.10-4 | ISO 11359 |
| Glass Transition Temperature (Tg) | 145 | °C | ISO 3146 |
| Melting Temperature (Tm) | 145 | °C | ISO 3146 |
| Value | Units | Test Method / Conditions | |
| Density | 1.0 - 1.1 | g/cm³ | - |
| Melting Temperature | min. 140 | °C | - |
| Thermal Decomposition | min. 300 | °C | - |
| Value | Units | Test Method / Conditions | |
| Surface Resistivity (Ro) | min. 10^13 | Ω | IEC 60093 |
| Value | Units | Test Method / Conditions | |
| Bondability | Yes | - | - |
| Physiological Indifference (FDA) | Yes | - | - |
| Flammability | HB | - | UL 94 |
| Limiting Oxygen Index (LOI, 9) | 20 | % | ASTM D2863 |
Regulatory & Compliance
- Certifications & Compliance
Technical Details & Test Data
- Fire-fighting Measures
Suitable extinguishing agents
Water, foam, dry chemical, carbon dioxide (CO2).
Potential combustion products
Carbon dioxide (CO2), carbon monoxide (CO). marks of hydrogen cyanide. Formation of further decomposition and oxidation products depend upon the fire conditions. Under special fire conditions traces of other toxic substances are possible.
Special protective equipment
Wear a self-contained breathing apparatus.
Further information
Dispose of fire debris and contaminated extinguishing water in accordance with official regulations..
Safety & Health
- Safety Measures
The general industrial safety measures should be considered. A thermal damage during machining should be avoided.
Storage & Handling
- Machining
The product can be machined with standard machinery and tools. Before machining the product should be stored at room temperature 24 h. Evacuate swarf to prevent slipping or tripping. Observe the maximum allowable concentration of dust levels on the working area which apply in your country. Wear safety goggles during machining.
- Storage
The products shall be stored indoor to keep away from ionizing radiation, chemicals, …