Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Solvent System
- Mixed Hydrocarbons, Xylene, or 1500 Thinner
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Markets
- Cure Method
- Suggested Uses
GE 9921 is suggested for equalizing voltage stress on the insulation surfaces of cables, transformers, and rotating equipment. It is not suitable for normal paint-typeapplications.
It is used for coating insulation surfaces to prevent of decrease corona discharge and resulting damage. 9921 will conduct these high voltage charges to ground due to its low surface resistivity. Such voltages are induced on the on the outside of high voltage coils of generators and other electrical equipment.
- Applications
GE 9921 may be applied by brush or spray. This material should be constantly agitated during use. Surfaces to be painted should be clean and dry. Reduction: Brush or Spray- Use at can consistency for application under normal
- Surface Preprations
Surfaces to be painted should be dry and free from dirt, wax, grease, rust, and oil. Remove grease and oil by washing surface with mineral spirits.
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Air Dry - Tack Free | 1.0 | hours | - |
| Coverage (1 mil dried film) | approx. 736 | ft.2/gal | - |
| Hard Air Dry Time | Overnight | - | - |
| Flash Point | max. 80 | °F | - |
| Solids by Weight | average. 37.0 | % | - |
| Surface Resistivity | 3,000-32,000 | ohms per square | - |
Safety & Health
- Hazards
Keep away form heat, sparks, and open flame. Avoid prolonged contact with skin and breathing of vapor or spray mist. Close container after each use. Use with adequate ventilation.