Glyptal

Glyptal® 1201 is excellent as a general purpose paint. Available in quarts, gallon, 5 gallon pails and drum containers ready for brushing. May be thinned for spray applications.

Glyptal® 1201 Light Blue meets MIL-E22118. It is used for coils, armatures and other electrical apparatus. Also used as a primer, sealer for screws, pipes, vacuum systems and hydraulic fluid chambers.

Glyptal® 1201A is a aerosol-spray version of 1201 is packed for con-venience and greater econonomy in a large, 361-gram can. Pressurant is non-fluorocarbon.

Glyptal® 1201B is a modified 1201, having greater viscosity and designed for use in applications where a heavier film is required for thread sealing gasket; may be used in vacuum atmospheres.

Glyptal® 1209 BLACK ENAMEL is an air drying or baking gloss interior enamel which was designed for its resistance properties as well as being a protective and decorating coating for electrical equipment. It is similar to Glyptal® 1201 RED and will give very good oil resistance and good salt spray resistance as well as excellent non-tracking and arc resistance.

Glyptal® 74004 is designed to give maximum durability and resistance; used on industrial equipment exposed to oils, coolants and other corrosive agents; frequently used on large end windings.

Glyptal® 7815 GLOSS BLACK ENAMEL is a fast air-drying or low-temperature bake finish. This product is designed for use as a black, gloss finish coat on motor end windings and electrical equipment. This paint is compatible with most insulating systems. It has excellent oil, humidity and weather resistance. 7815 can be used in areas where some exterior durability is required along with fast-drying properties.

Glyptal® C1149 is an air-drying, 2-part epoxy enamel designed to give maximum durability and a high degree of chemical resistance. Because of this durability and chemical resistance, this product is well-suited for use as a machinery enamel where resistance to oil, coolants, and other corrosive agents is essential. This product provides excellent adhesion to cleaned steel surfaces and may be used as a primer, intermediate, and/or topcoat.

Glyptal® CE237 is an air-drying or baking enamel. This material has very good oil, chemical, and corrosion resistance. It offers a tough durable film along with excellent arc resistance.

Glyptal® CE387 is an air-dry epoxy enamel designed to give maximum durability and a high degree of chemical resistance. Because of the durability and chemical resistance, this product is well suited for use as a machinery enamel where resistance to oil, coolants, and other corrosive agents is essential. CE-387 provides excellent adhesion to cleaned steel surfaces. CE-387 is ideally suited for all interior surfaces where maximum durability is required. Often used on windings.

Glyptal® 1202 INSULATING VARNISH is a clear air-drying , insulating, and finishing varnish designed for applications where oil, moisture, and acid-resistant coatings are desired. This fast-drying, synthetic-resin-type varnish is often used as a final coat over other varnishes, giving a hard, glossy protective coating. Glyptal® 1202 Varnish has excellent heat resistance and will operate as a finish coat at temperatures up to 145 ºC on an apparatus that is not flexed. Although primarily an airdrying varnish, the oil, moisture, acid, and salt water resistance are greatly improved by baking. Glyptal® 1202 has excellent adhesion to most materials. It has excellent dip tank stability where the proper thinners are used.

Glyptal® 9620 INSULATING VARNISH is a clear air-drying , insulating, and finishing varnish designed for applications where oil, moisture, and acid-resistant coatings are desired. This fast-drying, synthetic-resin-type varnish is often used as a final coat over other varnishes, giving a hard, glossy protective coating. Glyptal® 9620 Varnish has excellent heat resistance and will operate as a finish coat at temperatures up to 130ºC on an apparatus that is not flexed. Although primarily an airdrying varnish, the oil, moisture, acid, and salt water resistance are greatly improved by baking. Glyptal® 9620 has excellent adhesion to most materials. It has excellent dip tank stability where the proper thinners are used.