Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- CAS No.
- 25068-38-6
- Technologies
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Markets
- Applications
- Directions for Use
LEEBOND 15-93-1 can be mixed, poured and cured at room temperature. Measure out the proportionate quantities of Parts A and B and mix thoroughly, scraping the sides and bottom of the container. For lower viscosity, Part A can be warmed to around 100oF before mixing in the Part B.
Properties
- Appearance
- Brown liquid, Black liquid
- Typical Properties
Value | Units | Test Method / Conditions | |
Hardness Part A (25ºC) | 80 | Shore D | — |
Viscosity (25ºC) (Part A) | 70000 | cps | — |
Hardness Part B (25ºC) | 80 | Shore D | — |
Density (PART A) | 13.1 | lbs./gal | — |
Specific Gravity (PART A) | 1.6 | g/ml | — |
Mix Ratio, by volume (PART A) | 100 | — | — |
Mix Ratio, by weight (PART A) | 100 | — | — |
Gel Time (25ºC) (100 g) (PART A) | 40 | minutes | — |
Green Strength (25ºC) (PART A) | 24 - 48 | hours | — |
Full Cure Time (25ºC) (PART A) | 7 | days | — |
Viscosity (25ºC) (Part B) | 8800 | cps | — |
Density (PART B) | 13.1 | lbs./gal | — |
Specific Gravity (PART B) | 1.6 | g/ml | — |
Mix Ratio, by volume (PART B) | 50 | — | — |
Mix Ratio, by weight (PART B) | 50 | — | — |
Gel Time (25ºC) (100 g) (PART B) | 40 | minutes | — |
Green Strength (25ºC) (PART B) | 24 - 48 | hours | — |
Full Cure Time (25ºC) (PART B) | 7 | days | — |
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Safety
Avoid skin contact when using this product. LEEBOND 15-93-1 may cause skin sensitization or allergic reactions. For specific information refer to the product Material Safety Data Sheet
Storage & Handling
- Storage
LEEBOND 15-93-1 should be stored in closed containers to prevent moisture contamination. It should not be stored in areas subject to extreme temperatures.
- Shelf life
12 months