Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Fillers Included
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Product Highlights
Printable on most FDM printers, naturally UV resistant, and usable up to 80°C this filament is ideal for structural pieces, be it indoor or outdoor.
- Advantages
- UV resistant.
- Water resistant.
- Easy to print.
- Good dimensional control.
Applications & Uses
- Markets
- Plastics & Elastomers Processing Methods
- Application Recommendations
Printing
In order to protect your equipment we recommend using a nozzle adapted for abrasive materials.
Post treatment
For an outdoor usage, it’s recommended either paint or apply a protective UV coating.
Properties
- Flame Rating
- Physical Form
- Mechanical Properties
- Typical Properties
- Thermal Properties
Value | Units | Test Method / Conditions | |
Density | 1.11 | g/cm3 | ISO 1183 |
Tensile Modulus | 4700.0 | Mpa | ISO 527 |
Flexural modulus | 3800.0 | Mpa | ISO 178 |
Elongation at Break | 2.0 | % | ISO 527 |
Stress at Break | 42.0 | MPa | ISO 527 |
Charpy (Notched) | 20.0 | KJ/m2 | — |
Value | Units | Test Method / Conditions | |
Extrusion Temperature (3D Printing) | 200 - 240 | °C | — |
Plateau Temperature (3D Printing) | 70 - 90 | °C | — |
Enclosure Temperature (3D Printing) | Ambiant | °C | — |
Nozzle (3D Printing) | min. 0.4 | mm | — |
Printing speed (3D Printing) | 20 - 60 | mm/s | — |
Diameter | 1.75 (+/- 50) | mm(µm) | — |
Linear Weight (3D Printing, Ø 1.75 mm) | 2.66 | g/m | — |
Linear Weight (3D Printing, Ø 2.85 mm) | 7.06 | g/m | — |
Value | Units | Test Method / Conditions | |
Glass Transition Temperature | 85.0 | °C | — |
DTUL | 80.0 | °C | — |
Flammability (1.6 mm) | HB | — | UL 94 |
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Health and Safety
Printing
We recommend printing Nanovia PETg CF in a room equipped with air extraction or by using appropriate breathing equipment.
Post treatmentWe recommend wearing standard safety equipment during the post treatment of your prints made with Nanovia PETg CF.
Packaging & Availability
- Packaging Type
- Packing
-
Spools are packed in individual boxes, sous-vide with desiccant. Spools are equipped with both material traceability and a production series number.
Other sizes are available up to 25kg on demand.
Spool L1 L2 D1 D2 D3 Weight 500g 55 45 200 105 52 252 g 2kg 100 90 300 210 52 640 g
Storage & Handling
- Storage
- Store Nanovia PETg CF in a dry and dark location, if possible with a desiccant.
- In order to guarantee good printing conditions dehydrate Nanovia PETg CF at 60°C for 4 hours or longer, when the spools has been exposed to moisture for an extended period.