Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Freeze-thaw stability
- Excellent
- Stabilizing System
- anionic / non-ionic
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Product Highlights
Stabilizing system: Anionic / non-ionic
Principle Properties:
- Strong binding power.
- Excellent flexibility.
- Very good washability even at high PVC values.
- Plasters and texture coatings
Applications & Uses
- Markets
- Applications
- Superior interior and exterior emulsion based paints with extended wet scrub and alkali resistance.
- Matt and semi-gloss paints.
- Low cost highly extended interior paints
- Processing Notes
Pigmenting can be done in the normal way by mixing the pigments and extenders with the usual additives and water in a paste. Addition of a dispersing agent in small amounts in
combination with sodium hexametaphosphate or tripolyphosphate is strongly recommended. The polymer dispersion should be added only after the required degree of grinding has been achieved.
Incorporation of good coalescent solvents like Texanol (Eastman) will yield better results in film washability.
Many thickeners are used to adjust the desired viscosity of the paint and to improve its processability. Very good results are achieved by employing cellulose ethers with retarded swelling and medium to high molecular weight. Also urethane and acrylic thickeners can be used.
A lot of commercially available defoamers can be included in order to prevent excessive foaming in the paints, trials must be carried out to determine the most suitable grades and the correct concentration. Organic pigments should be tested for their suitability for exterior paints, especially in the case of pasted tones.
Properties
- Appearance
- Clear
- Typical Properties
Value | Units | Test Method / Conditions | |
Density | 1.05 ± 0.02 | g/cm3 | — |
Minimum film forming temperature (MFFT) | 13 - 14 | ºC | — |
Particle Size | approx. 0.2 - 0.7 | um | — |
pH Value | 4 - 6 | — | — |
Solid Content | 50 ± 1 | % | — |
Viscosity (23ºC, sp 4 Brookfield viscometer RVT 20 rpm) | 2000 - 4000 | mPa·s | — |
Safety & Health
- Safety
Industrial Safety and Environmental Protection:
Not hazard Substance according to the current dangerous substance regulations.
Storage & Handling
- Storage & Stability
POLIVA EP-New is stable for at least 1 year when stored between +5 and +40 o C Do not store latex under freezing condition. When containers are open they should be used as soon as possible or be resealed to prevent drying up.