Knowde Enhanced TDS
Identification & Functionality
- Polymer Name
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Usage Recommendations
- It is recommended that BOPP film should be tempered at operating room temperature for 24 hours before use
- Metalized films should be laminated because the metal layer is not resistant to scratches
- Before printing on metalized films, it is strongly recommended to apply a primer
Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Average Thickness Deviation | 2.5 | % | — |
Yield | 52.15 - 57.64 | m²/kg | — |
Unit Weight | 17.29 - 19.11 | g/m² | — |
Gloss (45°) | 88 - 92 | — | ASTM D 2457 |
Haze | 1.3 - 1.7 | % | ASTM D 1003 |
Coefficient of Friction | 0.3 - 0.5 | — | ASTM D 1894 |
Shrinkage (MD, 120°C, 5 min) | 4.0 | % | BMS TT 0.2 |
Shrinkage (TD, 120°C, 5 min) | 3.0 | % | BMS TT 0.2 |
Elongation at Break (MD) | 160 - 220 | % | ASTM D 882 |
Elongation at Break (TD) | 40 - 100 | % | ASTM D 882 |
Tensile Strength (MD) | 120 - 180 | MPa | ASTM D 882 |
Tensile Strength (TD) | 220 - 280 | MPa | ASTM D 882 |
Surface Treatment | min. 40 | dynes/cm | ASTM D 2578a |
Regulatory & Compliance
- Food Contact
The BOPP Film complies with all national and international standards and requirements for food contact.
Technical Details & Test Data
- Film Layer Representation
Packaging & Availability
- Packing
Core Diameter Outer Diameter (*) Notes Vertical
152 mm (6') max. 550 mm
max. 700 mm – two or more rows
min. 700 mm – one row76 m (3') Horizontal
152 mm (6') max. 770 mm
76 m (3') (*) In case of no other requirements.
- Tolerances
Weight Tolerance, depending on the order volume Width Tolerance Length Tolerance max. 800 - 1200 ±2 mm ±5 % 900 - 11000 min. 9500 - 10500
Storage & Handling
- Storage and Transportation Terms & Conditions
- Palletizing of goods is done according to customer’s requirements
- The storage of all goods is in dry, covered and clean warehouses
- The transportation of the goods is carried out in dry, covered and clean means of transport
- The recommended temperature of storage/transportation is 10-30°C. If the temperature is not within the recommended limits, the following issues may occur:
- Decrease of dyne level
- Higher haze of the film
- Poor adhesion of the film surface that on a later stage could be an issue for laminating and printing
- Extremely low COF that can trouble further processing
- Excessive humidity can be a reason for film blocking
- Adherence to the above mentioned storage conditions ensures that the film is suitable to be used up to 6 months after production