Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Segments
Nutraceuticals & Supplements
undefined
View All
HI&I Cleaning & Formulating
Chemical Manufacturing
Pharmaceuticals
Pulp & Paper
Oil & Gas
Agriculture & Feed
Case & Construction
Formulated Adhesives & Coatings
Food & Nutrition
Personal Care
Mining
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde for Suppliers
Browse
Sample
Chat
Request
Search
Products
Polikim
All Polikim
Search products
Matching Product Categories
Plastics
Composite Materials
Markets
Physical Form
All Filters
15 Products found on Polikim
Most Viewed
TDS
With TDS
KESTLUB®
Polymer Name:
Polyamide 6 (PA 6)
Physical Form:
Rods, Sheets, Tube
Features:
Dimensional Stability, Wide Temperature Operating Range, Good Abrasion Resistance, Good Weather Stability, Self Lubricating, Wear Resistant
Density:
1150.0 - 1150.0 kg/m³
Tensile Modulus:
4000.0 - 4000.0 MPa
Color:
Red
Kestlub® is one of the most important developments in the Kestamid® product range. Kestlub® is a special type of cast polyamide ideal for bearings. It is produced by adding lubricants to cast polyamide through special processes. It performs extremely well in bearing applications as it is self-lubricated.
Efalon® Glass-filled C-25
Polymer Name:
Polytetrafluoroethylene (PTFE)
Reinforcement Material:
Glass Fibers
Physical Form:
Tube, Rods, Sheets
Density:
2200.0 - 2300.0 kg/m³
Features:
Creep Resistant, Medium Hardness, Low Deformation Tendency, Good Compressive Strength, Wear Resistant, Low Thermal Expansion, High Coefficient of Friction
Efalon® Glass-filled C-25 is a PTFE glass filled is reinforced with glass fibers with the percentage 15% and 25% depending on the needs of the application.
Ulpolen® 500
Polymer Name:
Ultra High Molecular Weight Polyethylene (UHMWPE)
Physical Form:
Sheets
Features:
Good Weather Stability, Good Machinability, Impact Resistance, Light Weight, Wear Resistant, Low Density, Electrically Insulating, Chemical Resistant
Density:
940.0 - 940.0 kg/m³
Ulpolen® 500 offers increased wear resistance and impact strength compared to HDPE. It is extremely strong, has excellent resistance to chemicals and low temperatures and has very low moisture absorption. Ulpolen®PE300-HDPE (high-density polyethylene) offers excellent impact resistance, light weight, low moisture absorption, and high tensile strength. HDPE is also non-toxic and non-staining and meets FDA and USDA certification for food processing.
Efalon® Bronze-filled B-60
Polymer Name:
Polytetrafluoroethylene (PTFE)
Physical Form:
Rods, Sheets, Tube
Features:
Good Compressive Strength, Thermally Insulating, Good Machinability, Good Thermal Conductivity, Low Deformation Tendency, Wear Resistant
Density:
3800.0 - 4000.0 kg/m³
Efalon® Bronze-filled B-60 is added in percentages of weight between 40 and 60%. PTFE Bronze filled has the best wear properties, remarkable compression strengths and good thermal conductivity, but poor electrical characteristics and chemical resistance. It is often used in hydraulic systems, particularly superb as linear bearings, e.g. slides, gibs, guide ways. The compound is easily machined. Bronze-filled is useful in applications which undergo high mechanical loads or high-speed rubbing contacts where the bronze filler supplies the strength and conductivity to carry away excess, unwanted heat.
Ulpolen® 300
Polymer Name:
Ultra High Molecular Weight Polyethylene (UHMWPE)
Physical Form:
Sheets
Features:
Good Weather Stability, Good Machinability, Impact Resistance, Light Weight, Wear Resistant, Low Density, Electrically Insulating, Chemical Resistant
Density:
940.0 - 940.0 kg/m³
Ulpolen® 300 offers increased wear resistance and impact strength compared to HDPE. It is extremely strong, has excellent resistance to chemicals and low temperatures and has very low moisture absorption. Ulpolen®PE300-HDPE (high-density polyethylene) offers excellent impact resistance, light weight, low moisture absorption, and high tensile strength. HDPE is also non-toxic and non-staining and meets FDA and USDA certification for food processing.
KESTAMID-HS®
Polymer Name:
Polyamide 6 (PA 6)
Physical Form:
Sheets, Rods, Tube
Features:
Good Machinability, Very Good Heat Resistance, Chemical Resistant, Wear Resistant, Impact Resistance, Wide Temperature Operating Range
Density:
1150.0 - 1150.0 kg/m³
Tensile Modulus:
4000.0 - 4000.0 MPa
Color:
Blue
Kestamid-HS® is Polikim’s cast polyamide with increased heat resistance.
Efalon® Bronze-filled B-40
Polymer Name:
Polytetrafluoroethylene (PTFE)
Physical Form:
Rods, Sheets, Tube
Features:
Good Compressive Strength, Thermally Insulating, Good Machinability, Good Thermal Conductivity, Low Deformation Tendency, Wear Resistant
Density:
3050.0 - 3150.0 kg/m³
Efalon® Bronze-filled B-40 is added in percentages of weight between 40 and 60%. PTFE Bronze filled has the best wear properties, remarkable compression strengths and good thermal conductivity, but poor electrical characteristics and chemical resistance. It is often used in hydraulic systems, particularly superb as linear bearings, e.g. slides, gibs, guide ways. The compound is easily machined. Bronze-filled is useful in applications which undergo high mechanical loads or high-speed rubbing contacts where the bronze filler supplies the strength and conductivity to carry away excess, unwanted heat.
KESTOIL®
Polymer Name:
Polyamide 6 (PA 6)
Physical Form:
Rods, Sheets, Tube
Features:
Corrosion Resistant, Low Water Absorption, Good Abrasion Resistance, Good Machinability, Wear Resistant, Dimensional Stability, Chemical Resistant, Self Lubricating
Density:
1140.0 - 1140.0 kg/m³
Tensile Modulus:
4000.0 - 4000.0 MPa
Color:
Green
Kestoil® is a self-lubricated, strong, wear resistant engineering plastic with a low coefficient of friction
KESTAMID-GRF®
Polymer Name:
Polyamide 6 (PA 6)
Fillers Included:
Graphite
Kestamid-GRF® has a high degree of crystallinity and better hardness and compression strength properties compared to standard Kestamid®. It has a low coeffient of friction and a high degree of abrasion resistance. It has good weatherability and UV resistance properties and can be more easily mechanically machined compared to standard Kestamid®. It also can be used in higher temperatures compared again to the standard type.
Ulpolen® 1000
Polymer Name:
Ultra High Molecular Weight Polyethylene (UHMWPE)
Physical Form:
Sheets
Features:
Good Weather Stability, Good Machinability, Impact Resistance, Light Weight, Wear Resistant, Low Density, Electrically Insulating, Chemical Resistant
Density:
940.0 - 940.0 kg/m³
Ulpolen® 1000 (PE1000) is a type of polyethylene with average molecular weight over 5 million. ULPOLEN1000®’s resistance to impact and wear is much higher than that of other plastics in a wide temperature interval.
POM-C(Delrin)®
Polymer Name:
Polyacetal Copolymer (POM)
Physical Form:
Rods
Features:
Excellent Rigidity, Excellent Mechanical Strength, Good Machinability, Wear Resistant, Electrically Insulating, Dimensional Stability, Chemical Resistant, Semi Crystalline, High Strength, Low Moisture Absorption
Density:
1420.0 - 1420.0 kg/m³
Tensile Modulus:
2800.0 - 2800.0 MPa
Color:
White, Natural, Black
POM-C(Delrin)® is a semi crystalline thermoplastic with high mechanical strength and rigidity. The good dimensional stability and particularly good fatigue strength, as well as excellent machining ability, makes POM polymer a highly versatile engineering material, even for complex components.
Efalon® Glass-filled C-15
Polymer Name:
Polytetrafluoroethylene (PTFE)
Reinforcement Material:
Glass Fibers
Physical Form:
Tube, Rods, Sheets
Density:
2150.0 - 2250.0 kg/m³
Features:
Creep Resistant, Medium Hardness, Low Deformation Tendency, Good Compressive Strength, Wear Resistant, Low Thermal Expansion, High Coefficient of Friction
Efalon® Glass-filled C-15 is a PTFE glass filled is reinforced with glass fibers with the percentage 15% and 25% depending on the needs of the application.
Efalon® Carbon-filled K-35
Polymer Name:
Polytetrafluoroethylene (PTFE)
Reinforcement Material:
Carbon Fibers
Physical Form:
Rods, Sheets, Tube
Density:
2000.0 - 2100.0 kg/m³
Features:
Low Deformation Tendency, Wear Resistant, Low Thermal Expansion, Excellent Mechanical Strength, Corrosion Resistant, Thermally Insulating
Efalon® Carbon-filled K-35 is a PTFE carbon filled(C25 and C35) have less thermal expansion, higher wear resistance, less deformation under load properties compared to virgin Efalon®. Carbon filled PTFE has excellent mechanical and wear properties, retains the excellent frictional properties and is an excellent choice for seals and rings in dynamic and high pressure applications.
Efalon® Carbon-filled K-25
Polymer Name:
Polytetrafluoroethylene (PTFE)
Reinforcement Material:
Carbon Fibers
Physical Form:
Rods, Sheets, Tube
Density:
2050.0 - 2150.0 kg/m³
Features:
Low Deformation Tendency, Wear Resistant, Low Thermal Expansion, Excellent Mechanical Strength, Corrosion Resistant, Thermally Insulating
Efalon® Carbon-filled K-25 is a PTFE carbon filled(C25 and C35) have less thermal expansion, higher wear resistance, less deformation under load properties compared to virgin Efalon®. Carbon filled PTFE has excellent mechanical and wear properties, retains the excellent frictional properties and is an excellent choice for seals and rings in dynamic and high pressure applications.
KESTAMID®
Polymer Name:
Polyamide 6 (PA 6)
Physical Form:
Rods, Sheets, Tube
Features:
Good Abrasion Resistance, Impact Resistance, Wear Resistant
Density:
1150.0 - 1150.0 kg/m³
Tensile Modulus:
4000.0 - 4000.0 MPa
Color:
Yellow
Polikim Kestamid®(PA6G-Cast Nylon) is one of the most commonly used engineering plastics.