Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Fillers Included
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Key Benefits
- High resistance to deformation under load, wear and cold flow
- High heat insulation
- Less chemical resistance compared to carbon and glass-filled Efalon®
- Easily processed mechanically
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Applications
- Bearings
- Piston rings
- Valve sets
- Valve components
Properties
- Mechanical Properties
- Physical Properties
- Typical Properties
- Thermal Properties
- Electrical Properties
Value | Units | Test Method / Conditions | |
Tensile Strength at Break | 150 - 280 | Kg/cm² | D638 |
Compressive Stress (%1 Deformation, 23°C) | 100 - 105 | Kg/cm² | D695 |
Total Deformation | 3.8 - 4.9 | % | D621 |
Permanent Deformation | 1.4 - 2.1 | % | D621 |
Elongation at Break (23°C) | 120 - 280 | % | D638 |
Impact Resistance (Izod, Notched) | 11 - 12 | Kj/m² | D256 |
Hardness | 64 - 68 | Shore D | D2240 |
Total Deformation Under Weight (10 kg/cm² Load, 150°C, 24 hours) | 1.1 - 1.2 | % | - |
Total Deformation Under Weight (50 kg/cm² Load, 150°C, 24 hours) | 10 - 11 | % | - |
Value | Units | Test Method / Conditions | |
Coefficient of Friction (Static) | 0.06 | - | - |
Coefficient of Friction (Dynamic) | 0.12 | - | - |
PV Limits (3 m/min) | 250 - 270 | kg.cm³.min | - |
PV Limits (30 m/min) | 350 - 380 | kg.cm³.min | - |
PV Limits (300 m/min) | 400 - 500 | kg.cm³.min | - |
Value | Units | Test Method / Conditions | |
Density (23°C) | 3.05 - 3.15 | g/cm³ | D792 |
Value | Units | Test Method / Conditions | |
Coefficient of Linear Thermal Expansion (25°C-100°C, [x10^-5]) | 8 - 9.5 | °C-1 | D696 |
Coefficient of Linear Thermal Expansion (25°C-100°C, [x10^-5]) | 9.5 -11 | °C-1 | D696 |
Coefficient of Linear Thermal Expansion (25°C-100°C, [x10^-5]) | 12.5 - 13.5 | °C-1 | D696 |
Heat Conductivity (30°C, [x10^-4]) | 17 - 20 | Cal/cm.sn.°C | - |
Maximum Allowable Service Temperature in Air - Continuous | 270 | °C | - |
Maximum Allowable Service Temperature in Air - Continuous | -260 | °C | - |
Value | Units | Test Method / Conditions | |
Surface Resistivity (23°C, RH 50%) | min. 10^10 | Ohm | D257 |
Surface Resistivity (23°C, 50% RH) | min. 10^10 | Ohm | D257 |
Volume Resistivity (23°C) | min. 10^8 | Ohm-cm | D257 |