Knowde Enhanced TDS
Identification & Functionality
- Composite Materials Functions
- Technologies
Applications & Uses
- Markets
Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Surface Resistance | 10^13 | Ohm | IEC 60093 |
Shrinkage | 0,03 | % | ISO 2577 |
Specific Density | 1,35 | g/cm3 | ISO 1183 A |
fibre length | 25 | mm | PA 3.01 |
impact strength | 65 | KJ/m2 | ISO 179 |
tracking resistance | CTI 600 | level | IEC 60112 |
Flexural modulus | 8 | N/mm2 | ISO 14125 |
heat distortion temperature | min. 200 | °C | ISO 75-2 |
surface weight | 3 | g/m2 | ISO 10352 |
fibre Content | 35 | % | ISO 1172 |
Water absorption | max. 50 | mg | ISO 62 |
Flexural strength | 145 | N/mm2 | ISO 14125 |
Curing Time | 95 | sec | ISO 12114/1 |
burning behaviour | max. 30 | mm/min | FMVSS 302 |
Storage & Handling
- Handling and Storage
- Storage condition store dry at max
- 25 °C and out of direct sun light
- Molding time > 25 sec
- /mm
- Molding pressure 60 - 80 bar
- Molding temperature 135 - 155 °C