company tower banner
Resin Technology Group Company Logo

Resin Technology Group EN 239-2 Cationic UV Cure Epoxy Adhesive

Resin Technology Group EN 239-2 Cationic UV Cure Epoxy Adhesive is an epoxy-based, medium viscosity, cationic- curable adhesive/sealant. This product is activated by exposure to medium intensity UV radiation resulting in a high strength, chemical resistant, low out-gassing polymer system capable of surviving exposure up to 200°C.

Product Type: Epoxy Adhesive, Radiation Curable Coating

Compatible Substrates & Surfaces: Plastics, Polyvinyl Chloride (PVC)

Cure Method: Radiation Cure

Chemical Family: Epoxy & Epoxy Derivatives

    Knowde Enhanced TDS

    Identification & Functionality

    Composition
    Epoxy
    Processing

    UV light cure: Intensity of 200 mw/cm2; Spectral output of 300 to 500 nanometers; Optimum wavelength of 375 nanometers

    Recommended Aurora UV light sources:

    • Aurora 455-S 5x5 High Intensity Flood
    • Aurora 461-S 1x6 High Intensity Beam
    • Aurora 100-S Spot Light Guide

    Features & Benefits

    Ready-to-Use Product Features

    Applications & Uses

    Compatible Substrates & Surfaces
    Cure Method

    Properties

    Mechanical Properties
    ValueUnitsTest Method / Conditions
    Elongation at Break8.0%
    Hardness85Shore D
    Shear Strength41.4MPa
    Physical Properties
    ValueUnitsTest Method / Conditions
    Specific Gravity1.16g/cc
    Viscosity (Temperature 25.0 °C)6800.0cP
    Thermal Properties
    ValueUnitsTest Method / Conditions
    Flash Pointmin. 93.3°C
    Glass Transition (Temp, Tg)130.0°C
    Maximum Service (Temperature, Air)160.0°C
    Maximum Service (Temperature, Air)-50.0°C
    Moisture ResistanceExcellent
    Optical Properties
    ValueUnitsTest Method / Conditions
    Transmission, Visible80.0%

    Safety & Health

    Toxicity

    Low