Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Chemistry
- Hybrid Polymer
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Features
- Solvent and isocyanate free, 100% solids
- Non-silicone
- Non-flammable
- Fast-curing
- Primerless bonding to most surfaces
- Paint compatible
- Low odor
- Extremely low shrinkage
- Non-staining
- Mildew resistant
- High Performance Durability
- SB 435 can be installed on damp surfaces which is defined as when no moisture is transferred to the skin when the substrate is touched.
- The cured bead exhibits excellent long-term adhesion to the porous surfaces.
- Does not dry or become brittle.
- Low odor, ideal for indoor and outdoor use.
Applications & Uses
- Markets
- Applications
- Application Method
- Compatible Substrates & Surfaces
- Applications
- Roofing
- Parapets
- Window and door frames
- Block and masonry
- Expansion joints
- Siding
- Weather sealing
- Cove joints
- Product Application
Application
Remove all dirt, oil, loose paint, frost and other contamination from all working surfaces. Maintain SB 435 at room temperature before applying to ensure easy gunning and tooling. Test and evaluate to ensure adequate adhesion. Carefully gun the sealant with a smooth, continuous bead. If tooling is needed, do so within fifteen minutes of application.
Concrete
Prior to application remove any residual contamination by mechanical abrasion, sand blasting or power washing. On green concrete, remove all release agents and loose concrete. Dry all visible and/or standing water. Install an appropriate backer rod to avoid three-point bonding.
Metal
Prepare all metal to ensure maximum adhesion. Remove all rust, scale and residue using a wire brush. Remove films, loose or inappropriate coatings and oils with an appropriate solvent such as alcohol. Seal Bond recommends that coated substrates be tested for proper adhesion prior to starting a project to determine suitability for use.
Wood
Wood should be clean, sound and dry prior to sealant application. Allow treated wood to weather for six months prior to application. Remove all coatings and paint to ensure proper adhesion. SB 435 is not recommended for use on fire retardant lumber.
Priming
In most applications SB 435 will not require a primer. However, certain substrates may require a primer to ensure a long lasting bond and weatherproof seal. It is the applicator’s responsibility to determine whether or not a primer is needed in their specific application.
Clean-up
Clean tools and any uncured adhesive with mild solvent such as mineral spirits.
- Limitations
SB 435 should not be used in applications in which it will be permanently exposed to liquid water.
Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
VOC | 34.5 | g/L | EPA Test Method 24 |
Skinover Time (50% RH, 70°F) | 30.0 | min | ASTM C679 |
Density | 12.7 | lb/gal | — |
Hardness | 50.0 | — | Shore A |
Shear Strength | 185.7 | psi | ASTM D1002 |
Peel Strength (ABS Plastic) | 12.7 | lbf/in | ASTM D903 |
Peel Strength (Aluminum) | 25.1 | lbf/in | ASTM D903 |
Peel Strength (Mortar) | 25.7 | lbf/in | ASTM D903 |
Peel Strength (Glass) | 26.7 | lbf/in | ASTM D903 |
Peel Strength (Pine) | 24.0 | lbf/in | ASTM D903 |
Peel Strength (PVC) | 25.8 | lbf/in | ASTM D903 |
Peel Strength (Cold Rolled Steel) | 23.9 | lbf/in | ASTM D903 |
Tensile | 268.0 | psi | ASTM D412 |
Elongation at Break | 259.0 | % | ASTM D412 |
Movement | ±35 | % | ASTM C920 |
Shrinkage | 0.0 | % | — |
Service Temperature | -40 to 200 | °F | — |
Viscosity (1 rpm) | 2730000.0 | cps | ASTM D2196-10 |
Viscosity (2 rpm) | 1555000.0 | cps | ASTM D2196-10 |
Viscosity (10 rpm) | 460000.0 | cps | ASTM D2196-10 |
Regulatory & Compliance
- Certifications & Compliance
- Standards & Compliance
- May contribute to LEED V4 EQ Material Resource Credit 4.1 - Adhesives and Sealants
- ASTM C920, Type S, Grade NS, Class 35 Uses NT, T, G, A & O
- Federal Specification TT-S-00230-C Type II, Class B
- Corps of Engineers CRD-C-541, Type II, Class B
- Conforms to OTC Rule for Sealants and Caulks
- Meets requirements of California Regs: CARB, BAAQMD and SCAQMD
- Conforms to USDA Requirements for Non-food Contact
Technical Details & Test Data
- Test Data
SB 435 typical values represent data from multiple batches. Values will be refreshed, as necessary, upon data collection from additional campaigns and long-term variability discernment.
Safety & Health
- Precautionary Statements
- Do not use until all instructions and safety precautions have been read and understood.
- Wear protective gloves, protective clothing and eye protection.
- Wash contaminated clothing before reuse.
- Contaminated work clothing should not be allowed out of the workplace.
- If on skin - Wash exposed body areas with soap and water.
- If in eyes - Rinse with water, remove contact lenses and continue rinsing. If exposed or concerned get medical advice/attention.
Packaging & Availability
- Packaging & Availability
- 10.1 oz. (300 ml) cartridges - 24 tubes/case, 45 cases/pallet
- Available in colors, white, gray, black, aluminum gray, limestone, tan, medium bronze and dark bronze.
Storage & Handling
- Material Storage and Disposal
- Store securely between 60°F - 80°F in unopened container.
- Recommended shelf life is 12 months from date of manufacture on bottom of tube.
- Keep tube tightly sealed.
- Dispose of contents/container in accordance with Local/Regional/National/International Regulations.
- Shelf Life
The shelf life is 12 months for an unopened container from the date of manufacture.